2005 Chevrolet Silverado 1500 Ls Crew Cab Pickup 4-door 5.3l on 2040-cars

Auto blog

Weekly Recap: Autonomous driving goes commercial in Nevada

Nevada granted Daimler Trucks North America the first license to run an autonomous commercial vehicle on public roads in the United States Tuesday, marking another milestone in the technology's rapid advancement. Gov. Brian Sandoval and Daimler truck chief Wolfgang Bernhard promptly used the license to lap Highway 15 near Las Vegas in a newly revealed Freightliner Inspiration Truck. It was a clear signal that autonomous driving is big-rig reality, though it's still a long way from widespread use. Nevada certified two of Daimler's Freightliner Inspiration Trucks, which use the company's Highway Pilot system with a stereo camera, radar, and lane-keeping collision-prevention features to regulate the brakes and steering. The radar component has a long-range sensor that can cover 820 feet at an 18-degree angle and a shorter-range unit that stretches 230 feet at a 130-degree angle. The Inspiration trucks are based on the existing Freightliner Cascadia Evolution model used on US roads. In addition to the autonomous technologies, it also has futuristic design cues, including blue lighting in the front and a new hood and grille. While there are only two Freightliner Inspiration trucks in existence, Daimler expects to bring the Highway Pilot system into mass-produced big rigs by 2025, in time to capitalize on the market's predicted growth. The German truckmaker predicts the global hauling market will triple by 2050, and the United States will be a key part of that growth. Trucks carry 69.1 percent the nation's domestic freight tonnage and hauled 9.7 billion tons of freight in 2013, according to the American Trucking Association. Daimler expects autonomous driving to augment this growth, and perhaps evolve the role of the truck driver. Still, the company points out autonomous tech is not meant to replace drivers, but to assist them and relieve fatigue and monotony on long hauls. The driver has to stay in control for passing, in city traffic, and when hooking up the trailer. The company said autonomous driving also offers the potential for improved fuel economy – tests showed a five-percent gain – and lower maintenance costs. Daimler also said the technology could reduce congestion on the road. Much of this is attributable to the constant flow of traffic, which is aided by autonomous driving. While the benefits are becoming increasingly apparent, autonomous technology is still met with skepticism.

Best and Worst GM Cars

Oh yes, because we just love receiving angry letters from devoted Pontiac Grand Am enthusiasts, we have decided to go there. Based on a heated group Slack conversation, the topic came up about the best and worst GM cars. First of all time, and then those currently on sale, and then just mostly a rambling discussion of Oldsmobiles our parents and grandparents owned (or engineered). Eventually, three of us made the video above. Like it? Maybe we can make more. Many awesome GM cars are definitely going unmentioned here, so please let us know your bests and worsts in the comments below. Mostly, it's important to note that this post largely exists as a vehicle for delivering the above video that dives far deeper into GM's greatest hits and biggest flops, specifically those from the 1980s and 1990s. What you'll find below is a collection of our editors identifying a best current and best-of-all-time choice, plus a worst current and worst-of-all-time choice. Comprehensive it is not, but again, comments. -Senior Editor James Riswick Best Current GM Vehicle Chevrolet Corvette We were flying by the seats of our pants a bit in this first outing and my notes were similarly extemporaneous. When it came time to tie it all together on camera, I failed spectacularly. Thank the maker for text, because this gives me the opportunity to perhaps slightly better explain my convoluted reasoning. I chose the C8 Corvette because it's simply overwhelmingly good, and it's merely the baseline from which this generation of Corvette will be expanded.  While the Cadillac CT5-V Blackwing (more on that in a minute) is an amazing snapshot of GM's current performance standing and its little sibling so enraptured me that I went out and bought one, their existence is fleeting. Corvette will live on; forced-induction Cadillac sport sedans, not so much. So while all three are amazing machines when viewed in a vacuum, the Corvette stands above them as both a reflection of GM's current performance credentials and a signpost of what is to come. So, given the choice between the C8 and the 5V-Blackwing right now, I'd choose the C8. In 10 years, when the Blackwing is no longer in production and Corvette is in its 9th generation? Well, that might be a different story. Now, just pretend I said something even remotely that coherent when we get to the part of the video where I try to make an argument for the 5-V Blackwing as best GM car I've ever driven. Or just laugh at me while I ramble incoherently.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck