Night Race Blue Metallic 2013 Corvette on 2040-cars

Auto blog

Evatran, Bosch will sell wireless home charger for as low as $1,998*

At the Consumer Electronics Show in Las Vegas today, the big news for plug in vehicles is that they can now start to ditch the plug. As expected, the system costs around $3,000 and is available for both the Nissan Leaf and the Chevrolet Volt. For the first 250 customers, though, Evatran is offering $1,000 off the standard price, a 30 percent discount. Deliveries start next month and Evatran says it expects the discounted units to all be snatched up in the first half of the year. The wireless charger charges as quickly as conventional corded systems. Called the Plugless Wireless EV charger, the 240-volt station will be installed by Bosch and needs a specific adapter to be used with the Volt or the Leaf (the Leaf version costs $100 more). So, any two-EV families out there will need to pony up double if there's a Chevy and a Nissan in the garage. Of course, since the Plugless system only works with older Leafs (2010-2012 model years - but with any Volt), any late adopters will not be able to take advantage of the new technology, for now. Evatran says the wireless charger "charges the Volt and Leaf as quickly as conventional corded systems and all vehicle features, such as charge-timers and phone applications, can be used seamlessly with the Plugless system." After the first 250 units, standard prices for the wireless chargers take effect again: $2,998 (Volt) and $3,098 (Leaf). Evatran says it will announce wireless chargers for additional vehicles and model years later this year. Evatran and Bosch offer Promotional Pricing as low as $1,998 to first 250 PLUGLESS™ Wireless EV Charging Customers LAS VEGAS, Jan. 6, 2014 /PRNewswire/ -- Evatran Group, Inc. ("Evatran"), in partnership with Bosch Automotive Service Solutions, announced today at the 2014 Consumer Electronics Show that it is offering reduced promotional pricing to the first 250 customers who opt to Go PLUGLESS with their electric vehicle ("EV") experience. The PLUGLESS system offers a convenient, wireless charging alternative to the repetitive process of unplugging and plugging-in electric vehicles. The reduced pricing includes all charging hardware and is as much as a 30% discount off the system's standard MSRP. The discount is available only to the first 250 customers. Initial shipments of the PLUGLESS system, the first wireless EV charging product in the world available to individual EV drivers, will begin in February 2014.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video: