65 Chevy Corvair Corsa Convertible Manual 4 Speed on 2040-cars

Auto blog

GM learning from current Chevy Volt owners as it works on next-gen model

Details of the second-generation Chevrolet Volt extended-range plug-in hybrid are coming in at a trickle, and the latest is that the 2016 model-year Volt will be improved in all meaningful areas, including performance and all-electric range, says General Motors powertrain director Larry Nitz. 60 percent of Volt customers only charge using a standard 110 outlet. Nitz was speaking to Autoline After Hours about the current and future Volt. He said that GM has been tracking Volt driving habits and found that about two-thirds of the Volts' collective miles are driven in electric mode, and that 81 percent of all Volt trips were done in pure EV mode. Additionally, Volt drivers plug the car in 10 times each week, on average. Nitz also said 82 percent of the Volt's commuting miles are coming from the plug instead of the gas tank. Oh, and 60 percent of Volt customers only charge using a standard 110 outlet. Last month, GM released a teaser shot of the 2016 Volt (above) and said the car would make its worldwide debut at the 2015 North American International Auto Show next January. Earlier this year, the Volt was reported to be getting a new chassis for the upcoming version. The Volt could use a bit of new life. Through August, Volt sales were down 12 percent from a year earlier to 13,146 units, and sales plunged 25 percent alone. That compares unfavorably to the Nissan Leaf battery-electric vehicle, whose 2014 sales have jumped 34 percent to almost 19,000 units. You can see Nitz dish the goods in the video below (Volt comments start at around minute 15). You will also notice AutoblogGreen contributor Gary Witzenburg talk about his history with the EV1 and share his take on the Volt. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Chevy working on production Impala Midnight Edition

To put together the Impala Blackout concept for SEMA, Chevrolet didn't need to go much further than its accessories catalog. The in-house connection is what could make it possible for Chevy to get a production version of the Blackout into dealers this model year, with its few bits of chrome trim and dark detailing on the 19-inch aluminum wheels set into an abyss of gloss black paint, black Bowtie, grille surround, rear spoiler and mirror caps. The interior is black leather, with stainless steel for the sill plates and pedals, and an 11-speaker Bose audio system, and it gets the optional 305-horsepower, 3.6-liter V6. The brand's marketing director for cars and crossovers, Steve Majoros, told Edmunds that it could come in late spring, and that it will be called "Midnight Edition." Majoros didn't give any indication of pricing or if the production car will be spec'd out like the concept. If you simply don't want to wait for late spring, you could work your DIY mojo by putting one together the same way Chevrolet did: give the accessories catalog a workout. Related Video:

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging