2014 Chevrolet Equinox 1lt on 2040-cars

Auto blog

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Weekly Recap: Volvo buys Polestar, makes performance a priority

Volvo is taking its performance business in-house, and the Swedish carmaker announced Tuesday that it bought tuning company Polestar, which has long been known for producing sporty Volvos. The move allows Volvo to ramp up its performance business, and it plans to increase Polestar-branded vehicle sales to 1,000 to 1,500 annually, up from the 750 total projected for this year. The companies have been working together on motorsports projects since 1996. Financial terms of the sale were not released, and Polestar workers will move over to Volvo. Former Polestar owner Christian Dahl will keep control of the Polestar racing team and operate it under a new name. In addition to sales volume, Volvo has ambitious plans for other parts of Polestar, including its aftermarket business. Volvo also said it will use its twin-engine hybrid technology for Polestar models in the future, though specifics and timing were not revealed. Meanwhile, Volvo announced it will offer a run of 265 total Polestars in the United States for the 2016 model year, with S60 and V60s available. "Driving a Volvo Polestar is a special experience. We have decided to bring this experience to more Volvo drivers, placing the full resources of Volvo behind the development of Polestar as the model name for our high performance cars," Volvo CEO Hakan Samuelsson said in a statement. OTHER NEWS & NOTES 2016 Chevy Silverado, GMC Sierra, get nose jobs Automakers tend to refer to light updates as 'facelifts,' and that's exactly what Chevy gave the 2016 Silverado and GMC Sierra. Chevy slightly changed the front end of the truck. Using the one photo released of the new Z71 model as a guide, we can see that the headlights went from a stacked vertical design to single bulbs, and they are set on top of LED running lights. The grille has more body-colored elements instead of shiny metal, and the hood has a new line running down the middle (look really closely). The design theme will be similar across the portfolio, though materials and details will vary, a spokesman said. Some models, like the High Country and LTZ will have more chrome, and the LEDs are only for the upper trims. Chevy also said it will use the eight-speed automatic transmission on more versions of the Silverado, and it updated the MyLink feature to support Android Auto and Apple CarPlay.