1987 Chevrolet Silverado 1500 4x4 Lifted on 2040-cars

Auto blog

May 2016: FCA wins, Ford and GM stumble on weak car volumes

The May 2016 sales numbers are in, and it looks as though FCA is getting some vindication for boldly cancelling two slow-selling car models. Meanwhile, Ford saw overall sales dip and GM's May volume took a big dive versus the same month in 2015. While Marchionne's decision to axe the Chrysler 200 and Dodge Dart has drawn criticism as being short-sighted, it's working for FCA so far. Although the Dart and 200 aren't out of production yet and no capacity has been shifted to crossover or trucks, May's numbers show that the emphasis on Jeep and Ram models makes sense right now. FCA's US sales rose 1 percent last month compared to May 2015, putting the year-to-date total at 955,186 vehicles, an increase of 6 percent compared to the same period last year. Standouts included the Jeep Renegade, Compass, and Patriot, and the Fiat 500X. Ram pickup sales were down 3 percent. And your fun fact is that Alfa Romeo sales were up precisely 10 percent, for a total of 44 4Cs sold versus 40 in the same month last year. At FoMoCo, the Ford brand took a hit to the tune of 6.4 percent from May 2015 to 2016, registering 226,190 sales last month. Lincoln showed improvement on its modest numbers, going from 9,174 to 9,807, a 6.9 percent increase. Overall, Ford was down 5.9 percent for the month to 235,997; despite the slump, year-to-date total Ford sales are up 4.2 percent to 1,112,939. Strong sellers included Escape, Expedition, F-Series, and Transit - big stuff. Most small and/or efficient models (Fiesta, Focus, Fusion, C-Max) saw sales slides. Fusion sales were also down, likely due to effects of model changeover to the freshened 2017 model. Ford has promised four new crossovers and SUVs by 2020 and if things keep trending this way the company will be able to sell them, but things could change in the next four years. GM saw the worst of it for domestic brands. Retail and fleet sales were down for each of the four divisions, with the May 2016 total dropping 18 percent to 240,450 vehicles. GM's year-to-date sales are down 5.0 percent in 2016 to 1,183,705. Both the Sierra and Silverado were down significantly, and the majority of Chevy, Buick, GMC, and Cadillac nameplates saw sales decreases, with both small cars and larger utilities included. Not even big stuff could help GM this month, it seems. We'll have more on the rest of the industry's May sales as those figures trickle in.

Recharge Wrap-up: Chevy Volt's new, improved powertrain; Inabikari wants to build Tesla Model X fighter

We knew the 2016 Chevrolet Volt's new powertrain would provide more range, but we didn't know how much. According to GM's Executive Director Larry Nitz, it is about 12 percent more, overall. "I can't think of a powertrain we've re-engineered more extensively within a five-year period than this one," he said. The battery, electric drive system and gasoline generator have all been reworked to allow for an overall driving range of up to 425 miles, with electric range speculated to reach 42 miles or more. The new Volt will also benefit from 20 percent quicker low-end acceleration, weight reductions and improvements in NVH. Read more at Hybrid Cars and at the SAE website. Hyundai's FCEV research and development boss, Dr. Sae-Hoon Kim, is optimistic about the future of hydrogen mobility in Japan. With the Tucson Fuel Cell already in production ahead of Toyota's FCV, Hyundai has a foothold in the hydrogen car scene. Kim believes that since the Fukushima disaster, Japan's attitudes toward energy make it friendly to a growing hydrogen economy. He also says that hydrogen won't be limited to Hyundai, with Kia getting all the battery EVs. "Both types are for both companies," Kim says. "For the moment, volumes are small and it is not wise to have Hyundai and Kia competing." Read more at Just Auto. The Latvian/German startup Inabikari is using crowdfunding to build an electric crossover for Europe. The Rev.01 EV hopes to compete with Tesla's upcoming Model X with a range of over 400 miles and a five-second 0-60 time. The group currently is trying to raise initial funds through an Indiegogo campaign, with hopes of more investment in the future and sales beginning in 2017. See the video below, and read more at Hybrid Cars and at the Inabikari website. Fuel economy and emissions regulations could lead to some interesting design changes to automobiles. The World Light Duty Test Procedure, set to replace the New European Driving Cycle in 2017, will push automakers to find new ways to reduce drag on their vehicles. For better aerodynamics, we could see traditional side-view mirrors replaced by cameras that display what they see on screens inside the vehicle. Another likely change will be the introduction of smaller, narrower wheels. Improving the average drag coefficient from 0.32 to 0.20 could reduce CO2 emissions by as much as 20 percent. Read more at Automotive News Europe.

Chevy to resume engine-building program for 2015 Corvette Z06

One of Chevrolet's most popular and unique customer features is set to return for 2015, as the company has announced that the Engine Build Experience is back. Interested owners will be able to screw together their engines beginning in March. The $5,000 option (which does not include the cost of travel) will give future owners of the 2015 Corvette Z06 the chance to screw together their car's actual 6.2-liter, supercharged V8. Available on each of the Z06's three trims, the Engine Build Experience includes a day at the Performance Build Center, instruction from an engine assembly tech, photographs of the experience and a personalized engine plaque. Once the build process is completed, the engine will (eventually) be fitted under the hood of the customer's personal Z06. "Chevrolet recognizes the passion customers have for Corvette and the Engine Build Experience offers them a truly unique opportunity for hands-on involvement in the creation of the heart of their new car," Corvette product manager Harlan Charles. "It's important for customers to understand their engine won't be installed the day after they built it. It will flow into the scheduling process for vehicle assembly, which depends on a number of logistical variables." Scroll down for the official announcement of the Z06's Engine Build Experience, available below. Exclusive Corvette Engine Build Experience Returns Program renewed for supercharged LT4 engine at new Bowling Green build center 2015-01-07 BOWLING GREEN, Ky. – Chevrolet announced today it is resuming the exclusive Engine Build Experience for Corvette Z06 customers – the only program of its kind for supercar customers. Starting in March 2015, Corvette Z06 customers will be able to assemble the 650-hp supercharged LT4 engine for their cars at the new Performance Build Center inside the Bowling Green Assembly Plant. "Chevrolet recognizes the passion customers have for Corvette and the Engine Build Experience offers them a truly unique opportunity for hands-on involvement in the creation of the heart of their new car," said Harlan Charles, Corvette product manager. "It's a chance to bond with their new car." The Engine Build Experience is selected with order code PBC and is offered on all Z06 trim levels.