1962 Chevy Impala on 2040-cars

Auto blog

GM trucks get hybrid versions, but you'll probably never see one

A few years ago, General Motors sold hybrid versions of its Chevy Silverado and GMC Sierra pickups. They weren't very good, using GM's old two-mode hybrid system that resulted in only negligible fuel economy gains. But GM's trying again, launching eAssist models of the 2016 Silverado and Sierra that are said to offer 2-mpg improvements in city, highway, and combined fuel economy ratings. Problem is, you probably won't be able to get one. Only 700 eAssist trucks will be made for the 2016 model year – 500 Silverados and 200 Sierras. When you consider that GM moved 824,683 examples of its light-duty pickups in 2015, this small run represents 0.08-percent of all Silverado/Sierra production, and GM says it "will monitor the market closely ... and adjust as appropriate moving forward." But that's not the only limitation. The eAssist trucks will only be sold through California dealers. For the Silverado, eAssist can only be optioned on the 1500 Crew Cab 1LT 2WD model, and for the Sierra, the fuel-saving technology is solely available on the 1500 SLT Crew Cab 2WD model with the SLT Premium Plus package. Granted, in terms of the Sierra, that means you get niceties like LED headlights and taillights, Apple CarPlay and Android Auto, Bose premium audio, heated seats and steering wheel, lane keep assist, and more. In the trucks, eAssist combines a small electric motor and 0.45-kWh battery pack with the pickups' 5.3-liter V8. GM estimates total output of 355 horsepower and 383 pound-feet of torque – no more horsepower than the non-eAssist trucks, but three more pound-feet of torque. GM says the eAssist trucks can tow up to 9,400 pounds, and the battery only adds 100 pounds to the trucks' weight. The electric motor provides 13 hp and 44 lb-ft of torque for a boost of acceleration off the line, or during passing. It also allows the engine to run in four-cylinder mode for longer periods of time. eAssist uses regenerative braking to help power onboard electrical systems, and adds start/stop to the powertrain. Finally, the so-equipped trucks have a six-percent improvement in aerodynamics, thanks to a soft tonneau cover and active grille shutters in the front fascia. Great news is, the eAssist option is relatively inexpensive, only costing $500. But good luck getting your hands on one.

Weekly Recap: Electric Rapide concept showcases Aston's future

Aston Martin showed off an all-electric Rapide S prototype this week and announced an agreement with investment firm ChinaEquity to explore development of a production version of the sports sedan. The car could arrive in about two years if the project advances, and it would be built in Gaydon, England. The concept car, called the "RapidE" was developed with Williams Advanced Engineering. The electric Rapide is meant to highlight British innovation, and it was revealed during a state visit by Chinese president Xi Jinping to the United Kingdom. Spec were not available for the concept on display. "The car we showed in London is a fully running concept but not yet defining [of] our choice of battery, motor, inverter, etc," spokesman Simon Sproule said. "Now that we have a clearer path for producing the car, we will be defining all the parameters." Aston Martin has been vocal about its electric ambitions this year, and Sproule told us at the New York Auto Show that an all-electric Rapide could cost $200,000 to $250,000 or more. "It's a study, but we're serious about it," he said. Some reports have indicated the electric Rapide could pack as much as 1,000 horsepower. Aston considers electric technology the strongest play for modernizing its powertrains and meeting emissions standards around the world. Hybrids and all-electric models can offer high outputs and strong torque delivery, which is in keeping with the Aston's image as a sportscar maker. Company brass prefer this option over dropping down to four-cylinder engines. And yes, V8s and V12s remain part of the plan. The electric push is part of Aston's future strategy to remake its lineup, which includes refreshing its sportscars, building a production version of the electric all-wheel-drive DBX concept shown at the Geneva Motor Show, and adding a four-door Lagonda. OTHER NEWS & NOTES Domino's serves up purpose-built delivery car Domino's revealed a purpose-built pizza delivery car based on the Chevy Spark. It's called the DXP, for Delivery Expert, and it can handle up to 80 pizzas. The pies stay warm thanks to an oven located behind the driver's seat, and the DXP is sauced up with a puddle-lighting feature that projects the Domino's logo outside of the car. Power comes from the Spark's stock 1.2-liter four-cylinder engine rated at 84 hp that gets up to 39 mpg on the highway. Chevy dealers will be trained to service the DXP.

Experimental mid-engine XP-819 Corvette going up for auction

It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.