1958 Chevy Impala***supercharged 350ci****built To Drive & Enjoy! on 2040-cars

Auto blog

Chevy Volt replacement battery cost varies wildly, up to $34,000

There's a growing hubbub in the plug-in vehicle community over what looks like some ridiculously cheap replacement batteries for the Chevrolet Volt going up for sale. GM Parts Online, for example, is selling a replacement Volt battery with an MSRP of $2,994.64 but, with an online discount, the price comes down to $2,305.88. For the 16-kWh pack in the 2012 Volt, that comes to a very low $144.11 per kilowatt hour (kWH). But is it a real deal? How can it be, when a Chevy dealer may quote you a price of up to $34,000 to replace the pack? For a 16-kWh Volt pack, $2,305.88 comes to a very low $144.11 per kWh. But is it a real deal? Battery packs in alternative propulsion vehicles are usually priced by the kWh and, historically, they've been thought to be in the range of $500-per-kWh for OEM offerings. Since automakers are understandably secretive about their costs, we still don't know what the real number is today, but we do know it varies by automaker. Tesla, for example, has said it pays less than $200-per-kWH at the cell level but, of course, a constructed pack would be more. Whatever is going on, li-ion battery prices are trending downward. So, $144.11 certainly sounds great, but what's the story here? Kevin Kelly, manager of electrification technology communications for General Motors, reminded AutoblogGreen that GM Parts Online is not the official GM parts website and that, "the costs indicated on the site are not what we would charge our dealers or owners for a replacement battery. There would be no cost to the Volt owner if their battery needs replacement or repair while the battery is under the eight year/100,000 mile limited warranty coverage provided by Chevrolet." A single price tag also can't be accurate for everyone, Kelly said. "If the customer needs to have their battery repaired beyond the warranty, the cost to them would vary depending on what needs to be replaced or repaired (i.e. number of modules, which specific internal components need replacement, etc.)." he said. "So, it's hard for us to tell you exactly what the cost would be to the customer because it varies depending on what might need to be repaired/replaced. As a result, the core charge would vary." But, is the $2,300 price even accurate for anyone? Thanks to a reader comment, we see that this similar item on New GM Parts makes it look like the lithium-ion modules that Kelly mentioned – where a lot of the expensive bits are – are not included.

Watch this time-lapse build of the Chevy SS for NASCAR

There's only about a week left until we get our first look at the production version of the 2014 Chevrolet SS sedan, but Chevrolet NASCAR teams have been looking at the race version of the car all winter. Autoweek has posted a really neat time-lapse video showing just a portion of what it takes to build one of NASCAR's new Gen6 stock cars.
Though the video is quite brief, it does show almost the entire build process starting with just the car's nose, and it gives us a good look at how integral the template is to the final product. As a bonus, Hendrick Motorsports also provided some videos showing two of its teams performing pit stop tests over the winter. The second video shows some of the more detailed aspects of the racecar's rear end, including the stock-looking trunk cutout and a newly mandated rear bumper extension that will be used on super speedways like Daytona and Talladega.
To see what Team Chevy has been up to all off-season, check out all three videos posted after the jump.

Star Wars Car Drives To The Dark Side Of Comic Con

When it comes to designing coveted collectible toys for sale at Comic-Con, the annual celebration of pop culture lifting off Thursday in San Diego, the sky's the limit for the designers at Mattel. Fittingly, the building where Mattel's dreamers conceive of their limited-edition playthings is just down the street from the Los Angeles International Airport. Inside the colorful design center - a Hot Wheels-themed shuttle bus transports employees from Mattel's parking garage - the designers have spent the past year working on 10 toys created especially for the Comic-Con crowd, including a replica of the Batmobile from the upcoming game "Batman: Arkham Knight" and a 9-inch-tall action figure of Superman killer Doomsday. "We don't have to worry about retail. We don't have to worry about margins," said Doug Wadleigh, Mattel's senior vice president of global brand marketing for boys and entertainment. "We don't have to worry about operational efficiencies. We only have to worry about creating the coolest toys for our fans. Period." It also offers some escape from Mattel's reality these days. Like other toy makers struggling in this digital, video-centric age, the company is trying to remain relevant in the retail world. Core brands like Barbie have seen less of a demand, with a 14 percent drop in sales in the first quarter of this year. Mattel had a net loss for the first three months ending March 31 that totaled $11.2 million. But things will at least seem rosier at Comic-Con, where eager buyers for the toys await (the only other place they will be sold is on the Mattel collector's site). Mattel's exclusives this year run between $20 and $85, but elite toys can fetch much more when they're put up for auction. The crown jewel for Wadleigh and his team this year is a Darth Vader die-cast car, the first official collaboration from Hot Wheels and the "Star Wars" franchise. The car - imagine if a Chevrolet Corvette C5 and the villainous Sith lord's helmet had a baby - comes in a sleek black box and encased in a replica of Vader's lightsaber, complete with a swooshing sound effect. "We've been trying to partner with Lucasfilm and Disney on this property for a long time," said Wadleigh. A full-size working replica of the Vadermobile will be on display at Mattel's booth at the massive San Diego Convention Center.