1977 Monte Carlo- Rare Posi-track !! on 2040-cars

Auto blog

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado

Corvette Stingray Shooting Brake under consideration by Callaway [w/poll]

Callaway has released a few renderings of a design study for a shooting brake version of the C7 Chevrolet Corvette Stingray. The company says it wants to create a long-roof version of America's sports car to offer buyers more interior room and a vehicle with "unique style." The company says it will use structural carbon fiber for the new body bits, which suggests the conversion shouldn't add too much more weight to the Corvette. Along with a few mechanical tweaks, the Callaway Corvette Stingray AeroWagon could breeze past the 200 miles per hour barrier.
Provided that they get enough interest, Callaway estimates they will be able to effect the changes on the Chevrolet for around $15,000, and says the conversion work should be available through its network of dealers. You can check out the brief press release below for more information, or head over to the Callaway site to plunk down a deposit - but before you do, we want to know... do you find this C7 wagon interesting? Vote in our poll below, then feel free to leave a few lines in Comments.
View Poll

GM is quietly slashing prices on base models

While General Motors' fourth quarter financial figures haven't yet been released, the automaker seems to be weathering a potentially rocky time well, even beating third-quarter projections last year. To keep the climb going, the company is launching new base trims for several popular models that make them cheaper than ever but with tight dealer margins. The new entry-level trims are the Chevrolet Cruze L, Equinox L, GMC Terrain SL and Buick LaCrosse 1SV. Buyers lose some content by picking them, but the prices are slashed. According to Cars Direct, the biggest savings are on the LaCrosse, where customers pay $31,065, plus $925 destination, $2,570 less than the previous base 1SB trim but must accept things like 17-inch wheels and no cargo net in the back. If you're wondering how Buick can remove only a little equipment but cut the price so much, it's because the company also slashed dealer margins. According to Cars Direct, the difference between the invoice and MSRP for the LaCrosse 1SV is only around $150, compared to around $1,350 before. The disparity is even greater for the Cruze with an $81 difference in the prices, compared to about $600 for the LS version. Showrooms are expected to keep very low stocks of these trims, though. "Dealers use such vehicles to get people in the door, but they do not generally want to do high volumes of these strippers. The margins are next to nothing; they don't make much money off these cars," said Ed Kim, Vice President of Industry Analysis for AutoPacific to Autoblog. Dealers are also expected to advertise that these new base trims undercut major competitors. For example, the Cruze L rings up for about $2,320 less than a Honda Civic LX, according to Cars Direct. One potential drawback for buyers is that these models might not be eligible for incentives. While the attractive prices might get customers into dealers, folks may not actually end up driving home with these entry-level models. Kim indicated base trims also make up a small portion of the sales mix. "Consumers aren't asking for stripped out vehicles, even at the low end of the marketplace," he said. Featured Gallery 2015 Chevrolet Cruze View 9 Photos News Source: Cars DirectImage Credit: Chevrolet Buick Chevrolet GM GMC Car Buying Car Dealers Crossover Sedan gmc terrain cheap cars