2007 Chevrolet Corvette 2 Tops Repairable Light Damage Rebuildabe Salvage Title on 2040-cars

Auto blog

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

Recharge Wrap-up: Panasonic, Tesla on Gigafactory deal?

Bentley has been awarded the Carbon Trust Standard for reductions of carbon, water use and waste production in manufacturing. The Carbon Trust is an organization that helps groups such as businesses and governments reduce carbon emissions, use of energy and resources, and waste output. From 2011 to 2013, Bentley reduced CO2 emissions by 16 percent per car manufactured, curtailed water use by 35.7 percent, and saw significant waste reductions. Darran Messem of Carbon trust says, "Bentley is clearly passionate about continuing to improve its environmental performance, which is reflected by the fact the company has consistently invested in new technology." Read more in the press release below. Chevrolet is giving 12 Volts to MBAs Across America. The organization will use the range-extended electric cars in its efforts to help MBA students learn from and work with small business owners. As part of the MBAs Across America program's first year, four students drove 8,000 miles to provide entrepreneurs with free business counseling. The program has expanded, and this year, teams of MBAs will use the Volts to travel to 25 cities to offer their services. Learn more about the partnership between Chevrolet and MBAs Across America in the press release below. A professor from the University of Michigan has found fuel cycle analysis to be too flawed to be relied upon for measuring CO2 impacts of transportation fuels. Professor John DeCicco of the university's Energy Institute feels that the flaws in calculating the carbon footprint of liquid fuel production and combustion make such lifecycle analysis impractical. He suggests, instead, to focus to carbon capture. Since capturing CO2 directly from a vehicle is probably never going to happen, DiCicco believes the solution is to capture carbon from the atmosphere in sectors outside of transportation. Says DiCicco, "Research should be ramped up on options for increasing the rate at which CO2 is removed from the atmosphere and on programs to manage and utilize carbon fixed in the biosphere, which offers the best CO2 removal mechanism now at hand. Such strategies can complement measures that control the demand for liquid fuels by reducing travel activity, improving vehicle efficiency and shifting to non-carbon fuels." Read more at Green Car Congress. Global transportation energy consumption is expected to increase by 25.4 percent by 2035, according to a report by Navigant Research.

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video: