Find or Sell Used Cars, Trucks, and SUVs in USA

1949 Chevy Pickup on 2040-cars

US $25,000.00
Year:1949 Mileage:1840 Color: Yellow /
 Gray Tweed
Location:

Raleigh, North Carolina, United States

Raleigh, North Carolina, United States
Advertising:
Transmission:Turbo 350
Vehicle Title:Clear
Engine:350
Fuel Type:Gasoline
For Sale By:Private Seller
Year: 1949
Interior Color: Gray Tweed
Make: Chevrolet
Number of Cylinders: 8
Model: Other Pickups
Trim: 2 door
Power Options: Air Conditioning, Power Windows
Drive Type: Turbo 350
Mileage: 1,840
Exterior Color: Yellow
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

You are bidding on a very solid 49 Chevy pickup.  The body sits on it's original frame which was upgraded to a 1974 Buick front clip with disc brakes and drives like a dream.   The drive train is Chevy  350 V8 engine and Turbo 350 Transmission and 9" Ford rear end.    Hooked to the tranny is  a B&M shifter with  with a line lock.  the exhaust is 3" mandrel bent aluminized pipes with Flow Master mufflers.  Fuel cell is installed under the bed.  The motor, transmission and complete drive train is in excellent condition.  The body is painted a bright Corvette yellow paint with special custom graphics.  Interior is custom Gray tweed with Burl wood hydro dipped.  Bucket seats custom console with hidden remote radio.  Dash gauges are white face  Auto Meter. Ignition is Mallery Intake manifold Eldebrock performer, Holly carb, roller rockers and Comp cam.  Keith Black pistons, motor balanced and with Pete Jackson medium noise gear drive timing.  Truck has power steering, power brakes, tilt wheel, power windows and air comditioning.


You will not be disappointed with this truck  For additional information please contact Ronnie at 919-427-3455.

Thanks for viewing the truck and happy bidding.



Auto Services in North Carolina

Winr Auto Repair ★★★★★

Auto Repair & Service
Address: Manson
Phone: (919) 519-2996

Universal Motors ★★★★★

Used Car Dealers, Wholesale Used Car Dealers
Address: 4128 Hickory Blvd, Rutherford-College
Phone: (828) 396-0103

Universal Automotive 4 x 4 & Drive Shaft Shop, Inc. ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automotive Tune Up Service
Address: 2199 Kannapolis Hwy, Concord
Phone: (704) 721-3319

Turner Towing & Recovery ★★★★★

Auto Repair & Service, Towing, Automotive Roadside Service
Address: Wake-Forest
Phone: (919) 219-9096

Triad Sun Control Inc ★★★★★

Auto Repair & Service, Glass Coating & Tinting, Window Tinting
Address: 100 Griffith Plaza Dr, Wallburg
Phone: (336) 765-3622

Tom`s Automotive ★★★★★

Auto Repair & Service, Brake Repair
Address: 141 Randy Ct, New-Hill
Phone: (919) 552-1146

Auto blog

GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch

Mon, 04 Feb 2013

According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.

2013 Chevy COPO Camaro announced with two new engines and manual option

Thu, 07 Mar 2013

Chevrolet is following up the 2012 COPO Camaro with another limited run of the drag-strip-ready production car for 2013. Ditching the superchargers, the 2013 COPO Camaro can only be equipped with one of three naturally aspirated V8 engines, and other new features include the option of a manual transmission, new front springs, some minor styling changes and a lower starting price of $86,000. All cars are designed to abide by the rules of the NHRA's Stock Eliminator or Super Stock classifications, depending on in which series buyers wish to enter their Chevrolet Camaro.
Returning for 2013 is the 427-cubic-inch V8 producing 425 horsepower, but the new engines include a 325-hp 350-CID V8 and a 375-hp 396-CID V8. Buyers can select to purchase all three engines, and each will be matched with the sequence number of that car; the track-only COPO cars will not have vehicle identification numbers and can't be registered for street use.
Chevrolet is also offering unique enthusiast-specific options such as a COPO Build Book and the opportunity for owners to help assemble their car's engine at the Chevrolet Performance Build Center in Wixom, MI.

2021 Chevy Colorado and GMC Canyon facelift spied

Fri, Sep 20 2019

The Chevy Colorado and its GMC Canyon twin have been on sale for a good long time now, and while things move a little more slowly on the truck side when it comes to facelifts and model changeovers, it seems like it’s about time. So itÂ’s no surprise to see some lightly camouflaged trucks running around ahead of what appears to be a minor refresh for the 2021 model year. Starting with the Colorado, it appears to have a bowtie hiding behind some camo in the center of the grille, which otherwise looks like the no-bowtie option you can get on 2019-and-up trucks. It could be that Chevy is keeping the no-bowtie grille design but allowing a bowtie to grace it, or it could be misdirection. Either way, the grille pattern adds a bit of flair to the otherwise staid front end design. There also appears to be a bit more shape to the lower air inlet, with echoes of some of the lower fascias of its bigger Silverado stablemate. The Canyon, on the other hand, shows more extensive front-end changes. At first glance, it looks to emulate some variants of the GMC Sierra, which would make sense given those modelsÂ’ changes for the 2020 model year. In particular, this Canyon has hints of Sierra HD, being more square and monolithic than the regular Sierra 1500s, although itÂ’s a little hard to tell with the camo covering the edges of the grille. It could certainly also adopt more rounded corners like the 1500s. Either way, itÂ’s more vertical and thereÂ’s less differentiation between the upper grille and lower opening. ThereÂ’s nothing in the way of changes around the sides or back, and while there may be some minor changes inside, we arenÂ’t expecting any. The word around town is that this isnÂ’t a full facelift, but rather a minor front end tweak thatÂ’ll just be a regular part of the model-year changeover.Â