1970 Chevy Chevelle Malibu Convertible on 2040-cars

Auto blog

GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch

According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.

GM recalling 686k Lambda-platform models for hatch repair

General Motors is recalling 686,287 units of its Lambda platform crossovers. On models equipped with a power rear hatch the system can potentially fail. This campaign includes the 2008-2012 Buick Enclave, 2009-2012 Chevrolet Traverse, 2007-2012 GMC Acadia, and 2007-2010 Saturn Outlook. According to GM's documents to the National Highway Traffic Safety Administration (as a PDF), dirt can get into a portion of the strut that holds up the hatch and cause the part to prematurely fail. There's a redundancy in place called the Prop Rod Recovery system that's designed to shut the liftgate if there's a malfunction. However, if the breakdown happens too quickly after the hatch is opened the prop rod might not work the way it's supposed to. If someone were in the way of the falling liftgate, they could be hurt. For the repair, dealers will update the software for the power liftgate actuator motor control unit to prevent the hatch from closing so quickly. They'll also check the operation of the system afterward. Related Video: RECALL Subject : Liftgate Struts may Fail and Liftgate may Fall Report Receipt Date: JUN 30, 2015 NHTSA Campaign Number: 15V415000 Component(s): STRUCTURE Potential Number of Units Affected: 686,287 All Products Associated with this Recall Vehicle Make Model Model Year(s) BUICK ENCLAVE 2008-2012 CHEVROLET TRAVERSE 2009-2012 GMC ACADIA 2007-2012 SATURN OUTLOOK 2007-2010 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2008-2012 Buick Enclave vehicles manufactured January 3, 2007, to February 29, 2012, 2009-2012 Chevrolet Traverse vehicles manufactured July 6, 2008, to February 29, 2012, 2007-2012 GMC Acadia vehicles manufactured September 15, 2006, to February 29, 2012, and 2007-2010 Saturn Outlook vehicles manufactured August 17, 2006, to March 18, 2010. The affected vehicles, equipped with the power liftgate option, have gas struts that hold the power liftgate up when open. These struts may prematurely wear and the open liftgate may suddenly fall. CONSEQUENCE: If the open liftgate unexpectedly falls, it may strike a person, increasing their risk of injury. REMEDY: GM will notify owners, and dealers will update the software for the power liftgate actuator motor control unit so that the motor will prevent the rapid closing of the lift gate, free of charge. The manufacturer has not yet provided a notification schedule.

Chevy Colorado gets box delete option designed for upfitters

The Colorado, which marks the return of Chevrolet to the midsize truck segment, is receiving critical praise, and now it's time for the pickup to get to work. At the National Truck Equipment Association Work Truck Show in Indianapolis, IN, Chevy is unveiling a box delete option package for the model that allows businesses to custom tailor the Colorado to their needs. The choice to remove the bed is exclusively available on the Colorado Work Truck trim in the rear-wheel drive, extended cab model with a 305-horsepower, 3.6-liter V6 and six-speed automatic gearbox, and Chevy claims this is the only option of its type in the segment. Beyond the obvious loss of the rear, these trucks feature eight mounting points on the frame for upfitters to install any necessary modifications. They also get the Z82 trailering package and a locking differential. The versions with the box delete package carry a payload rating of 2,200 pounds an a gross vehicle weight rating of 6,001 pounds. "It's ideal for utility companies requiring service bodies, as well as landscapers and other businesses needing the utility of a flatbed," Ed Peper, US Vice President for General Motors Fleet and Commerical, said in the option's announcement. Further options with the package are limited to choosing a repositioned fuel filler for the upfitter to install and deleting the rear seat for extra interior capacity. The box delete becomes available in mid-April, and buyers get a $300 credit off the price of the Colorado when it's selected. Colorado 'Box Delete' Expands Options for Businesses Chevrolet package offers unique midsize pickup platform for alternative uses 2015-03-04 INDIANAPOLIS – With a box delete option, business owners and fleet managers can have it their way when it comes to customizing the back end of the 2015 Chevrolet Colorado. Chevrolet today announced availability of the package in mid-April. It is on display this week at the annual National Truck Equipment Association Work Truck Show in Indianapolis. It is the only such option offered in the midsize truck segment. "With the segment-leading efficiency and maneuverable size, the Colorado makes a great, flexible choice for urban businesses and fleets to make the most of a midsize truck," said Ed Peper, U.S. vice president, GM Fleet & Commercial.