Used Chevrolet Colorado Crew Cab 4x4 Pickup Trucks 4wd Truck We Finance Autos on 2040-cars

Auto blog

2020 Chevy Trax spied sporting design cues from the new Blazer

We saw spy shots in August for what we thought was either a redesigned Chevrolet Trax or new GMC subcompact crossover. At the time we were leaning Chevy. But after this latest batch of spy shots taken near GM's proving grounds, we're now thinking this one is the Trax replacement and the other one was a GMC. For one, the thin row of LEDs looks remarkably similar to the 2019 Chevy Blazer's LED strip. The additional light slightly below that is similar to the Blazer as well, leading us to believe that the next Trax will have a Blazer-esque front end. At first glance, this vehicle looks slightly larger than today's Trax with a much brawnier shape than the current blob-like design. The rear roof cladding could be hiding the same sloped rear window with spoiler hangover we see on the Blazer. Circling back to the other small GM crossover we caught testing, this one doesn't have those Blazer elements. The curved windshield and sloping roof are like those of the GMC Terrain, as are the horizontal grille bars. By contrast, the above car has a straighter windshield and a roof shaped more like the Blazer. One element that does seem to diverge from the new Blazer are the taillights, but they don't exactly look production-ready anyway. If we're right about this being the next Trax (and we're pretty sure we are) then this looks to be a more distinctive vehicle than what it will replace. The mirrors have left their awkward spot on the doors, and it's shaping up to be a much sportier looking crossover as a whole. This vehicle will most likely end up being a 2020 model year car, and if so, we would expect to see undisguised photos of both it and the assumed GMC version next year. Related Video: Featured Gallery 2020 Chevrolet Trax spy shots Spy Photos Chevrolet GMC Crossover SUV Future Vehicles chevy trax

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

2014 Chevy Cruze Diesel destined for Chicago debut

It's been a little over a year and a half since General Motors first confirmed plans to offer a diesel-powered Chevrolet Cruze here in the United States, and we've now learned that the oil-burning compact will debut under the lights of the Chicago Auto Show in February. According to GM Authority, the Cruze Eco-D will be introduced as part of the entire 2014 model year Cruze range, set to go on sale in the second quarter of this year.
Earlier reports have indicated that the diesel Cruze will be able to achieve fuel economy numbers in the range of 50 miles per gallon. For comparison, the similarly sized Volkswagen Jetta TDI is rated at 30/42 mpg city/highway, but as we found out in our long-term test of the 2011 model, hitting 50 mpg was a piece of cake.
Official specifications will be released at the time of the 2014 Cruze's unveiling, though reports have stated that the sedan will be powered by a reworked version of the 2.0-liter turbo-diesel inline-four found in the Holden Cruze CDX overseas. In that application, the four-pot oil-burner produces 160 horsepower and 265 pound-feet of torque - increases of 20 hp and 29 lb-ft over the 2.0-liter engine used in VW's Jetta TDI.