1964 Chevrolet Impala Convertible on 2040-cars

Auto blog

Experimental mid-engine XP-819 Corvette going up for auction

It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.

Cadillac could base its entry-level sedan on the Chevy Cruze [UPDATE]

UPDATE: Cadillac spokesperson Donny Nordlicht tells Autoblog , "The post speculating on a future Cadillac model derived from the Chevrolet Cruze is completely false." Premium automakers Mercedes-Benz and Audi have seen plenty of success with new small front-drive-based sedans. The CLA-Class had its best January ever this year, while Audi moved more of its new A3 in 2015 than its predecessor sold in 2005 through 2010 combined. The fact that Cadillac wants a piece of that pie is no surprise, then. There's a new rumor that GM's luxury brand could launch its own compact – possibly called CT2 – to battle the Germans. Cadillac, a brand that's pushed hard to rebuild its rear-drive reputation, could develop a new entry-level model based on the front-wheel-drive 2016 Chevrolet Cruze's D2XX platform. Go ahead and make your Cimarron jokes. Sources are telling GM Inside News that a Cadillac built on the Delta platform would ditch the Cruze's turbocharged 1.4-liter four-cylinder for a 1.5-liter turbo in base models. General Motors' well received 2.0-liter turbo four would serve in higher-end models. According to GMIN, the Delta-based Cadillac would likely command a $6,000 to $9,000 premium over the Cruze, so figure $23,000 to $26,000 on the low end to $30,000 to $33,000 for something at the top of the range. As much as we dislike the kind of badge engineering that brought us the Cavalier-based Cadillac Cimarron in the '80s, the company has done an admirable job of distinguishing vehicles on shared platforms lately. A Delta-platform Cadillac would at least have a good basis – the new Cruze is surprisingly comfy. That said, we question GM's rationale if this rumor is indeed true. Put simply, Cadillac needs another sedan like I need another student loan payment. The company has four sedans, three of which overlap two segments, and none of which are selling very well. That's not because they're bad, but because customers want crossovers, of which Caddy has but one – the new XT5. Spending the time and money to add a fifth sedan to the mix when the company desperately needs to flesh out its CUV range would be a tremendous mistake. As much as we hate to say it, if Cadillac really wants to add a small, entry-level car to its range, it'd better be a crossover. Related Video:

GM recalling over 243,000 crossovers over possible seat belt defect

2010 Buick Enclave - Click above for high-res image gallery
The summer of 2010's recall hit parade continues unabated today, with General Motors having just announced that it is asking 243,403 owners of its 2009-2010 Lambda crossovers to bring their three-row haulers in for inspection. The culprit? Second-row seat belts in select Buick Enclave, Chevrolet Traverse, GMC Acadia, and Saturn Outlook CUVs have "failed to perform properly in a crash."
According to GM, a second-row seat-side trim piece is to blame, as it can impede the upward rotation of the buckle after the seat is folded flat. As a result, if the buckle makes contact with the seat frame, cosmetic damage can occur, potentially requiring additional force to operate the buckle properly. So far, no great shakes, but in the process of applying that additional force, the occupant may push the buckle cover down to the strap, potentially revealing and depressing the red release button. As a result of this, the belt may not latch, or in certain cases, it may actually appear to be latched when, in fact, it isn't.