Auto blog

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

First 2015 Chevy Corvette Z06 engine blows up at just 891 miles

You've waited and watched and waited some more for the arrival of your 650-horsepower, $78,000 Chevrolet Corvette Z06. Finally, that joyous day arrives and you eagerly, but gingerly, begin to break-in the 6.2-liter supercharged V8 monster under your hood. Then 900-odd miles after delivery, your excitement grinds, quite literally, to a halt. That's what the owner of one 2015 Z06 claimed happened to him when a simple break-in drive resulted in a lunched engine. The owner, known as Lawdogg149 on Corvette Forum, says he was out breaking-in his car ahead of a January track event when it happened. "While making a pull from 35 miles per hour, I accelerated and shifted short of redline, and boom - the car began knocking. I pulled over and popped the hood. I could hear a loud knock coming from the No. 6 cylinder area along with a serious, grinding, metal-on-metal sound coming from the supercharger area," Lawdogg wrote. A subsequent trip to the dealer confirmed his concerns, with the service facility telling Lawdogg that the No. 6 valvetrain had failed. The dealer couldn't research the issue further, though, as General Motors requested the engine be returned for a more thorough evaluation. The good news for the Z06's unlucky owner, at least, is that GM will be covering the engine replacement under warranty, an expense that Corvette Forum estimates is a nearly $24,000 procedure. At this point, the two leading theories behind the engine's detonation involve a manufacturing defect – which could be why GM is so keen to tear the blown powerplant down – or a mistake on the part of Lawdogg. As Motor Authority points out, such an error could be something as simple as the Z06's owner accidentally shifting to first rather than third during his 35-mph pull. If, however, there's a deeper manufacturing problem with the Z06's engine, this might not be the only case we end up hearing about.

eBay Find of the Day: Mario Andretti's personal 2009 Corvette ZR1

With victory in the the Indianapolis 500, a Formula 1 World Championship, a win in the Daytona 500 and too many other motorsports accomplishments to list, Mario Andretti stands among not just the greatest American racing drivers of all time, but the greatest drivers, full stop. Apparently, the champ is also a fan of speed when not on the track, because now there's a chance to own what is said tobe his personal 2009 Chevrolet Corvette ZR1 with just 12,872 miles on the clock. The eBay Motors auction page clearly shows Mario Andretti standing with the car, but the rest of the ad is admittedly short on details. The vehicle history report lists only one previous owner – ostensibly Andretti. The exterior is a handsome Blade Silver Metallic accompanied by a Dark Titanium leather interior. However, the seller keeps additional information to a minimum as well with the description simply stating, "This 2009 Chevy Corvette ZR1 is owned by Mario Andretti and has been garage kept all its life. It is fully loaded with all option on this car." The future buyer will get a seriously great car along with some huge bragging rights at any party by touting its ownership history. We've reached out to the seller for more particulars and provenance, and will update this story if we hear back. In the meantime, the auction for this C6 ends on Thursday, January 8, and currently the reserve isn't met. The price sits at a hefty $68,100 as of this writing, with six bids registered. Featured Gallery 2009 Chevrolet Corvette ZR1 owned by Mario Andretti Auction News Source: eBay MotorsTip: Roger Celebrities Motorsports Chevrolet Auctions Coupe Performance chevy corvette zr1