1986 Chevrolet El Camino Base Standard Cab Pickup 2-door 5.0l on 2040-cars

Auto blog

Experimental mid-engine XP-819 Corvette going up for auction

It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.

2016 Chevy Volt powertrain technical details

The last time General Motors launched a Chevy Volt, it was operating without really knowing how people would use the plug-in hybrid. Sure, it had experience with the EV1, but the Volt was a new kind of car, and you can see in the archives just how much time GM spent explaining this fresh, new powertrain to potential customers. Then, once the vehicle was released, the company collected voluntary data from a large number of owners to learn about their driving and charging habits. The company also asked them what they wanted most in the new version. There's got to be an algorithm buried somewhere in GM headquarters that was used to take all of the numbers GM collected and spat out the headline figures for the 2016 Volt: 50 miles of EV range and 41 miles per gallon. Another important number – price – is something GM isn't talking about yet (expect it in April or May), but the company is sharing some powertrain details about the upcoming car. At a preview lunch in Detroit last week for the SAE 2015 Hybrid & Electric Vehicles Technologies Symposium that's happening now in California, GM engineers Peter Savagian (who is presenting a paper on the new inverter used in the updated Volt) and Tim Grewe (talking about the entire second-generation powertrain) sat down with AutoblogGreen to tell us about the Volt's all-new propulsion system: The overall gist is that the new Voltec 5ET50 drive unit is lighter, smaller and more powerful thanks to a redesigned two-motor traction drive. As previously reported, the new engine is a 1.5-liter DOHC four-cylinder that offers 101-horsepower (at 5,600 RPM). Grewe said it's "great for range extension." The electric motor side of the powertrain offers 149 motoring horsepower from a two-motor, continuously variable transaxle. Initially, the new engine will be made in Mexico. GM will move production to Flint, MI during the first year it makes the 2016 Volt. The battery is slightly bigger in the new Volt – 18.4 kWh compared to 16.5 in the current-gen – and will have less range variation in the cold. GM is also using more of the overall capacity in the pack in the 2016 Volt than in previous versions, but is not saying how much more. GM is not ready to publish acceleration times just yet, but the 2016 Volt has improved numbers, especially when going from 30-60 miles per hour. Most everything on the new powertrain has become more efficient compared to the first-gen Volt.

GM recalling 686k Lambda-platform models for hatch repair

General Motors is recalling 686,287 units of its Lambda platform crossovers. On models equipped with a power rear hatch the system can potentially fail. This campaign includes the 2008-2012 Buick Enclave, 2009-2012 Chevrolet Traverse, 2007-2012 GMC Acadia, and 2007-2010 Saturn Outlook. According to GM's documents to the National Highway Traffic Safety Administration (as a PDF), dirt can get into a portion of the strut that holds up the hatch and cause the part to prematurely fail. There's a redundancy in place called the Prop Rod Recovery system that's designed to shut the liftgate if there's a malfunction. However, if the breakdown happens too quickly after the hatch is opened the prop rod might not work the way it's supposed to. If someone were in the way of the falling liftgate, they could be hurt. For the repair, dealers will update the software for the power liftgate actuator motor control unit to prevent the hatch from closing so quickly. They'll also check the operation of the system afterward. Related Video: RECALL Subject : Liftgate Struts may Fail and Liftgate may Fall Report Receipt Date: JUN 30, 2015 NHTSA Campaign Number: 15V415000 Component(s): STRUCTURE Potential Number of Units Affected: 686,287 All Products Associated with this Recall Vehicle Make Model Model Year(s) BUICK ENCLAVE 2008-2012 CHEVROLET TRAVERSE 2009-2012 GMC ACADIA 2007-2012 SATURN OUTLOOK 2007-2010 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2008-2012 Buick Enclave vehicles manufactured January 3, 2007, to February 29, 2012, 2009-2012 Chevrolet Traverse vehicles manufactured July 6, 2008, to February 29, 2012, 2007-2012 GMC Acadia vehicles manufactured September 15, 2006, to February 29, 2012, and 2007-2010 Saturn Outlook vehicles manufactured August 17, 2006, to March 18, 2010. The affected vehicles, equipped with the power liftgate option, have gas struts that hold the power liftgate up when open. These struts may prematurely wear and the open liftgate may suddenly fall. CONSEQUENCE: If the open liftgate unexpectedly falls, it may strike a person, increasing their risk of injury. REMEDY: GM will notify owners, and dealers will update the software for the power liftgate actuator motor control unit so that the motor will prevent the rapid closing of the lift gate, free of charge. The manufacturer has not yet provided a notification schedule.