4055 Actual Miles 2 Tops Red Automatic on 2040-cars

Auto blog

Honda, Chevy reveal low-drag speedway aero for Indy 500

As the two automakers currently participating in the IndyCar Series, both Chevy and Honda were invited this year not only to provide engines to the teams on the starting grid, but to develop their own aerodynamics packages as well. Both revealed their designs for the road-course races a few months ago, but with the Indy 500 approaching at break-neck speed, they've now unleashed their aero approaches for speedways. Both are based on the Dallara DW12 chassis introduced to the series a couple of years ago, but sacrifice some of their downforce at the altar of speed. And you can tell as much from looking at them: both Honda (above) and Chevy (below) have streamlined their designs, with single-plane front wings, lower-profile rear wings and fewer winglets on the body and around the wheels in between. The idea is to allow the cars to reach higher top speeds with less drag, while offering the necessary amount of downforce for the banked turns. With the four opening road-course rounds complete, teams using either automaker's equipment will keep the existing aero kits on their cars for the Grand Prix of Indianapolis on the infield course next week, then switch to the speedway package for the Indianapolis 500 later this month. Then it'll be back and forth for the rest of the season as the circus switches between road courses and speedways. Honda Unveils 2015 IndyCar Super Speedway Aero Kit Apr 30, 2015 - SPEEDWAY, Indiana - To be used at the Indianapolis 500 - Manufacturer seeking 11th Indianapolis 500 victory since 2004 - First public running to take place Sunday at Indianapolis Honda today debuted the "Super Speedway" aero kit of aerodynamic upgrades and components its teams will use at this year's 99th running of the Indianapolis 500. The Honda Super Speedway Aero Kit, produced by Honda Performance Development, Honda's racing arm in North America, includes a variety of individual aerodynamic components fitted to the existing Honda-powered Dallara Indy car chassis. All are intended to give Honda's six Indy car teams – encompassing a potential 17 '500' entrants - the ability to maximize performance at the 2.5-mile Indianapolis Motor Speedway oval and other large ovals ( over one mile in length) on the 2015 Verizon IndyCar Series schedule. "We're excited to unveil our Super Speedway aero kit, the newest element in this era of enhanced manufacturer competition in the Verizon IndyCar Series," said Art St. Cyr, president of HPD.

Plug In 2014: VIA makes the case for 'free' plug-in hybrid work vans, trucks

If you're a fleet manager who's been waiting anxiously for the chance to buy a plug-in hybrid van from Via Motors, your wait is almost over. If you work for the right fleet, anyway. David West, the chief marketing efficer for VIA Motors, took AutoblogGreen for a ride around the San Jose Convention Center in a Via van sporting an Electric Blue paint job as part of the Plug In 2014 Conference this week and gave us an update on how things are coming along. The big news is that the Via PHEV van production is going to start by the end of September. Via can currently build two vans an hour at its production plant in Mexico, or about 16 a day and could easily double that. "That would get us to 20,000 a year with two full lines running," West said. "We have the capacity." "There is no way gas can compete with electric." – David West, Via Motors But they can't sell that many quite yet. By the end of December, around 350 Vans will be made, mostly for a $20-million program from the Department of Energy (DOE) and the South Coast Air Quality Management District that will see the vehicles used by fleets that will report energy data to the Idaho National Lab. Via is also finishing up CARB certification for both the van and the company's plug-in hybrid pick-up truck. About 50 percent of Via's technology in the truck will not need to be tested again, since it's the same as what's in the van, but things like crash tests will need to be done twice. Despite the progress, this is not where Via hoped it would be today. The bankruptcy of battery supplier A123, "took about a year off our timeline," West said. "It's been getting a little slow getting it to market, there have been some challenges, particuarly since we had the country's worst recession right in the middle of this wrap up, but it's inevitable in my mind. There is no way gas can compete with electric." Maybe that's why FedEx has expressed an interest in buying around 5,000 units, West said. FedEx already has some pilot vehicles, just like Verizon does, and PG&E wants to replace all of their gas trucks with electric vehicles, which would be another 3,000 sales, he said. Besides the fuel savings, vehicles like these, with easy on-site power generation, could also work wonders in post-disaster situations, he said, since they could replace the need for generators.

Is this '47 Chevrolet a rat rod or a sports car?

These days there are plenty of vehicles that blur the conventional automotive class structures. For instance, was the Honda Crosstour a wagon or an SUV? And what exactly was the Nissan Murano CrossCabriolet? Regardless, those line-blurring cars (or trucks) are out there, and though this one didn't roll off a production line, it's still quite the automotive head-scratcher. Hailing from Missouri, this epic creation is one part mad science experiment, one part 1947 Chevrolet pickup, and one part '95 Mercury Cougar. Add it all up and you get an awesome truck-sports-car hybrid, complete with an outrageous wing and a V8 to boot. And interestingly enough, it's up for sale . RELATED: Check out this Wild-Styled Lamborghini Rat Rod So how does it all come together? According to the listing, the Chevrolet truck cab (which had previously been chopped) was sanded down to bare metal and given a thorough shellacking of clear coat. It was then melded together with the front end of a 1995 Chevrolet S10 pickup truck, and set low to the ground on Bilstein suspension drop spindles. Stance achieved. But instead of fielding an engine from either of those pickups, it pulls its heart from a 2005 Chevrolet Tahoe SUV—a big 5.3-liter V8 heart, that is. It comes backed-up to a GM Turbo 400 automatic transmission. Towards the rear however is where things get really interesting. A Copper Pearl coated tube frame chassis both attaches the rear independent suspension (a la Mercury Cougar) to the racy spoiler, as well as secures the rat rod's rear-mounted radiator, fan, and fuel tank. I'm not quite sure why, but it just looks glorious. RELATED: Reports Say Mid-Engine Corvette Will Arrive in 2018 Inside the vintage cab, the Chevrolet furthers its racing proclivities (it's said to have won burnout and auto-cross events) with a pair of harnessed racing seats, a drift brake, a detachable steering wheel, and a tachometer with oil and temperature gauges, but oddly no speedometer. The shifter is a crescent wrench. And its shift boot? That's a Crown Royal Purple bag. All in all, this grin-worthy Frankenstein creation tallies up bits and pieces from four different vehicles (five if you include the Camaro wheels), which make it truly a mash-up of epic proportions. Internet, what do you think? Related Video: This article by Zach Doell originally appeared on Boldride. Design/Style Chevrolet Mercury Auctions Coupe Special and Limited Editions Classics eBay rat rod