2013 Chevy Silverado 2500hd Crew 4x4 Diesel 6-pass 51k! Texas Direct Auto on 2040-cars

Auto blog

2020 Chevy Trax spied sporting design cues from the new Blazer

We saw spy shots in August for what we thought was either a redesigned Chevrolet Trax or new GMC subcompact crossover. At the time we were leaning Chevy. But after this latest batch of spy shots taken near GM's proving grounds, we're now thinking this one is the Trax replacement and the other one was a GMC. For one, the thin row of LEDs looks remarkably similar to the 2019 Chevy Blazer's LED strip. The additional light slightly below that is similar to the Blazer as well, leading us to believe that the next Trax will have a Blazer-esque front end. At first glance, this vehicle looks slightly larger than today's Trax with a much brawnier shape than the current blob-like design. The rear roof cladding could be hiding the same sloped rear window with spoiler hangover we see on the Blazer. Circling back to the other small GM crossover we caught testing, this one doesn't have those Blazer elements. The curved windshield and sloping roof are like those of the GMC Terrain, as are the horizontal grille bars. By contrast, the above car has a straighter windshield and a roof shaped more like the Blazer. One element that does seem to diverge from the new Blazer are the taillights, but they don't exactly look production-ready anyway. If we're right about this being the next Trax (and we're pretty sure we are) then this looks to be a more distinctive vehicle than what it will replace. The mirrors have left their awkward spot on the doors, and it's shaping up to be a much sportier looking crossover as a whole. This vehicle will most likely end up being a 2020 model year car, and if so, we would expect to see undisguised photos of both it and the assumed GMC version next year. Related Video: Featured Gallery 2020 Chevrolet Trax spy shots Spy Photos Chevrolet GMC Crossover SUV Future Vehicles chevy trax

Next Corvette ZR1 to get 700 horsepower?

Word has it General Motors may offer as much as 700 horsepower in the C7 Corvette ZR1. Motor Trend reports the next Corvette Z06 will continue to rely on its naturally aspirated 7.0-liter V8 engine for thrust, but the lump will deliver substantially more power. How much more? MT says the engine could deliver up to 600 ponies. That's a jump of 95 horsepower over the current Z06, though no figures have been finalized as of yet. Right now, GM is reportedly waiting to see what sort of grunt it can glean from the next ZR1.
The automaker has already made it clear it will resurrect the LT5 name for the new supercharged V8, and if GM is already pulling 600 from the Z06, the big dog ZR1 would theoretically offer 700 horsepower. Either way, the range-topping Corvette will be suitably insulated from its less potent siblings. Stay tuned. We aren't likely to see the Z06 for at least a year, with the ZR1 trailing along at some point there after.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.