2014 Chevrolet Impala 2lz on 2040-cars

Auto blog

Leak reveals GM's 2017 heavy duty diesel trucks to get 910 lb-ft of torque [UPDATE]

UPDATE: Chevrolet officially announced specs for the 2017 Silverado HD and the rumors were true. The truck's new Duramax 6.6-liter turbo-diesel V8 puts out 445 horsepower and 910 pound-feet of torque. Chevrolet says the new motor produces 19 percent more torque and 12 percent more horsepower, while producing 35 percent fewer emissions. Overall, the new engine is a big improvement over the current motor, which generates 397 horsepower and 765 pound-feet of torque. According to Truck Trend, GM's newest heavy duty pickup trucks will pick up quite a bit more power and torque. The publication spotted a recent GM Powertrain ordering catalog that had the engine specs for the 2017 model year and managed to get some screenshots before the catalog was taken down, and they can be viewed here. The screenshots revealed that the 6.6-liter turbodiesel V8 powering the Silverado and Sierra heavy duty models will boast 445 horsepower and 910 lb-ft of torque. This is a substantial gain over the current models' 397 horsepower and 765 lb-ft of torque, and as Truck Trend points out, it exceeds the Ford Super Duty line's horsepower output of 440, but comes short of the 925 lb-ft rating. Truck Trend credits part of this output gain to the new intake system GM will introduce on the 2017 heavy duties. The intake gets 60 percent of its air from a scoop on the hood, with the other 40 percent coming from behind one of the front fenders. GM doesn't reveal horsepower figures in the press release about the scoop, but it does say the cooler air helps with maintaining the engine's output, and that the scoop does produce a ram-air affect, providing more air at speed. As we know, more air plus more fuel equals more power, but there's likely more to the power increase in this engine than only the intake. Related Video: News Source: Truck Trend via MSN Chevrolet GM GMC Truck Diesel Vehicles

Recharge Wrap-up: BMW cars to share i tech, Jordan to build solar EV charging network

Jordan is looking to promote EVs and build a solar charging network. The country is waiving import tariffs on electric cars, and is spending $120 million on solar chargers. It plans to build 3,000 charging stations, along with 30 MW of solar power. Some chargers will be powered by solar canopies, while others will get electricity from nearby solar farms. Jordan's solar plan should also help to lessen the amount of energy it needs to import from nearby countries. Read more from Navigant Research, or at Green Car Reports. BMW's mainstream cars will benefit from technology borrowed from the i3 and i8, according to BMW sales head Ian Robertson. In an interview with Automotive News, Robertson said that next-generation cars will use carbon fiber more extensively, and that more cars will get plug-in technology. He said that about half of i3 buyers opt for the range extender and added that it is incorrect to refer to a range-extended electric vehicle as a plug-in hybrid. Read more at Automotive News. The ethanol market should remain healthy despite falling oil prices. While cheap oil could drive down ethanol prices, demand still remains due to the federal biofuels standard. Additionally, ethanol producers may find it cheaper to ship their products as domestic oil production drops and railroad shipping opens up. Ethanol byproducts like distillers grains continue to sell, and foreign demand continues as other countries impose their own renewable fuel standards. Read more at Yahoo News. Via Motors will launch the production of an electric Chevrolet Silverado. The company will convert the pickups into range-extended EVs at its assembly line in Mexico, near GM's Silverado plant. Via has the capacity to produce 10,000 vehicles per year at its Mexico facility. Via Motors Chairman (and former GM Vice Chairman during the early days of the Chevrolet Volt project) Bob Lutz wants to help make EVs mainstream in America, and believes that requires electrifying pickups and SUVs. Read more in the press release below. Bob Lutz to Announce Production Launch of the Electrified Chevy Silverado BY VIA Motors Media access to Bob Lutz, former Vice-Chairman of General Motors and father of the Chevy Volt Bob Lutz is now Chairman of VIA Motors who builds the "Volt Style" extended range electric drive system for the Silverado, the Express Van and is working on the SUV's (Tahoe, Suburban) 5 years in development. Now production Launch and Consumer Sales in 2015.

GM recalls Colorado, Canyon, and Malibu for airbag problem

The Basics: General Motors will recall and issue a stop sale on 1,740 total examples of the 2016 Chevrolet Colorado, Malibu, and GMC Canyon. This includes 1,579 units in the US and 161 in Canada. The Problem: The second stage of the driver front airbag inflator might not be present. If this happens, the airbag won't fill as quickly as it should in a high-speed crash, which could increase the risk of injury, according to Reuters. This is not related in any way to Takata's inflator problems, and these parts come from a different supplier. Injuries/Deaths: None reported. The Fix: GM will replace the vehicles' airbag assemblies. If You Own One: GM spokesperson Tom Wilkinson told Autoblog he wasn't specifically sure when recall repairs would begin but said it would be "shortly." He expects the fixes to happen "quickly" because of the small number of affected vehicles, and many of them are either in transport or already in dealer stock. More Information: GM recalled the 2015 Canyon and Colorado in 2014 for a completely separate airbag issue. In that case, a manufacturing error improperly wired the connectors. Related Video: GM Statement GM is recalling 1,579 MY 2016 Chevrolet Colorado, GMC Canyon and Chevrolet Malibu vehicles in the United States and 161 in Canada to replace driver-side front airbags. The second stage of the airbag may not deploy properly in certain high-speed crashes. During a routine quality inspection, it was determined that a component required for a second-stage/high-output deployment was not loaded during the inflator build. Dealers will replace the driver-side front airbag assembly. There have been no reports of crashes or injuries related to this issue. This issue is unrelated to the ongoing Takata recalls.