1999 Chevrolet Tahoe Lt Sport Utility 4-door 5.7l on 2040-cars

Auto blog

2020 Chevy Trax spied sporting design cues from the new Blazer

We saw spy shots in August for what we thought was either a redesigned Chevrolet Trax or new GMC subcompact crossover. At the time we were leaning Chevy. But after this latest batch of spy shots taken near GM's proving grounds, we're now thinking this one is the Trax replacement and the other one was a GMC. For one, the thin row of LEDs looks remarkably similar to the 2019 Chevy Blazer's LED strip. The additional light slightly below that is similar to the Blazer as well, leading us to believe that the next Trax will have a Blazer-esque front end. At first glance, this vehicle looks slightly larger than today's Trax with a much brawnier shape than the current blob-like design. The rear roof cladding could be hiding the same sloped rear window with spoiler hangover we see on the Blazer. Circling back to the other small GM crossover we caught testing, this one doesn't have those Blazer elements. The curved windshield and sloping roof are like those of the GMC Terrain, as are the horizontal grille bars. By contrast, the above car has a straighter windshield and a roof shaped more like the Blazer. One element that does seem to diverge from the new Blazer are the taillights, but they don't exactly look production-ready anyway. If we're right about this being the next Trax (and we're pretty sure we are) then this looks to be a more distinctive vehicle than what it will replace. The mirrors have left their awkward spot on the doors, and it's shaping up to be a much sportier looking crossover as a whole. This vehicle will most likely end up being a 2020 model year car, and if so, we would expect to see undisguised photos of both it and the assumed GMC version next year. Related Video: Featured Gallery 2020 Chevrolet Trax spy shots Spy Photos Chevrolet GMC Crossover SUV Future Vehicles chevy trax

Electric Cadillac Lyriq, Chevy Bolt EUV and more GM electric cars are on the way

GM’s murky and somewhat secretive electric car plan is falling into place, as the company dumped a massive amount of information about whatÂ’s in the pipeline at an event at its Warren, Michigan campus today. New EVs are going to be popping up across the GM brand lineup, with new entries from Chevrolet, Cadillac, GMC and Buick in progress. We also learned some big news about GMÂ’s new Ultium battery tech today, but check out this story for all of those nitty-gritty details. The electric vehicle onslaught will begin with the Cadillac Lyriq, an electric SUV thatÂ’s already been teased out. Naming it the Lyriq is the news today. No explanation for the name was provided, so weÂ’ll have to wait for April to learn more. GM didnÂ’t specifically say if the Lyriq would be launched at the NY Auto Show, but that show (assuming coronavirus doesnÂ’t cancel it) will begin on April 8 this year. Next up in the order of events is the GMC Hummer electric truck that we know will be launching on May 20. This truck will use GMÂ’s modular Ultium battery technology. However, the wait to buy a GMC Hummer will be a long one, as the truck isnÂ’t going to dive into production until fall 2021 at GMÂ’s Detroit-Hamtramck plant. GM revealed that its new modular Ultium batteries can be configured anywhere from a 50 kWh pack to a 200 kWh pack depending on the application. Range is estimated to be about 400 miles on the upper end with the largest battery pack, and GM continues to boast about a 0-60 mph acceleration time of three seconds. Charging estimates for the Ultium battery-equipped Hummer EV were also provided. GM says its truck platform will have 800-volt battery packs and be capable of 350 kW fast-charging. Time estimates werenÂ’t given, but those numbers suggest the truck will be a rapid charger. The Hummer truck on hand, which was the same that previously starred in GMC's Super Bowl spot, showed off removable roof panels that store in the frunk, as well as what appeared to be a version of GMC's Multi-Pro tailgate. It also featured sail panels on the sides, similar to those in front of the bed of the Chevy Avalanche. In addition to the Hummer, expect to see a couple Chevys launching. GM says the refreshed Bolt EV will be launched “in late 2020” with a refreshed interior and what appear to be thicker front seats.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.