2006 Chevrolet Equinox Lt on 2040-cars

Auto blog

Recharge Wrap-up: Detroit Electric teaser video, Nissan Leaf is Good Housekeeping "Tried and Tested"

Detroit Electric has a new teaser video and has updated its brand in preparation of the introduction of the SP:01. The refreshed logo uses a blue and white color palette, and the company has also given its website a new look. The teaser video, which gives a sneak peek at the exterior of the SP:01, shows the car taking form in the midst of an electrical storm. Watch the video or learn more in the press release below. Abengoa is celebrating the grand opening of a commercial scale cellulosic ethanol plant in Hugoton, KS. When running at full scale, the refinery will produce up to 25 million gallons of ethanol a year. The plant will also generate enough electricity to power itself and put some back into the grid. Energy Secretary Ernest Moniz was on hand for the dedication, saying, "Every gallon of cellulosic ethanol produced and used to fuel our vehicles reduces the impact of harmful greenhouse gas emissions by greater than 60 percent as compared to conventional gasoline." Learn more at Energy.gov. Good Housekeeping has named the Nissan Leaf one of its "Tried and Tested" vehicles. The magazine called the Leaf SL its top "Roomy Electric" vehicle in its November issue. The magazine's research institute evaluated the EV based on track and road driving, ergonomics and convenience features. Good Housekeeping made note of the car's "impressive" range, but according to Nissan's Fred Diaz, "the real beauty of the Nissan Leaf is that it's roomy and, best of all, fun to drive." Read more in the press release below. Quasar Energy Group produces compressed natural gas from sewage and garbage. It uses things like grains leftover from brewing Budweiser, food waste from a baseball stadium and sewage sludge to produce the gas through anaerobic digestion. The compressed gas can then be used to power cars like Chevrolet's Bi-fuel Impala, which goes on sale later this year. Chevrolet likens the situation to the Delorean time machine in the Back To The Future movie series, which uses garbage to fuel its fusion generator. Watch the video and read the press release below to learn more. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Chevy Bolt-based prototype may be a Buick EV for China

Late last spring, we got a look at a GM prototype that was clearly based on the Chevy Bolt EV, but with updated styling. It seemed like it could be a more crossover-styled Bolt, given the recently trademarked name of EUV. Now we get another look at the prototype, but the bodywork seems less suggestive of a Chevy, and more of a Buick. This vehicle definitely still appears to be based on the Bolt, rather than on another small GM platform. In the photos of it next to the current model, the size, wheelbase and profile are extremely similar. There are differences, though. The nose isn't as sloped or as rounded, and the rear window kicks up a little earlier. The biggest changes are in the front and rear fascias, and it's here that we see hints of Buick. There are prominent air inlets on each side of the front bumper that give the car a more aggressive look. The headlights still have a fairly rounded, organic look, but with little extensions like fangs underneath. The styled running-light section, rounded shape and the smoked lenses seem very Buick-like. The grille features a large badge that doesn't fit the shape of a bow-tie, and is more that of a round logo like Buick's. Around at the back, the full-width taillights stand out, and in the middle there is obviously a round badge, again like a Buick. The wide taillights would also be a natural evolution of Buick's current light design language that uses somewhat wide and thin lights. The rear bumper has been redesigned with new lower taillights. Now that we've established that this seems very much like a Buick, we don't think we'll see this particular version offered here with the badge. This is more likely a Buick version of the Bolt for the Chinese market, where the brand is associated with luxury and has been the spearhead for GM's electric and hybrid models. In fact, the Chevy Volt hybrid was sold there as the Buick Velite 5, which was part of a family of a electrified Velite models. This would probably also carry a Velite badge as well. While we might not see this specific Buick variant, we probably will see it offered as a Chevy in some form. With its more aggressive, crossover shape, it could be the rumored EUV model. Or it could be just a refresh of the current Bolt, since the model has been largely unchanged since its introduction for the 2017 model year. And extrapolating from this prototype, we can see how the headlights could be tweaked to tie into those air scoops as on the Suburban and Silverado.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.