2008 Chevy Express 2500 Extended Commercial Van W/ Carpet Cleaning Equipment on 2040-cars

Auto blog

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.

Weekly Recap: BMW rolls out ambitious plug-in hybrid electric plan

"We believe that for the United States, this is going to be very important." – Julian Arguelles Let there be no doubt, BMW is serious about electric vehicles. The German automaker said this week it will make plug-in hybrid versions of all of its core models, an aggressive move that demonstrates its commitment to electric propulsion systems. BMW did not specify which vehicles will get the plug-in systems or provide a timeline for when they will arrive. But the announcement is clearly more than blustering, and the company revealed a 3 Series plug-in prototype this week at an event in France. BMW said the 3 Series uses a version of its 2.0-liter turbocharged four-cylinder engine (240 horsepower, 300 pound feet of torque) with an electric motor sandwiched between the engine and transmission in place of the torque converter. It has an all-electric range of 22 miles. A plug-in X5 with the same powertrain was also displayed alongside the 3 Series, though the X5 has been on the auto-show circuit for more than a year, including a recent stop in Los Angeles. Those two vehicles use "eDrive," and BMW's plans represent the first widespread transfer of its technology from development of the i3 and i8 models to more mainstream products. BMW said it's developing electric powertrains so they can be deployed rapidly across its range, and they are flexible enough to be used with fuel cells in future products. Enticingly, BMW is also working on a "Power eDrive" system, which debuted in a 5 Series GT concept at the event in France. This setup has two electric motors powered by a 20-kilowatt-hour battery pack, and when teamed with a four-cylinder turbo, pump out about 670 hp. Reinforcing BMW's commitment, the company will add more than 200 jobs at its factory in Dingolfing, Germany, to support electric-vehicle development. The moves come as BMW and other automakers diversify their portfolios while fuel economy and emissions regulations are getting tighter around the world. The United States has set a 54.5-mpg CAFE requirement for the 2025 model year. BMW said the electric vehicles were developed with an eye toward the US market, its government policies and its wide-ranging commuting styles. "We believe that for the United States, this is going to be very important," spokesman Julian Arguelles said. Ben Scott, a senior analyst in London with automotive research firm IHS, said BMW's moves are expensive – but necessary – to keep pace with the market.

Weekly Recap: Lincoln Continental serves up the style, Cadillac CT6 delivers the substance in New York

Lincoln and Cadillac grabbed the spotlight this week at the New York Auto Show in a dramatic fashion that evoked the brands' glory days. America's two luxury carmakers went toe-to-toe with their glittering reveals and plans for ambitious expansion. Both were selling their technology, style and the promise of a better future. Cadillac vs. Lincoln. At the Javits Center, 2015 seemed a lot like 1956. Neither company was interested in drawing comparisons with the other, which is fair, and accurate. They're in vastly different places in terms of sales and the pace of their turnarounds, but they hope to reach the same eventual destination at the pinnacle of the luxury-car world. Lincoln used the element of surprise to great effect with the Continental concept. A production version is still at least a year away, and the company was vague on details. Officially, we don't even know if it is front- or rear-wheel drive, though speculation abounds. Who cares? The seats can be adjusted 30 ways! The Continental also showed off a bold chrome grille that will be the new face of Lincoln. The blue bomber also rolled on blinged-out 21-inch polished aluminum wheels, used a 3.0-liter EcoBoost engine and had huge LED head lights with "laser-assisted" high beams. All of this resulted in almost blinding attention. The concept drew rave reviews, stirred controversy with Bentley designers who argued Lincoln ripped them off, and most importantly, pointed a way forward for the newly determined brand that hopes to compete with Mercedes, BMW, Audi, Cadillac and Lexus. View 32 Photos Meanwhile, Cadillac showed the CT6, a finished product that will top its range and is loaded with the best and latest technologies General Motors has at its disposal. With production starting late this year, Cadillac had more specifics at the ready. Engines? Cadillac has a couple V6s and a turbo four for sure. It's working on a hybrid, and has considered a V-Series variant. It's based on a new rear-wheel-drive, aluminum-intensive chassis called Omega, features an advanced collision-mitigation system with automatic braking and has a cabin that's laden with "leathers, exotic woods and carbon fiber." It will be assembled at GM's Detroit-Hamtramck factory and goes on sale next year. At this point, Cadillac is more than willing to talk about every except for the price. The devil was not in the details for Cadillac, as evidenced by the CT6. But it wasn't for Lincoln either.