2011 Callaway Sc606 Chevrolet Corvette Grand Sport Coupe 2-door 6.2l on 2040-cars

Auto blog

Recharge Wrap-up: Range-extended EV taxis in London, 2016 Chevy Volt interior two years old

The first Metrocab range-extended EV taxis are operating on the streets of London. The cabs use a 12.2-kWh battery and two 50-kW motors, as well as a 1.0-liter gasoline range extender. Fuel economy is 98 MPGe on the ECE101 cycle, and total driving range is over 348 miles before needing to charge or refuel. Cabbies can expect to save GBP20 to GBP40 (about $30 to $60) per day on average. "The cash savings on fuel are significant, the ride and comfort outstanding, and my first customers are thrilled with the new cab," says the first operator of the new EV taxi, Preston Morris. "With its air suspension providing unrivaled comfort, panoramic glass roof for views of the city and silent powertrain, what's not to like?" Read more in the press release below. Chevrolet has had the interior design of the 2016 Volt finished for two years already, according to GM interior designer John McDougall. Beginning around 2010, GM received sketches from designers worldwide before narrowing it down to a handful of designs. Then the top three choices were molded from clay. The chosen theme was then refined for up to 18 months. "Every little thing you can imagine goes into that," says McDougall. "The glare angle from the windows, the placement of the controls, the placement of the seat. You have to create something that's beautiful and functional." Read more at GM Authority and at Inside EVs. More details have emerged about the Second Life Batteries Alliance. Vattenfall has announced a research project in partnership with BMW and Bosch to use retired EV batteries for stationary, grid-connected energy storage in Hamburg, Germany. Over 100 lithium-ion batteries from BMW i3 and ActiveE vehicles will make up a two-mWh storage unit for grid balancing, enough to power 30 four-person households for a week. The system is "compact enough to fit in a small building," says Bosch. Such storage systems are especially fit for storing and moving alternative forms of energy, which often fluctuate in supply more than electricity from a traditional power plant. Vattenhall will operate the storage unit for 10 years, with Bosch managing the batteries, during which time the three partners hope to learn more about battery applications and their performance over time. Read more at Green Car Congress, or in the press release below.

Plug In 2014: VIA makes the case for 'free' plug-in hybrid work vans, trucks

If you're a fleet manager who's been waiting anxiously for the chance to buy a plug-in hybrid van from Via Motors, your wait is almost over. If you work for the right fleet, anyway. David West, the chief marketing efficer for VIA Motors, took AutoblogGreen for a ride around the San Jose Convention Center in a Via van sporting an Electric Blue paint job as part of the Plug In 2014 Conference this week and gave us an update on how things are coming along. The big news is that the Via PHEV van production is going to start by the end of September. Via can currently build two vans an hour at its production plant in Mexico, or about 16 a day and could easily double that. "That would get us to 20,000 a year with two full lines running," West said. "We have the capacity." "There is no way gas can compete with electric." – David West, Via Motors But they can't sell that many quite yet. By the end of December, around 350 Vans will be made, mostly for a $20-million program from the Department of Energy (DOE) and the South Coast Air Quality Management District that will see the vehicles used by fleets that will report energy data to the Idaho National Lab. Via is also finishing up CARB certification for both the van and the company's plug-in hybrid pick-up truck. About 50 percent of Via's technology in the truck will not need to be tested again, since it's the same as what's in the van, but things like crash tests will need to be done twice. Despite the progress, this is not where Via hoped it would be today. The bankruptcy of battery supplier A123, "took about a year off our timeline," West said. "It's been getting a little slow getting it to market, there have been some challenges, particuarly since we had the country's worst recession right in the middle of this wrap up, but it's inevitable in my mind. There is no way gas can compete with electric." Maybe that's why FedEx has expressed an interest in buying around 5,000 units, West said. FedEx already has some pilot vehicles, just like Verizon does, and PG&E wants to replace all of their gas trucks with electric vehicles, which would be another 3,000 sales, he said. Besides the fuel savings, vehicles like these, with easy on-site power generation, could also work wonders in post-disaster situations, he said, since they could replace the need for generators.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging