2004 Chevy Tahoe 1500 4.8l V8 Auto Low Mileage 1 Owner 8 Passenger Seating on 2040-cars

Auto blog

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

Sunday Drive: Taking a gaze into the automotive crystal ball

Mankind has long been fascinated by the future. So it makes sense that this past week's top stories were all about cars, trucks, and SUVs that won't be hitting the market until the 2019 model year. And right at the top of the list is the Ram 1500. We've come to know Ram as the truck maker that styles its pickups with cues cribbed from big rigs, but that look has slowly evolved over time into something uniquely its own. The next Ram 1500 continues this trend, with a newly refined look that we can't wait to see in person. Up next is the 2019 Chevy Silverado. Pickup trucks have been, continue to be, and will remain the best-selling vehicles in America. And General Motors is a leader in the field, with two distinct offerings with which to entice buyers, one from the bread-and-butter Chevrolet brand and one wearing the slightly more upscale GMC badge. The Chevy looks to get LED lighting elements for 2019, which ought to keep the truck from looking dated when compared to the Ford F-150 and the previously mentioned Ram 1500. From there we move past pickup trucks and into SUVs and sedans. The 2019 Jeep Cherokee looks to get toned down a bit with its next refresh, and the '19 BMW 3 Series continues its slow evolutionary journey at the top of its aspirational sales pedestal. Finally, spy shots give way to official production reveals for the 2019 Audi A7 and Polestar 1. This pair of European luxury cars won't compete with one another – one is a rakish hatchback and the other a sports coupe – any further than for the eyeballs of our readers, but both proved popular enough to merit inclusion in our weekly roundup. As always, tune in to Autoblog next week for a front-row seat to all the happenings worth following in the automotive industry. 2019 Ram 1500 spotted without the classic crosshairs 2019 Chevy Silverado spied with new LED accents 2019 Jeep Cherokee reveals a much more normal face 2019 BMW 3 Series spy shots reveal production lights, new interior details 2019 Audi A7 revealed: More torque, refined styling Polestar 1 First Look | The 600 horsepower hybrid Scandinavian Green Audi BMW Chevrolet Jeep RAM Volvo Truck Hatchback SUV Future Vehicles Hybrid Luxury Performance Sedan sunday drive polestar 1

GM and Isuzu to partner for medium-duty commercial truck

General Motors is returning to the medium-duty truck business in the US for the first time since 2009 thanks to a new deal with longtime-partner Isuzu. The arrangement brings the Isuzu N-series models to Chevrolet dealers with the Bowtie's branding on them in 2016. There are six medium-duty Chevy models arriving at dealers in regular cab and crew cab bodies: the 3500, 3500HD, 4500, 4500HD, 5500, and 5500HD. The trucks will be sold as a bare chassis for buyers to outfit to their needs. Depending on model, customers will have the choice of an Isuzu-sourced 3.0-liter and 5.2-liter diesel engines or a 6.0-liter V8 gasoline-fueled engine from GM and six-speed gearbox. According to company spokesperson Bob Wheeler to Autoblog, the diesel models will be built in Japan and the rest assembled from knockdown kits in Charlotte, MI. This kind of vehicle sharing isn't uncommon for GM in the commercial segment, and it already partners with Nissan to use the Japanese brand's NV200 as the City Express van. The General also once owned a significant stake in Isuzu, and the two have remained collaborators even since then. Isuzu and GM Enter Commercial Vehicle Collaboration Agreement in the U.S. 2015-06-15 DETROIT and FUJISAWA, Japan – General Motors Co. (NYSE: GM) and Isuzu Motors (TSE 7202) have reached an agreement on a U.S. commercial vehicle collaboration, allowing Isuzu to strengthen its product lineup and GM to expand its commercial vehicle portfolio. Isuzu will produce low cab forward models for GM, based off of the Isuzu N-Series. The vehicles will be distributed by participating Chevrolet dealers in the U.S. market starting in 2016. To strengthen the product lineup, GM and Isuzu will explore the use of GM commercial vehicle components for Isuzu low cab forward trucks and GM will continue to produce and supply the 6.0L V-8 gas engine and six-speed transmission for Isuzu gasoline-powered low cab forward trucks. Isuzu and GM have maintained a strategic partnership for more than 40 years, producing collaborative business opportunities throughout the world. This agreement continues that tradition and reinforces a long-term relationship that helps to explore future collaborations in the U.S. commercial vehicle business. About General Motors General Motors Co. (NYSE:GM, TSX: GMM) and its partners produce vehicles in 30 countries, and the company has leadership positions in the world's largest and fastest-growing automotive markets.