Classic Step Side Very Desireable For Restoration on 2040-cars

Auto blog

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Recharge Wrap-up: Detroit Electric teaser video, Nissan Leaf is Good Housekeeping "Tried and Tested"

Detroit Electric has a new teaser video and has updated its brand in preparation of the introduction of the SP:01. The refreshed logo uses a blue and white color palette, and the company has also given its website a new look. The teaser video, which gives a sneak peek at the exterior of the SP:01, shows the car taking form in the midst of an electrical storm. Watch the video or learn more in the press release below. Abengoa is celebrating the grand opening of a commercial scale cellulosic ethanol plant in Hugoton, KS. When running at full scale, the refinery will produce up to 25 million gallons of ethanol a year. The plant will also generate enough electricity to power itself and put some back into the grid. Energy Secretary Ernest Moniz was on hand for the dedication, saying, "Every gallon of cellulosic ethanol produced and used to fuel our vehicles reduces the impact of harmful greenhouse gas emissions by greater than 60 percent as compared to conventional gasoline." Learn more at Energy.gov. Good Housekeeping has named the Nissan Leaf one of its "Tried and Tested" vehicles. The magazine called the Leaf SL its top "Roomy Electric" vehicle in its November issue. The magazine's research institute evaluated the EV based on track and road driving, ergonomics and convenience features. Good Housekeeping made note of the car's "impressive" range, but according to Nissan's Fred Diaz, "the real beauty of the Nissan Leaf is that it's roomy and, best of all, fun to drive." Read more in the press release below. Quasar Energy Group produces compressed natural gas from sewage and garbage. It uses things like grains leftover from brewing Budweiser, food waste from a baseball stadium and sewage sludge to produce the gas through anaerobic digestion. The compressed gas can then be used to power cars like Chevrolet's Bi-fuel Impala, which goes on sale later this year. Chevrolet likens the situation to the Delorean time machine in the Back To The Future movie series, which uses garbage to fuel its fusion generator. Watch the video and read the press release below to learn more. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Meet Alex Archer, the engineer behind GM's power-sliding center console

In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design.  This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video: