13 Chevy Silverado 1500 4x4 Max Package 6.2l V8 Z71 Black Leather Back-up Cam on 2040-cars

Auto blog

2014 Chevrolet Corvette Stingray priced from $51,995*

After months of speculation, Chevrolet has finally revealed the official starting price of the 2014 Corvette Stingray. The base MSRP for the 450-horsepower Stingray Coupe will be $51,995, while the Stingray Convertible will go for $56,995 (*both prices include a $995 destination fee). This means that the price increase from 2013 to 2014 is just $1,400 for the coupe and $2,395 for the convertible - pretty modest increases considering the upgrade in specifications. Of course, neither price accounts for the sort of dealer markup that might grace early C7 window stickers, especially since less than a third of all Chevrolet dealers will be allocated Corvette models to sell at the car's launch.
Now, these prices are for the base car, so if you're wondering how much a fully loaded Stingray will run, Chevy has given us a good indication of that as well. The coupe we saw on display at the Detroit Auto Show (shown above), for example, would run $73,360 including options such as the $2,800 Z51 Performance Package, $2,495 competition sport seats and the $1,795 Magnetic Ride Control option - just to name a few. Stepping up to the 3LT trim level that brings a full leather interior will run an extra $8,005 over the base price.
While $20,000 in options may seem like a lot, this "as-tested" price still has the C7 competitively priced against rival coupes like the Porsche 911 and Nissan GT-R. Speaking of price comparisons, Chevrolet also points out that the C7 Stingray Z51 costs $2,200 less than the C6 Grand Sport while delivering better acceleration (0-60 mph in less than four seconds) and improved track performance (including more than 1 g in cornering).

Common Dodge Ram 1500 vs. Chevrolet Silverado breakdowns

These two trucks are famous for their ability to get the job done. Still, even the toughest vehicle can have mechanical problems at some time. What if we match the Dodge Ram 1500 and Chevrolet Silverado head to head? Let's find out more about common repairs for each model. Also, learn some tricks to pay for car repairs. Clunky Steering Both Dodge and the Chevy owners sometimes notice bumping and clunking when steering. This might be more noticeable when driving over bumps. The cause is usually different in each truck though. In the Dodge Ram, clunky steering is more likely due to a defective lower ball joint. Replacement costs around $300 - $400, parts and labor. Clunky Chevy Silverado steering is probably a steering rack failure. This problem appears more often in trucks with over 90,000 miles. Silverado steering rack repair will run you up to $1,000 or more. Starting Woes For the Chevy Silverado with over 130,000 miles, you might notice trouble starting. This problem may appear occasionally at first, but it typically gets worse. Excluding a weak battery, the culprit is usually the starter. Replacement will cost you around $330 - $500. Of the total cost, $90 is for labor only. Now the Dodge Ram might make a ticking sound when starting, especially on models with over 94,500 miles. The noise often disappears after the engine warms up. These symptoms may indicate a broken exhaust manifold. Repair costs range from $800 - $900. Burning Oil & Gas Gauge On The Blink Sometimes, the Dodge Ram burns oil much faster than normal. In models with over 125,000 miles, this often points towards a leaky intake manifold gasket. A knocking sound may also appear with acceleration along with possible engine misfire. The cost to repair is around $200 - $300. The Chevy Silverado has its own surprises, especially when you've filled the gas tank but the gauge still reads low. Or the needle fluctuates widely from low to full while driving. In trucks with over 120,000 miles, it's likely due to a faulty fuel sensor. You might need a full fuel pump replacement, which can cost you up to $820, parts and labor. Water Inside And Poor Heat The Ram 1500 rear window has been known to leak. You might notice the back seat and floor wet after a rainstorm. This is more common in trucks with over 65,000 miles. Resealing the Ram 1500 rear window costs around $150 - $250.

Meet Alex Archer, the engineer behind GM's power-sliding center console

In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design.  This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video: