Find or Sell Used Cars, Trucks, and SUVs in USA

Show Quality 1956 Chevy Truck Pro Touring Restored Resto Mod on 2040-cars

US $59,500.00
Year:1956 Mileage:500
Location:

Lincoln, Nebraska, United States

Lincoln, Nebraska, United States

This auction is for a rotisserie restored 56 Chevy pickup. Total cost including the truck, all parts and labor was over $150,000. Invoices for all parts and work hours are included to verify the amount spent. No nut or bolt was left untouched. It's a turn key, show quality, truck with clear title. It's been driving approx. 500 miles since the work was done. The truck has received countless awards including Best in Class 1950-1959 and Best Paint at the Midwest Truck Nationals.

Call Steve at 402-525-3979 with any questions. We reserve the right to end the auction at anytime.

Shipping is the responsibility of the buyer.

The following is information about the truck the owner has supplied for the auction.

CHASSIS

Frame- Stock / modified / powder coated

Rear end- / Ratio Ford 9" / 3.70:1 gears

Front Suspension- Heidt's Mustang II independent front suspension / chrome springs and shocks

Rear Suspension- Heidt's four bar with chrome coil overs / panard bar

Power Front and Rear Brakes 11 "disc

Steering- Power rack and pinion

Front Wheel- Make / Size BilIet Specialties Vintage Dish / 15" x 7"

Rear Wheel- Make / Size BilIet Specialties Vintage Dish / 15" x 7"

Front Tire- Make / Size BF Goodrich TA / 215/ 70R-I5

Rear Tire- Make / Size BF Goodrich TA / 255/ 70R-I5

Gas Tank- Stainless Steel / 20 gallon / underbed

Battery Box- Stainless Steel/drop down style / underbed


ENGINE

Make- GM Performance Parts / model ZZ4

Displacement.- 350 c.1. /355 HP

Radiator- Griffin HP aluminum /1 W'tubes

Alternator- Powermaster Motorsports 100 amp

Manifold / Induction- GM dual plane aluminum intake / Holley 670 cfrn street avenger

Ignition- GM HEI

Valve Covers- Billet Specialties ball milled aluminum

Air Cleaner- BiIlet Specialties ball milled aluminum

Headers- .Jet Hot block huggers

Pulleys and Brackets- Zoops billet aluminum

Exhaust / Mufflers- Aluminized 2W' / Flowmaster mufflers

 

TRANSMISSION

Make- GM 700R4 by TCI

Shifter- Column shift with Lokar linkage

 

BODY

Body style- / Material Stepside / all steel! Hushmat noise and thermal insulation

Paint- Corvette torch red / GM code #70

 

INTERIOR

Gauges- Autometer

Wiring- American Autowire / classic update series

Steering wheel- Lecarra / banjo style

Steering column- .Ididit tilt / chrome

Upholstery- Ultraleather / dove grey

Air conditioning- Vintage Air

Interior- (doors, headliner, back panel) RodDoors

Seats- RodDoors

Pedals- Lokar

Carpet- Auto Custom Carpets / cut pile / dove grey

Stereo- Custom Autosound / Kenwood / 100 watt

Speakers- Pioneer / kick panel / 70 watt






Auto Services in Nebraska

Russwood Auto Center ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Automobile Parts & Supplies
Address: 8350 O St., Martell
Phone: (402) 489-7156

Kearney Motors & Classic Muscle ★★★★★

Used Car Dealers, Car Rental
Address: 1840 Highway 30 E, Kearney
Phone: (308) 236-7009

Heartland Auto & Truck Repair ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting
Address: 306 Development St, Crookston
Phone: (402) 376-3407

Anderson Auto Body ★★★★★

Auto Repair & Service, New Car Dealers, Automobile Body Repairing & Painting
Address: Humphrey
Phone: (402) 564-9518

A & B Motors ★★★★★

Used Car Dealers, Wholesale Used Car Dealers
Address: 35399 US Highway 34, Max
Phone: (308) 276-2470

Vern`s Auto Tech ★★★★

Auto Repair & Service
Address: 1402 P St, Broadwater
Phone: (866) 595-6470

Auto blog

GM recalls 200k Hummer H3s for fire risk

Thu, Jul 9 2015

An issue with fires erupting in some Hummers has prompted General Motors and the National Highway Traffic Safety Administration to issue a recall for nearly 200,000 vehicles around the world. The bulk of them are in the United States. According to the first statement (below) obtained by Autoblog from GM, the issue stems from the HVAC system in Hummer H3 models. The connector module for the blower motor has, in certain cases, overheated, melted the surrounding plastic, and started a fire. 42 such cases have been reported, including three instances of occupants citing minor burns. GM confirms that two of those three cases lead to the vehicle being destroyed in the fire, but states that no crashes or fatalities have resulted. The issue affects 196,379 examples of the 2006-10 H3 wagon and the 2009-10 H3T pickup, with 164,993 estimated to be in the United States. In order to fix the issue, dealers are being instructed to replace the relevant parts of the connector and harness. In a second, unrelated campaign, GM is also calling in 50,731 Chevy Spark and Sonic small cars – 45,785 of them in the US – due to a software glitch. In those affected vehicles fitted with the base radio and OnStar system, the audio system may not be able to switch out of turn-by-turn direction mode, causing the display to go blank and all sound to mute – including key safety warnings. In addition, the system may not switch off, draining the battery. GM states that no crashes, injuries, or fatalities have resulted from this issue, and all that dealers will need to do in this case is reflash the software. Related Video: General Motors is recalling 164,993 2006-2010 model year HUMMER H3 and 2009-2010 model year HUMMER H3T models in the U.S. In certain vehicles, the connector module that controls the blower motor speed in the heat/vent/air conditioning (HVAC) system may overheat under extended periods of operation at high- and medium-high speeds. The heat could melt the plastic surrounding the connector module, increasing the risk of a fire. Dealers will replace the affected portion of the connector and harness. GM is aware of three reported minor burns and 42 fires but no crashes or fatalities related to this condition. Including Canada, Mexico and exports, the total recall population is 196,379. ### General Motors is recalling 45,785 2014-2015 model year Chevrolet Sparks, and 2015 model year Chevrolet Sonics in the U.S.

Mysterious white powder discovered at GM Orion Assembly

Fri, Sep 2 2016

Workers at General Motors Orion Assembly Plant in Orion Township, MI uncovered a mysterious white powder in two different parts of the factory earlier this week, raising concerns about worker safety. "We can confirm that an unknown substance (white powder) was found on the floor outside of Gate 6 at Orion Assembly on Monday, August 29. On Tuesday, August 30, we had a second report of a bottle containing a similar substance found inside the plant," GM spokesperson Dayna Hart told The Oakland Press via email. GM stressed that incident didn't disrupt operations at the plant, and that the company was taking steps to ensure the safety of the sprawling factory's workers. That did include, an anonymous worker told The Oakland Press, closing off parts of the factory for two full days, as drug-sniffing dogs and crews in haz-mat suits descended on the area. "A sample of the substance has been sent to a laboratory for identification and results are expected later this week," Hart said. "All findings and actions have been shared with our employees." Orion Assembly currently builds the Chevrolet Sonic and Buick Verano, and will eventually be responsible for production of the new, all-electric Chevy Bolt early next year. Related Video:

GM profit dips on truck changeover, but beats estimates

Thu, Apr 26 2018

DETROIT — General Motors on Thursday reported a higher-than-expected quarterly profit despite a drop in production of high-margin pickup trucks, as it gears up for new models that are expected to boost profits next year. Like rivals Ford and Fiat Chrysler Automobiles, GM is banking on highly-profitable Chevy Silverado and GMC Sierra pickup trucks to lift profits, as consumers shift away from traditional passenger cars in favor of these larger, more comfortable trucks, SUVs and crossovers. During the first quarter, the process of changing over to GM's new pickups resulted in a drop in production of 47,000 units. GM Chief Financial Officer Chuck Stevens said the production drop had resulted in a drop in pre-tax profit of up to $800 million. Earlier this year, GM said its 2018 profits would be flat compared with 2017, but expected its all-new pickup trucks would boost margins starting in 2019. On Thursday, GM reiterated its full-year 2018 forecast for adjusted earnings in a range from $6.30 to $6.60 per share. The automaker said capital expenditures were more than $500 million higher in the quarter because of investments its new pickup trucks and a family of low-cost vehicles under development with Chinese partner SAIC Motor Corp. On Wednesday, rival Ford said it would stop investing in most traditional passenger sedans in North America. CFO Stevens told reporters on Thursday that GM has "already indicated that we will make significantly lower investments on a go-forward basis" in sedans. 2019 GMC Sierra View 21 Photos GM benefited from a lower effective tax rate in the quarter, but adjusted pre-tax margin fell to 7.2 percent from 9.5 percent a year earlier. Stevens said the company's profit margin should hit 10 percent or higher in the second quarter and for the full year. GM said material costs were $700 million higher in the first quarter, and it expects those costs to continue rising. The automaker said it would counter those increases with cost cutting measures. "It is a more difficult environment than it was three or four months ago," Stevens said when asked about rising commodity prices from potential steel and aluminum tariffs announced by the Trump administration. "But we are confident we can continue to offset that." The company reported quarterly net income of $1.05 billion or $1.43 per share, a drop of nearly 60 percent from $2.61 billion or $1.75 per share a year earlier. Analysts had on average expected earnings per share of $1.24.