One Owner 1969 Camaro Barn Find Project on 2040-cars
Youngstown, Ohio, United States
|
PLEASE READ BEFORE BIDDING, THIS CAR DOES NOT RUN, PLEASE READ, RELISTING DO TO BUYER NOT READING AD AND WAISTED 2 WEEKS OF MY TIME AND MONEY. One owner car. Has not been registered since 1989. Have the original window sticker, invoice, protecet-o-plate, owners manual and maintinence receipts. Was purchased Jan. 22 1969 from Luyster Motors in Glen Cove New York. The car cost $3126.37. It began as a 6 cyl 3 speed standard. Fathom Green Paint w Midnight Green interior. The car now has a 1971 307 2 bbl. with a powerglide. The Motor is installed but needs finished, needs exhaust gaskets and exhaust, carb needs rebuilt, fuel pump installed, starter, wires.... It comes w a 4 speed trans, clutch pedal assembly, shifter, extra carbs and fuel pump. New quarters, outer wheel wells and trunk drop offs were installed. Doors, fenders and rest of car is original sheet metal. Floors have been patched. Shock towers are very solid. Can use a radiator support , new one included. Only one bad spot on the frame and that has been fixed. All glass and interior is intact. 15 x 7 Ralley Wheels. The car is not perfect but is a good start for restoration. If you have any questions you can call me 330-518-3708 Mike. The car is located in Youngstown, Ohio 44515 if you want to inspect the car before bidding. Thank you for looking at my ad. Happy Bidding!!!!
|
Chevrolet Camaro for Sale
We finance! 2354 miles 2013 chevrolet camaro ss premium 6.2l v8 16v onstar
1967 chevrolet camaro base hardtop 2-door 5.3l possible project(US $13,000.00)
We finance! 3713 miles 2013 chevrolet camaro lt 3.6l v6 24v onstar
Iroc z very nice car(US $6,800.00)
We finance! 292 miles 2012 chevrolet camaro 1ss 6.2l v8 16v onstar premium
1988 iroc z28 camaro convertible(US $9,500.00)
Auto Services in Ohio
Zink`s Body Shop ★★★★★
XTOWN PERFORMANCE ★★★★★
Wooster Auto Service ★★★★★
Walker Toyota Scion Mitsubishi Powersports ★★★★★
V&S Auto Service ★★★★★
True Quality Collision ★★★★★
Auto blog
GM pickup truck plant in Flint to add 1,000 assembly workers
Tue, Feb 5 2019FLINT, Mich. — General Motors said Tuesday it will add 1,000 workers to build new heavy-duty pickup trucks at its plant in Flint, Michigan, and will give priority to GM workers who were laid off elsewhere. The announcement comes the day after GM said it was starting to hand pink slips to about 4,000 salaried workers in the latest round of a restructuring announced in late November that will ultimately shrink its white-collar workforce in North America by 15 percent out of 54,000. GM has come under fire from U.S. President Donald Trump and Midwestern lawmakers for its plans to stop production at five North American factories and cut up to 15,000 jobs in all. The automaker has said it is trying to find new jobs for 1,500 U.S. hourly workers at the affected plants. Flint's truck plant could be a haven for many of these employees. Sales of heavy-duty pickups in the United States have grown to more than 600,000 vehicles a year, up more than 20 percent since 2013, according to industry data. Prices for luxury models can easily top $70,000. GM on Tuesday will celebrate the launch of a new generation of heavy-duty GMC and Chevrolet pickups at the assembly plant in Flint, Michigan, that is now building all such trucks for the company. Elsewhere in the company on Monday, two people briefed on the cuts in the white-collar salaried workforce said GM is cutting hundreds of jobs at its information technology centers in Texas, Georgia, Arizona and Michigan and more than 1,000 jobs at its Warren, Michigan Tech Center. GM is filing new required mass layoff notices with state agencies and disclosed the cuts to lawmakers. The largest U.S. automaker announced in November it would cut a total of about 15,000 jobs and end production at five North American plants. The cuts include eliminating about 8,000 salaried workers, or about 15 percent. GM cut about 1,500 contract workers in December and said 2,300 salaried workers accepted buyouts, officials said. "These actions are necessary to secure the future of the company, including preserving thousands of jobs in the U.S. and globally. We are taking action now while the overall economy and job market are strong, increasing the ability of impacted employees to continue to advance in their careers, should they choose to do so," GM spokesman Pat Morrissey said, adding the bulk of the cuts should be completed in the next two weeks. Morrissey said GM would provide salaried workers with severance packages and job placement services.
Diesel-powered 2020 Chevrolet Silverado, GMC Sierra get big price cuts
Tue, Sep 8 2020General Motors is reducing the price difference between its diesel-powered light-duty pickups and their gasoline-burning counterparts, according to a recent report. As of September 3, 2020, the Chevrolet Silverado 1500 and the GMC Sierra 1500 benefit from a $1,500 price cut when they're ordered with a turbodiesel under the hood. Enthusiast website GM Authority first reported the news after looking at internal documents sent to dealers across the nation. It wrote the discount applies to in-stock and in-transit units of the Silverado and the Sierra (pictured), and it added dealers will begin receiving amended window stickers on September 8. And, it's not just a quick, easy way for General Motors stores to clear out 2020 inventory. Incoming 2021 models will benefit from it, too. Chevrolet's cheapest diesel-slurping 2020 Silverado, a double-cab LT with two-wheel drive, now starts at $44,000 once a mandatory $1,595 destination charge enters the equation. For context, the same configuration costs $38,795 including destination when it's ordered with the 2.7-liter turbocharged four-cylinder, which is the smallest and cheapest engine on the roster. Selecting the more efficient engine option costs buyers $5,205. At the other end of the spectrum, the crew-cab High Country with a standard cargo box and four-wheel drive is now priced at $59,690. Walk a block to the GMC store, and you'll need to spend between $44,470 (double-cab SLE with two-wheel drive) and $61,685 (crew-cab Denali with a regular cargo box and four-wheel drive) for a diesel-powered Sierra. It doesn't sound like either company is making major mechanical changes to the trucks for 2021. Both are powered by a 3.0-liter straight-six Duramax engine, which makes 277 horsepower and 460 pound-feet of torque. Rear-wheel drive and a 10-speed automatic transmission come standard, and four-wheel drive is offered at an extra cost. In its most efficient configuration, the Silverado returns 23 mpg in the city, 33 mpg on the highway, and 27 mpg in a mixed cycle, impressive numbers for a body-on-frmae pickup that's as heavy as it is capable. Ram's diesel-powered 1500 posts EPA estimates of 22, 32, and 26, respectively. Ford pledged the recently-unveiled 14th-generation F-150 will offer a turbodiesel engine, too, but its fuel economy figures are not available yet.
GMC Envoy could be returning as GM files for 'Envoy' trademark
Thu, Dec 27 2018The GMC Envoy could be on its way back, if a recent GM trademark filing is any indication of the future. To be exact, GM's trademark filing is for the name "Envoy," and is applicable to "motor vehicles, namely, sport utility vehicles, engines therefor and structural parts thereof." A victim of the recession and high gas prices, the original Envoy – related to the Blazer, and more recently the TrailBlazer and similar GM SUVs – was discontinued after the 2009 model year. In today's SUV-happy market of low gas prices, unearthing the somewhat familiar Envoy name makes a certain amount of sense. As soon as gas prices start trending in the other direction, we'll all be saying the opposite, though. What this SUV will take shape as is the big question now. With the Chevrolet Blazer well and truly on its way, there's every reason for a GMC version of Chevy's stylish new crossover sporting the Envoy name. Another, less likely, possibility is a Traverse-sized vehicle to slot between the shorter Acadia (10 inches shorter than the Chevy Traverse) and the body-on-frame Yukon. GM could come out of left field and make the Envoy a Buick too. It fits the bill with the "En" beginning, and Buick undoubtedly has crossovers in the works. We think that's even more unlikely, but it's important to remember that we're still in the speculation phase. Soon we'll drive Chevy's new Blazer, and perhaps have more news then. Check in next week for that. Related video:















