Corvette 2013 Grand Sport 60th Anniversary Eddition on 2040-cars

Auto blog

Before Chevrolet's Redline, there was the Saturn Red Line

While Chevy rolls out Redline special editions across more of the lineup at this year's Chicago Auto Show, we've been eating some 'member berries and started thinking about the last time GM used the term. Back in 2004, Saturn rolled out Red Line (two words) editions of the Ion and Vue. The lineup was joined by the Sky Red Line in 2007, and the second-generation Vue kept the tradition going in 2008. This was in the heady days of the mid-2000s, before the financial crisis and GM's bankruptcy reorganization that saw the end of Saturn. The press release headline for the 2008 Sky is now cringe-worthy: "Hot-selling Sky helps drive Saturn product renaissance." Performance lineups were the hot new thing, as automakers attempted to cash in on the tuner trend popularized by The Fast and the Furious. Chevy had SS models, Pontiac had GXP, and Saturn had Red Line. Across the Detroit Metro area, Dodge had a slew of SRT models, and Ford's Special Vehicle Team brought us the SVT Lightning pickup, the SVT Focus, and a smattering of hopped-up Mustangs. The performance cred of Red Line models varied from car to car. The Ion Red Line shared the same engine as the original Chevy Cobalt SS, a 205-horsepower supercharged 2.0-liter four-cylinder, 65 hp more than stock. Car and Driver tested one with a 0-to-60-mph time of 6.1 seconds and said the Ion "tears down the wall that has separated enthusiasts from the Saturn brand for so long." The Vue Red Line, meanwhile, came with the same optional Honda-sourced 3.5-liter V6 you could get in the regular Vue, and added a stiffer, lower suspension, bigger wheels with more aggressive rubber, and recalibrated steering assist. When the Vue was redesigned for the 2008 model year, the Vue Red Line was a similar proposition. The engine was now from GM, and up 7 horsepower to 257, but you could get it in both Red Line and XE trim. Aside from the tire and suspension upgrades, Red Line models now came with a unique front fascia and rear exhaust cutouts. The most exciting Red Line, of course, was the high-performance version of the Sky roadster, which shared underpinnings with its Pontiac Solstice twin. This model came with GM's hot 2.0-liter Ecotec Turbo, good for 260 horsepower. The extra power was crucial in covering up the Sky's unfortunate manual gearbox ratios, which left the non-turbo model aching for torque in lower gears. As we all know, Saturn was taken by the grim reaper in 2009 after an attempt to sell the brand to the Penske Group.

2016 Chevy Volt will not need premium gas

Buried in the new technical details of the 2016 Chevy Volt released yesterday was a throwaway line about a small but important change that's due to the new 1.5-liter, four-cylinder engine. The first-gen Volt has always required premium gas but the new powerplant will be happy burning plain old regular. The Volt's chief engineer, Andrew Farah, told AutoblogGreen that the change was due to today's Volt owners explaining they were not happy paying for top-shelf petroleum. "The ability to use regular unleaded was based directly on customer feedback," he said. "Since the range extender is an all-new engine, it was optimized to use regular unleaded at the outset. Using regular fuel will not have effect on vehicle acceleration or other performance factors." As Larry Nitz, GM's executive director of vehicle electrification, told AutoblogGreen yesterday, the new engine is more powerful and quieter than the outgoing 1.4-liter engine that's used in the current Volt. Fuel economy and EV range specs for the next-gen Volt are not expected until the full car is revealed at the Detroit Auto Show in January.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.