1974 Chevrolet Monte Carlo Base Hardtop 2-door 5.7l, Blue/white, Original Owner on 2040-cars

Auto blog

Chevy Bolt-based prototype may be a Buick EV for China

Late last spring, we got a look at a GM prototype that was clearly based on the Chevy Bolt EV, but with updated styling. It seemed like it could be a more crossover-styled Bolt, given the recently trademarked name of EUV. Now we get another look at the prototype, but the bodywork seems less suggestive of a Chevy, and more of a Buick. This vehicle definitely still appears to be based on the Bolt, rather than on another small GM platform. In the photos of it next to the current model, the size, wheelbase and profile are extremely similar. There are differences, though. The nose isn't as sloped or as rounded, and the rear window kicks up a little earlier. The biggest changes are in the front and rear fascias, and it's here that we see hints of Buick. There are prominent air inlets on each side of the front bumper that give the car a more aggressive look. The headlights still have a fairly rounded, organic look, but with little extensions like fangs underneath. The styled running-light section, rounded shape and the smoked lenses seem very Buick-like. The grille features a large badge that doesn't fit the shape of a bow-tie, and is more that of a round logo like Buick's. Around at the back, the full-width taillights stand out, and in the middle there is obviously a round badge, again like a Buick. The wide taillights would also be a natural evolution of Buick's current light design language that uses somewhat wide and thin lights. The rear bumper has been redesigned with new lower taillights. Now that we've established that this seems very much like a Buick, we don't think we'll see this particular version offered here with the badge. This is more likely a Buick version of the Bolt for the Chinese market, where the brand is associated with luxury and has been the spearhead for GM's electric and hybrid models. In fact, the Chevy Volt hybrid was sold there as the Buick Velite 5, which was part of a family of a electrified Velite models. This would probably also carry a Velite badge as well. While we might not see this specific Buick variant, we probably will see it offered as a Chevy in some form. With its more aggressive, crossover shape, it could be the rumored EUV model. Or it could be just a refresh of the current Bolt, since the model has been largely unchanged since its introduction for the 2017 model year. And extrapolating from this prototype, we can see how the headlights could be tweaked to tie into those air scoops as on the Suburban and Silverado.

2016 Chevy Colorado Duramax gets 31 mpg highway

The 2016 Chevrolet Colorado Duramax and its similarly diesel-powered GMC Canyon sibling are the most fuel-efficient new trucks on the market in America. The Environmental Protection Agency estimates 31 miles per gallon highway, 22 mpg city, and 25 mpg combined for two-wheel-drive Colorado and Canyon diesels. That's just good enough to take the pickup fuel-economy title from the Ram 1500 EcoDiesel HFE, which carries EPA estimates of 29 mpg highway, 21 mpg city, and 24 mpg combined. Four-wheel-drive models offer slightly lower economy figures of 29/20/23, respectively. Drivers can cover quite some distance, too – the GM twins' 21-gallon tanks mean a maximum range of 651 miles. <p>Your browser does not support iframes.</p> Diesel's reputation may be somewhat tarnished in the US after Volkswagen's emissions scandal, but Chevy wants to assure potential customers that there are no tricks with the Colorado's figures. The pickup's engine features NOx-reducing tech like exhaust gas recirculation, and the EPA and California Air Resources Board recently chose the truck to take the additional step of real-world emissions tests. The 2.8-liter Duramax four-cylinder with 181 horsepower and 369 pound-feet of torque had no problems with the more stringent evaluation, and "the agency expressed no issues or concerns," according to the company's statement. The diesel Colorado goes on sale this fall, and the Duramax costs $3,730 over a similarly equipped V6 model. We've gone ahead and included dueling press releases from both Chevy and GMC below for your reading pleasure. Related Video: CHEVROLET COLORADO DIESEL: AMERICA'S MOST FUEL EFFICIENT PICKUP 2015-11-09 2016 Colorado two-wheel drive model offers EPA-estimated 31 mpg highway Up to 7,700 pounds of trailering when properly equipped DETROIT – Chevrolet today confirmed that the 2016 Colorado two-wheel drive with the Duramax turbo-diesel will be the most fuel efficient pickup in America, offering an Environmental Protection Agency-estimated 31 mpg highway fuel economy. The EPA-estimated highway fuel economy for 2016 Colorado four-wheel drive diesel is 29 mpg. The EPA has issued a Certificate of Conformity for the Chevrolet Colorado Duramax diesel. The agency expressed no issues or concerns following its recent extensive testing and evaluation of the emission control system on the Colorado Duramax diesel.

Chevy to resume engine-building program for 2015 Corvette Z06

One of Chevrolet's most popular and unique customer features is set to return for 2015, as the company has announced that the Engine Build Experience is back. Interested owners will be able to screw together their engines beginning in March. The $5,000 option (which does not include the cost of travel) will give future owners of the 2015 Corvette Z06 the chance to screw together their car's actual 6.2-liter, supercharged V8. Available on each of the Z06's three trims, the Engine Build Experience includes a day at the Performance Build Center, instruction from an engine assembly tech, photographs of the experience and a personalized engine plaque. Once the build process is completed, the engine will (eventually) be fitted under the hood of the customer's personal Z06. "Chevrolet recognizes the passion customers have for Corvette and the Engine Build Experience offers them a truly unique opportunity for hands-on involvement in the creation of the heart of their new car," Corvette product manager Harlan Charles. "It's important for customers to understand their engine won't be installed the day after they built it. It will flow into the scheduling process for vehicle assembly, which depends on a number of logistical variables." Scroll down for the official announcement of the Z06's Engine Build Experience, available below. Exclusive Corvette Engine Build Experience Returns Program renewed for supercharged LT4 engine at new Bowling Green build center 2015-01-07 BOWLING GREEN, Ky. – Chevrolet announced today it is resuming the exclusive Engine Build Experience for Corvette Z06 customers – the only program of its kind for supercar customers. Starting in March 2015, Corvette Z06 customers will be able to assemble the 650-hp supercharged LT4 engine for their cars at the new Performance Build Center inside the Bowling Green Assembly Plant. "Chevrolet recognizes the passion customers have for Corvette and the Engine Build Experience offers them a truly unique opportunity for hands-on involvement in the creation of the heart of their new car," said Harlan Charles, Corvette product manager. "It's a chance to bond with their new car." The Engine Build Experience is selected with order code PBC and is offered on all Z06 trim levels.