1965 Chevrolet Corvair 2.7l 180 Turbo, Runs/drives Great, Needs Finishing. on 2040-cars

Auto blog

Nissan recalls 3.5 million vehicles over airbag sensor

Nissan is recalling 3.53 million vehicles globally – 3.2 million in the United States – because the front passenger airbag may or may not deploy properly in the event of a crash. In affected vehicles, the occupant sensing system may not properly register a person sitting in the passenger seat. Passenger-side airbags in roughly 622,000 Nissan Sentra models built between 2013 and 2016 may deploy in crashes when they shouldn't, such as when a child is in the seat. 2016-2017 Nissan Maxima, 2013-2016 Nissan Altima, NV200, and LEAF, 2013-2017 Nissan Pathfinder, 2014-2016 Nissan NV200 Taxi, Infiniti QX60 and Q50, 2014-2017 Nissan Rogue, 2015-2016 Nissan Murano, Chevrolet City Express and 2013 Infiniti JX35 vehicles suffer from the opposite problem. In those models, the airbag may not deploy when it is supposed to. Nissan is aware of at least three crashes where airbags in one of the above models did not function properly, resulting in "moderate injuries." There have already been four recalls since 2013 for similar issues in Nissan vehicles. If you own one of these cars, expect a letter from Nissan in short order (or from GM if you own a Chevy City Express). Related Video: RECALL Subject : Passenger Air Bag may not Deploy due to OCS Error , 1 INVESTIGATION(S) Report Receipt Date: APR 26, 2016 NHTSA Campaign Number: 16V244000 Component(s): AIR BAGS Manufacturer: Nissan North America, Inc. SUMMARY: Nissan North America, Inc. (Nissan) is recalling certain model year 2016-2017 Nissan Maxima, 2013-2016 Nissan Altima, NV200, LEAF and Sentra, 2013-2017 Nissan Pathfinder, 2014-2016 Nissan NV200 Taxi, Infiniti QX60 and Q50, 2014-2017 Nissan Rogue, 2015-2016 Nissan Murano, Chevrolet City Express and 2013 Infiniti JX35 vehicles. In these vehicles, the front seat passenger Occupant Classification System (OCS) may incorrectly classify an adult passenger as a child or classify the seat as empty despite it being occupied. As a result, the passenger frontal air bag may be turned off and not deploy in the event of a crash. CONSEQUENCE: If the passenger frontal air bag does not deploy as intended in the event of a crash, the passenger is at an increased risk of injury. REMEDY: Nissan will notify their owners. Chevrolet City Express owners will be notified by General Motors.

Sinkhole Opens Up In National Corvette Museum, Swallows Eight Cars

More cars are being moved inside the National Corvette Museum in Bowling Green, Ky. to avoid falling down the same sinkhole that swallowed eight classic sports cars early this morning, Autoblog reported. Museum officials said the hole was discovered when motion sensors activated around 5:45 a.m. The rescue mission can be viewed on the museum's live feed cameras, which weren't working after the sinkhole emerged. A 1993 ZR-1 Spyder and a 2009 ZR1 "Blue Devil," both on loan from General Motors, were among the cars that fell into the sinkhole. The museum owned the other affected Corvettes, which included a 1963 Corvette, a 1984 PPG Pace Car and the 1 millionth Corvette ever produced. The state of the cars at the bottom of the hole isn't known, but trial lawyer and sinkhole expert Ted Corless said the cars may be a total loss for the museum and GM. "Most states, including Kentucky, exclude damage caused by sinkhole activity," he said. "There will be, in all likelihood, a claim made, but a lot of policies would specifically exclude these kinds of damages." Corless has 15 years experience dealing with sinkholes. He said that typically neither the building, nor the cars themselves are protected under their insurance policies. "I would have to say, more likely then not, they're going to have an uninsured loss measured in the hundreds of thousands of dollars." The museum is closed Wednesday while a structural engineer assesses the damage. Related Gallery 2014 Chevrolet Corvette Stingray Test Drive View 9 Photos Related Gallery 2014 Chevrolet Corvette Stingray Test Drive View 9 Photos Weird Car News Chevrolet GM corvette

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.