2005 Chevrolet Corvette Convertible - 34k Miles on 2040-cars

Auto blog

Smaller Cars Endure Big Problems On Crash Test

In a crash test of 11 of the smallest cars on the market, only one vehicle received an acceptable rating. The rest received marginal or poor ratings in the study, providing evidence that supports a widely held notion that smaller cars are among the least safe on the road. No other vehicle group has performed as poorly on a new crash test than these mini cars, says the Insurance Institute for Highway Safety, the nonprofit group that conducted the testing. The latest results of which were released Wednesday. The Chevrolet Spark was the only car earning an overall "acceptable" rating on the small-front overlap test, and even that vehicle had its shortcomings, IIHS said. "Small lightweight vehicles have an inherent safety disadvantage," said Joe Nolan, the senior vice president for vehicle research at IIHS. "That's why it's even more important to choose one with the best occupant protection. Unfortunately, as a group, minicars aren't performing as well as other vehicle categories." The Mazda2, Kia Rio, Toyota Yaris and certain Ford Fiesta models all received "marginal" overall grades on the test, while the Mitsubishi Mirage, Nissan Versa, Toyota Prius C, Hyundai Accent, Fiat 500 and Honda Fit all earned "poor" ratings. Results from these sub-compact cars fare much worse than vehicles sized just a little bit bigger, IIHS said. Among 17 cars evaluated in the small category, five earned "good" ratings and five more earned "acceptable." Only introduced a year ago, the small-front overlap test has quickly become a key indicator of differences in automotive safety. IIHS introduced it as a way to replicate what happens when the front corner of a vehicle collides with a tree or utility pole at 40 miles per hour. In the real world, these sorts of accidents are more dangerous than others, in part because they bypass the front-end crush zones on most cars. TOP 5Most Researched Sedans 2013 Honda Accord MSRP : $21,680 2013 Hyundai Sonata MSRP : $20,895 2013 Nissan Altima MSRP : $21,760 2014 Honda Accord MSRP : $21,955 2013 Toyota Corolla MSRP : $16,230 Automakers have been rushing to make design changes to the front ends of their cars. Without a grade of acceptable or better, they cannot qualify for the IIHS' overall Top Safety Pick+ honor, given annually to the safest models on the market.

Why the Corvette is Chevrolet's billion-dollar baby

Edmunds has worked up a piece that tries to figure out just how much the global Chevrolet Corvette economy is worth, a spitballed guesstimate putting the number at more than $2.5 billion with the proviso that the number is probably low. It starts by taking Corvette's new car sales of 14,132 units last year, which would equate to $714,725,900 (including destination) assuming ever car sold was a base coupe with no options. In the final tally, a little extra padding gets that number up to $750,000,000.
But that's not all. Consider this: Many of the almost 1.4 million Corvettes produced over the model's history are still on the road. There are new parts being produced and aftermarket companies like Mid-America Motorworks deaing business, that single Illinois company doing more than $40 million a year in sales. There are the Corvette events large and small, restorers who do nothing but Corvettes, salvage yards that deal only in used Corvette parts and the Corvette magazines where owners find all this stuff.
And then there are the Corvette-themed tchotchkes, every single one of which provides a tiny contribution to the huge licensing royalties that General Motors collects every year. The article admits there's no way to come to an accurate number, but it just goes to show how valuable one specific model can be to a company.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.