2014 Chevrolet Camaro Lt on 2040-cars

Auto blog

GM recalls 83,572 SUVs for ignition switch issue

General Motors is recalling 83,572 SUVs from the 2011 and 2012 model years over a potential ignition lock actuator issue. In affected vehicles, the actuator isn't the right size, which could cause the ignition to get stuck in the "Start" position, and then either due to a jarring event or a "cool interior temperature" the ignition could switch back to the "Accessory" position. Doing so would cause a loss of power assistance and the airbags might not deploy. This is a different ignition issue than the one that's been ongoing for the past year. GM said it expects that less than 500 vehicles suffer from the problem, but that the pool could include vehicles from 2007 through to 2014 that have already been fixed, but with defective parts. The 2011-2012 SUVs included in the National Highway Traffic Safety Administration notice: Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado HD, Silverado LD, Suburban, Tahoe, GMC Sierra LD, Sierra HD, Yukon, and Yukon XL vehicles. GM will notify owners and dealers will inspect the ignition lock housing to see if it needs a free replacement. RECALL Subject : Ignition Lock Actuator may Bind Report Receipt Date: DEC 30, 2014 NHTSA Campaign Number: 14V827000 Component(s): ELECTRICAL SYSTEM Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2011-2012 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado HD, Silverado LD, Suburban, Tahoe, GMC Sierra LD, Sierra HD, Yukon, and Yukon XL vehicles. In the affected vehicles, the ignition lock actuator may bind, making turning the key difficult or causing the ignition to get stuck in the "Start" position. CONSEQUENCE: If stuck in the "Start" position, the ignition may suddenly snap back into the "Accessory" position, causing a loss of engine, steering, and braking power, increasing the risk of a vehicle crash. If the vehicle is in a crash, the air bags may not deploy, increasing the risk of occupant injury. REMEDY: GM will notify owners, and dealers will inspect and replace the ignition lock housing, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact GM customer service at 1-800-458-8006 (Cadillac), 1-800-222-1020 (Chevrolet), or 1-800-462-8782 (GMC). GM's number for this recall is 14696 for the original equipment, and 14912 for the service replacement parts.

Weekly Recap: BMW rolls out ambitious plug-in hybrid electric plan

"We believe that for the United States, this is going to be very important." – Julian Arguelles Let there be no doubt, BMW is serious about electric vehicles. The German automaker said this week it will make plug-in hybrid versions of all of its core models, an aggressive move that demonstrates its commitment to electric propulsion systems. BMW did not specify which vehicles will get the plug-in systems or provide a timeline for when they will arrive. But the announcement is clearly more than blustering, and the company revealed a 3 Series plug-in prototype this week at an event in France. BMW said the 3 Series uses a version of its 2.0-liter turbocharged four-cylinder engine (240 horsepower, 300 pound feet of torque) with an electric motor sandwiched between the engine and transmission in place of the torque converter. It has an all-electric range of 22 miles. A plug-in X5 with the same powertrain was also displayed alongside the 3 Series, though the X5 has been on the auto-show circuit for more than a year, including a recent stop in Los Angeles. Those two vehicles use "eDrive," and BMW's plans represent the first widespread transfer of its technology from development of the i3 and i8 models to more mainstream products. BMW said it's developing electric powertrains so they can be deployed rapidly across its range, and they are flexible enough to be used with fuel cells in future products. Enticingly, BMW is also working on a "Power eDrive" system, which debuted in a 5 Series GT concept at the event in France. This setup has two electric motors powered by a 20-kilowatt-hour battery pack, and when teamed with a four-cylinder turbo, pump out about 670 hp. Reinforcing BMW's commitment, the company will add more than 200 jobs at its factory in Dingolfing, Germany, to support electric-vehicle development. The moves come as BMW and other automakers diversify their portfolios while fuel economy and emissions regulations are getting tighter around the world. The United States has set a 54.5-mpg CAFE requirement for the 2025 model year. BMW said the electric vehicles were developed with an eye toward the US market, its government policies and its wide-ranging commuting styles. "We believe that for the United States, this is going to be very important," spokesman Julian Arguelles said. Ben Scott, a senior analyst in London with automotive research firm IHS, said BMW's moves are expensive – but necessary – to keep pace with the market.

Star Wars Car Drives To The Dark Side Of Comic Con

When it comes to designing coveted collectible toys for sale at Comic-Con, the annual celebration of pop culture lifting off Thursday in San Diego, the sky's the limit for the designers at Mattel. Fittingly, the building where Mattel's dreamers conceive of their limited-edition playthings is just down the street from the Los Angeles International Airport. Inside the colorful design center - a Hot Wheels-themed shuttle bus transports employees from Mattel's parking garage - the designers have spent the past year working on 10 toys created especially for the Comic-Con crowd, including a replica of the Batmobile from the upcoming game "Batman: Arkham Knight" and a 9-inch-tall action figure of Superman killer Doomsday. "We don't have to worry about retail. We don't have to worry about margins," said Doug Wadleigh, Mattel's senior vice president of global brand marketing for boys and entertainment. "We don't have to worry about operational efficiencies. We only have to worry about creating the coolest toys for our fans. Period." It also offers some escape from Mattel's reality these days. Like other toy makers struggling in this digital, video-centric age, the company is trying to remain relevant in the retail world. Core brands like Barbie have seen less of a demand, with a 14 percent drop in sales in the first quarter of this year. Mattel had a net loss for the first three months ending March 31 that totaled $11.2 million. But things will at least seem rosier at Comic-Con, where eager buyers for the toys await (the only other place they will be sold is on the Mattel collector's site). Mattel's exclusives this year run between $20 and $85, but elite toys can fetch much more when they're put up for auction. The crown jewel for Wadleigh and his team this year is a Darth Vader die-cast car, the first official collaboration from Hot Wheels and the "Star Wars" franchise. The car - imagine if a Chevrolet Corvette C5 and the villainous Sith lord's helmet had a baby - comes in a sleek black box and encased in a replica of Vader's lightsaber, complete with a swooshing sound effect. "We've been trying to partner with Lucasfilm and Disney on this property for a long time," said Wadleigh. A full-size working replica of the Vadermobile will be on display at Mattel's booth at the massive San Diego Convention Center.