Find or Sell Used Cars, Trucks, and SUVs in USA

1974 Chevrolet Nova Custom Coupe Project on 2040-cars

Year:1974 Mileage:213159
Location:

Spokane, Washington, United States

Spokane, Washington, United States

1974 CHEVY NOVA PROJECT CAR FOR SALE

VERY SOLID CAR, DO NOT HAVE THE TIME TO FINSH DUE TO OUT-OF-STATE JOB TRANSFER, MUST SELL!!!

SBC 350 M-CODE (VIRGIN BLOCK) NUMBERS MATCHING ENGINE

TH350 3 SPEED TRANSMISSION W/STOCK COLUMN SHIFT

GM 10 BOLT POSI REAR W/3:08 GEAR

FENDERS REPLACED WITH PERIOD ORIGINALS THAT ARE RUST FREE, VINYL TOP REMOVED TO MAKE INTO NON-VINYL TOP CAR, THE BROWISH COLOR ON THE ROOF-THIS IS GLUE RESIDUE AND NOT RUST; COMPLETE FRONT END/FIREWALL HAS BEEN FULLY RESTORED AND PAINTED WITH HIGH TEMP EPOXY. READY FOR BODY WORK AND PAINT. THEN, INSTALL DRIVELINE AND DRIVETRAIN AND THIS WOULD BE ONE FINE RIDE - FRONT AND REAR BUMPERS HAVE BEEN REMOVED FOR BUMPER TUCK BUT CAN BE REMOUNTED WITH EASE. FULL INTERIOR IS IN LIKE NEW CONDITION, WITH ONLY THING NEEDED IS A HEADLINER. REAR PACKAGE TRAY INCLUDED ALONG WITH THE FOLLOWING: USED BUT RUST FREE INNER FENDERS & HOOKER HEADERS W/NEW GASKETS AND MSD DISTRIBUTOR. PLUS ALL NEW PARTS AS FOLLOWS: WEIAND SBC INTAKE, HOLLEY 650CFM DOUBLE PUMPER W/VAC SECONDARIES; HOLLEY FUEL PUMP, NEW SUMMIT WATER PUMP, CHROME STEEL TIMING COVER, COMP CAMS TIMING BUTTON, $200 FINNED ALUMINUM VALVE COVERS, W/BREATHER. NEW FINNED ALUMINUM AIR CLEANER, ARP FUEL PUMP PUSH ROD, ARP FASTENERS FOR FLEX PLATE, TORQUE CONVERTER, INTAKE MANIFOLD, ECT. NEW SBC OIL PAN, NEW MELLING OIL PUMP, NEW ONE PIECE BLUE PAN GASKET, ECT. ALSO, NEW RH STEEL QUARTER PANEL AS WELL. THIS IS A GREAT DEAL, EVERYTHING IS HERE TO MAKE AN AWESOME HOT ROD. THE ONLY PARTS THAT ARE NEEDED IS THE TORQUE CONVERTER AND RADIATOR. (AS I WAS PLANNING ON REPLACING WHEN THE BODY WORK WAS COMPLETED). ANY QUESTIONS, PLEASE ASK-AS CAR IS BEING SOLD AS IS WHERE IS, BUT WILL ASSIST IS AUTO TRANSPORT TO OUT OF TOWN BUYER.

**WILLING TO RE-INSTALL BUMPERS, HOOD, GRILL AND RE-INSTALL ORIGINAL ENGINE/TRANS/DRIVELINE FOR SHIPPING PURPOSES IF SOLD OUT OF THE AREA** ALSO ACCEPTING OFFERS FOR CAR, WITHOUT ENGINE/TRANS.

 

ANY QUESTIONS PLEASE ASK.

THANK YOU.

Auto Services in Washington

Wind Tech Auto Glass ★★★★★

Auto Repair & Service, Glass-Auto, Plate, Window, Etc, Windshield Repair
Address: Longmire
Phone: (206) 546-2971

Wind Tech Auto Glass ★★★★★

Auto Repair & Service, Glass-Auto, Plate, Window, Etc, Windshield Repair
Address: Snoqualmie-Ps
Phone: (206) 546-2971

West Hills Chrysler Jeep Dodge ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 900 W Hills Blvd, Seabeck
Phone: (360) 377-4418

Volkswagen Audi Auto Repair ★★★★★

Auto Repair & Service
Address: 13551 SE 27th Pl # 112, Preston
Phone: (425) 453-6167

Village Transmission & Auto Clinic ★★★★★

Auto Repair & Service, Auto Transmission, Automobile Consultants
Address: 23901 84th Ave W, Woodway
Phone: (425) 908-0132

Villa Transmissions & Auto Repair ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Transmission
Address: 9810 59th Ave SW, University-Place
Phone: (253) 584-1668

Auto blog

Dodge Challenger SRT Hellcat vs. Chevrolet Camaro ZL1 in latest Head 2 Head

Fri, Jan 30 2015

"Olympian" is one of the terms we use to signify the greatest height, the seat of the gods. Yet Mt. Olympus is the second-highest peak in the Balkans ranges, overshadowed by the crest at Musala in Bulgaria's Rila mountains. Both great heights, but one is a little higher. That's how we get the Olympian Chevy Camaro ZL1 pitched at the Musalic Dodge Challenger SRT Hellcat in Motor Trend's latest episode of Head 2 Head. The side-by-side spec sheet is filled with farcical numbers. For the ZL1, that's a 6.2-liter V8 with 580 horsepower, 556 pound-feet of torque, a 4,051-pound curb weight, 0-to-60 miles per hour in 3.9 seconds, a quarter-mile time of 12.2 seconds and a base price of just $57,800. Opposing that, the Hellcat wrings out its 6.2-liter V8 for 707 hp, 650 lb-ft of torque, weighs 4,449 pounds, does the quarter in 11.7 seconds and has a base price of just $60,990. Except in the case of the Hellcat, when Motor Trend put it on the dyno the machine spit out a reading of 672 hp and 606 lb-ft at the wheels. If there's a 10-percent driveline loss through those beefed-up internals and heavy-duty eight-speed transmission, that means the Hellcat is actually rated at about 750 horsepower and 700 lb-ft. But once they get put on a closed-off strip of coast road in Northern California, there are only a few strands of hair between their respective performances. That's not the case for they sensations provide; host Jonny Lieberman calls one of them, "One of the most incredible cars ever made," and says, "It changes everything." Watch the video above to see who got the verdict and how. Related Video:

Cadillac could base its entry-level sedan on the Chevy Cruze [UPDATE]

Wed, Apr 27 2016

UPDATE: Cadillac spokesperson Donny Nordlicht tells Autoblog , "The post speculating on a future Cadillac model derived from the Chevrolet Cruze is completely false." Premium automakers Mercedes-Benz and Audi have seen plenty of success with new small front-drive-based sedans. The CLA-Class had its best January ever this year, while Audi moved more of its new A3 in 2015 than its predecessor sold in 2005 through 2010 combined. The fact that Cadillac wants a piece of that pie is no surprise, then. There's a new rumor that GM's luxury brand could launch its own compact – possibly called CT2 – to battle the Germans. Cadillac, a brand that's pushed hard to rebuild its rear-drive reputation, could develop a new entry-level model based on the front-wheel-drive 2016 Chevrolet Cruze's D2XX platform. Go ahead and make your Cimarron jokes. Sources are telling GM Inside News that a Cadillac built on the Delta platform would ditch the Cruze's turbocharged 1.4-liter four-cylinder for a 1.5-liter turbo in base models. General Motors' well received 2.0-liter turbo four would serve in higher-end models. According to GMIN, the Delta-based Cadillac would likely command a $6,000 to $9,000 premium over the Cruze, so figure $23,000 to $26,000 on the low end to $30,000 to $33,000 for something at the top of the range. As much as we dislike the kind of badge engineering that brought us the Cavalier-based Cadillac Cimarron in the '80s, the company has done an admirable job of distinguishing vehicles on shared platforms lately. A Delta-platform Cadillac would at least have a good basis – the new Cruze is surprisingly comfy. That said, we question GM's rationale if this rumor is indeed true. Put simply, Cadillac needs another sedan like I need another student loan payment. The company has four sedans, three of which overlap two segments, and none of which are selling very well. That's not because they're bad, but because customers want crossovers, of which Caddy has but one – the new XT5. Spending the time and money to add a fifth sedan to the mix when the company desperately needs to flesh out its CUV range would be a tremendous mistake. As much as we hate to say it, if Cadillac really wants to add a small, entry-level car to its range, it'd better be a crossover. Related Video:

Next-gen Chevy Cruze caught cruising in the cold

Wed, 13 Feb 2013

Spy photographers have caught what looks like the next-generation Chevrolet Cruze out on snow patrol. The camo could be tricking our eyes, but it look like it has an even tidier, more rounded front end and even lower fenders in relation to the top of the hood. And either a chunk of camo has been wedged between the side mirrors and the doors, or the mirrors are up for revision, too.
The door handles have been moved up the side of the car, leading the way to a rear end that grows a bit in length. If the rumors are true, the coming second-generation Cruze sits on the new D2XX platform that will replace the Delta and Theta platforms at General Motors. A global architecture, the Cruze will be the first to get it, but it will underpin everything from next Chevrolet Volt to the Equinox and could be responsible for 2.5 million units by 2018. The next Cruze is expected to begin production in GM's Lordstown, Ohio plant in the third quarter of 2014.