1949 Chevrolet Truck 3100 *with Parts Truck* on 2040-cars
Humboldt, Tennessee, United States
These are project trucks but have a very solid potential, as mentioned the bagged frame is dome correctly but no bags are installed. Cab is solid with just rust in cab corners. I have tried to mention everything possible in the condition but if you have any more questions please contact me.
This is a 1949 Chevrolet Truck (Project) it is sitting on a custom bagged frame with a s10 front clip and Camaro rear end. It is back halved with a four link and the front has tubular control arms. It is set up for a V8 although it doesn't have an engine or transmission. Frame is set up for the bags but they are not install (I do not have them). It does however have 2 5 gallon tanks already installed on the frame. The cab is pretty solid it does have the typical cab corner rust but the floor pans are solid, seat is in decent shape as well. The parts truck comes with a stock frame, cab (is rusted through), doors, rear fenders, etc. These trucks will come with a Bill of Sale. I have tried to mention everything, I do not have a issue answering any questions if you want to contact me 731.414.6750. I will be happy to answer anything or send more pictures. A $500 deposit will be due at auction end and they are for local pickup only. ThanksThanks |
Chevrolet Other Pickups for Sale
1986 chevy silverado no reserve
1955 chevrolet big window pickup late model chassis fuel injection 5.7 overdrive
1994 chevy c1500 w/t(US $2,000.00)
1948 chevy **bare metal patina - ratrod - rustomod - hotrod** truck
1956 chevy truck apache hot rod rat rod c10 3100
1957 chevy 3100 shortbed fleetside big window pckup(US $24,500.00)
Auto Services in Tennessee
Votaw`s Tire & Auto Repair ★★★★★
Valvoline Instant Oil Change ★★★★★
Transmission Unlimited ★★★★★
Transmission Masters ★★★★★
The Body Shop at Long of Chattanooga ★★★★★
Sun Matic Control Inc ★★★★★
Auto blog
Junkyard Gem: 2003 Chevrolet Tracker
Wed, May 22 2024When General Motors created the Geo brand to sell vehicles designed and — in some cases — built by Japanese partners, the first four models were introduced for the 1989 model year: the Metro (Suzuki Cultus), Prizm (Toyota Sprinter), Spectrum (Isuzu Gemini) and Tracker (Suzuki Sidekick). Geo got the axe in 1997, with the Metro, Prizm and Tracker becoming Chevrolets. Of those, the Tracker survived the longest, with U.S.-market sales continuing into 2004. Here's an example of a very late Tracker, found in a North Carolina car graveyard recently. The 1989-1997 first-generation Trackers were based on the Suzuki Sidekick, while the 1998-2004 Trackers had the Suzuki Vitaras (not to be confused with the much grander Grand Vitaras) as their siblings. Production of these trucks for the South American market (as the Chevrolet Vitara) continued in Ecuador all the way through 2014. The Tracker name has also gone onto some versions of the Chevrolet Trax around the world. This one is a base four-door hard top/rear-wheel-drive model, which had an MSRP of $17,330. That's about $29,789 in 2024 dollars. You'll find one in every car. You'll see. The engine is a Suzuki 2.0-liter straight-four rated at 127 horsepower and 134 pound-feet. A five-speed manual was base equipment, but very few American vehicle shoppers wanted three pedals by the middle 2000s. This truck has the Aisin four-speed automatic. We like it loud. It appears that someone associated with this truck graduated from Julius L. Chambers High School last year. In the United States, the Tracker was replaced by the Saturn Vue. If Tracker can handle (unspecified Middle Eastern country), it can survive the jungle back home. Siempre contigo.
Why does the Corvette Stingray have so many vents? Here's why
Sun, 27 Jan 2013Just looking at the new 2014 Chevrolet Corvette Stingray, it's not hard to see that the car's design was created with aerodynamics at the forefront, but Chevrolet designers point out exactly what went into designing the iconic coupe in a pair of recently released videos. The videos show the Corvette going through early design phases, including clay models and wind tunnel tests, as well as talking to the car's chief engineer, Tadge Juechter.
Both videos help explain various aspects of the C7 Corvette, but it's the aero tuning of the car that is most interesting. This includes extra attention paid to the lower air dam and vented hood to help reduce drag and lift, while the rear quarter inlets are for differential and transmission cooling. Juechter said that some of these aero-tuned elements were inspired from GM's involvement in racing.
If you have about five minutes and you can't get enough information about the new 'Vette, then check out the videos posted below.
Expect greater differentiation in GM's next-generation SUVs
Thu, 03 Jan 2013General Motors says its next-generation Chevrolet Tahoe, Suburban, GMC Yukon and Cadillac Escalade models will offer shoppers improved interior differentiation. Car and Driver recently caught up with Chris Hilts, GM's creative manager of interior design, who said that the cabins will all feature unique instrument panels, consoles, center stacks and switchgear moving forward. Apparently GM is now aware that consumers may be bothered by the fact that today's $85,000 Escalade has effectively the same cabin as a $45,000 Tahoe. Hilts says SUV buyers want more refinement than their pickup purchasing counterparts - and those same buyers also want their SUVs to have more exterior differentiation between the company's Silverado and Sierra pickup lines. Shocking.
That all sounds good to us, but we've heard this song and dance before. GM made big waves about how different the new-for-2013 Silverado and Sierra would look from each other, but judging by what we've seen so far, GM's stylists are painting in shades rather than with the full spectrum. For more on the what to expect out of GM's new SUVs, click on the C/D link below.