1979 Malibu 9 Second Street Car Shafiroff 472 Bbc on 2040-cars
Gainesville, Florida, United States
This car belonged to a very good friend of mine for 20 years, I purchased the car from him after a few years of begging, lol. In all seriousness, the car meant the world to him, it never spent the night outside, it was painted in 2000, it still looks very good, the car is solid and straight. He switched to BBC combo that you see today, he spent over 16k on the power plant, its a Scott Shafiroff 472 12.5 compression I believe, it has an Eagle crank, rods, and Je pistons. The heads are Big Brodix which he sent to AFR to have worked. The transmission is a TH400 with and ATI reverse manual valve body and an ATI 5500 stall. The rear end is a 12 bolt with 32 spline strange axles and a spool. It has to much to list, the car ran 10.30 @ 136 in the summer here in Florida , it was about 90 out, and my buddy is a big guy, he's about 400 ish. So I feel confident it has some high 9's in it as it is, or you can spray it, the motor is bullet proof. It has the potential to go high 8's with the right kit.
The car sounds wicked, its got a 690 ish solid roller Chet Herbert cam, Hooker super comp headers and 3 inch exhaust. look over the pics, and call with any questions, thanks for looking. also, I will separate the engine and trans if interested , I value the combo at 8500 352 494 6913 |
Chevrolet Malibu for Sale
- Clean carfax one owner local trade low miles bluetooth onstar 16" alloy wheels
- 1982 malibu wagon
- 1966 chevrolet malibu ss convertible canadian 396/360 4-speed~gm of canada docs(US $79,900.00)
- 2013 chevrolet malibu ls power windows alloy wheels rebuilt reconstructed(US $13,900.00)
- 1968 chevelle no motor no trans
- 2013 ltz used 2.5l i4 16v automatic fwd sedan onstar 26k miles(US $19,999.00)
Auto Services in Florida
Y & F Auto Repair Specialists ★★★★★
X-quisite Auto Refinishing ★★★★★
Wilt Engine Services ★★★★★
White Ford Company Inc ★★★★★
Wheels R US ★★★★★
Volkswagen Service By Full Throttle ★★★★★
Auto blog
Next Chevy Silverado could get this built-in tailgate step
Thu, Feb 2 2017General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video:
More Corvette Stingray Factoids: Vanishing panel gaps and 26-mpg LT1
Thu, 28 Feb 2013During January's Detroit Auto Show, we managed a longer than expected wandering tag-team interview with C7 Corvette chief engineering exec Tadge Juechter (pictured above), and LT1 engine boss Jordan Lee (pictured below). They are, quite honestly, two of the very nicest bigshot lads to ever walk the engineering corridors of an American manufacturer. Both are enthralled by what they're doing for a day job. So are we.
We've followed the pre-sale anticipation for the Chevrolet C7 Corvette Stingray like an Oreck vacuum yanking every speck of dirt from a well-trampled carpet. Everything is reportable and contains a grain of further knowledge about this dramatically important and cheered-for car, as it continues to be pressured into representing all that is superior about the American dream. The Corvette wears one heavy cloak.
So, most of what was talked about has been expertly reported already right here on Autoblog. But, looking through our notes again, both Jeuchter and Lee added facts to the buzzing mix.
General Motors CEO Provides Few Details In Appearance Before Congress
Wed, Apr 2 2014It was only two months ago that Mary Barra, freshly crowned as the new General Motors chief executive officer, visited Washington DC as an esteemed guest of First Lady Michelle Obama for the State of the Union address. On Tuesday, Barra returned to the Capitol under more strained circumstances. For more than two contentious hours, she took questions from members of a House of Representatives subcommittee investigating General Motors years-long delay in initiating a recall of millions of vehicles that contained a defect that has killed at least 13 people. Why did GM accept faulty ignition switches that were below the company's set specfications? Why did GM learn about the problem in 2001 yet take no action until 2014? Will GM compensate victims' families even though the company's bankruptcy may limit its liability? Those were a few of the questions members of the House Oversight and Investigations Subcommittee asked. Few concrete answers were forthcoming. For her part, Barra sidestepped most of the questions, saying she wouldn't have information needed to answer them until an internal review is completed. David Friedman, the administrator of the National Highway Traffic Safety Administration, testified after Barra. The biggest news that emerged from the hearing was that General Motors has retained attorney Kenneth Feinberg to advise the company on its civil and legal responsibilities. He has made a career of resolving disputes and serving in a 'fixer' role, serving as the chief of the federal government's September 11th Victim Compensation Fund, as an administrator of compensation fund for victims of the BP Deepwater Horizon disaster and a similar fund for victims of the Boston Marathon bombing. Barra, who has been GM's CEO since January but been with the company since 1980, expects to meet with Feinberg on Friday, and have a concrete plan within the next 30-60 days. Yet Barra would not say for certain Tuesday that GM would compensate the victims at all. Despite repeated questions from Rep. Diana DeGette (D-Colo.), Barra did not outline the company's intentions. "I assume GM is hiring (Feinberg) to help identify the size of claims and then compensate the victims? Is that right," DeGette asked. "Is GM willing to put together some kind of a compensation fund for these victims that Mr. Feinberg will then administer?" "We've hired him to help assess the situation," Barra replied. "So really, there's no money involved at this point," DeGette asked.