1985 Camaro Z28 on 2040-cars

Auto blog

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

This is your 2014 Chevrolet SS

Think you've waited long enough for this? If so, then you'll want to savor the high-res photos we've so far been given of the 2014 Chevrolet SS, the first rear-wheel-drive performance sedan from The Bowtie in 17 years.
We all know its our version of the brand new VF-model Holden Commodore, but what's under the hood that earns the appellation "performance?" A 6.2-liter LS3 V8 engine producing 415 horsepower and 415 pound-feet of torque. That's 35 hp and lb-ft less than the same engine is expected to produce in the 2014 Chevrolet Corvette. Chevrolet says the sedan will get from 0-to-60 miles per hour "in about five seconds."
Shifting comes courtesy of a six-speed automatic with paddles on the steering wheel, while stopping arrive via four-piston Brembo calipers up front, a single sliding piston in back. The forged aluminum wheels are 19-inchers all around, each set supporting right around 50 percent of the sedan's weight, and the aluminum hood and trunk are meant to keep the center of gravity low.

Recharge Wrap-up: NEDC's NOx problems, autonomous Chevy Volts

The International Council on Clean Transportation (ICCT) found a significant difference in NOx emissions in Euro 6 diesel cars in NEDC and WLTC testing. While 88 percent of the cars tested met emissions standards for NEDC, NOx emissions averaged five times higher under WLTC, with only 27 percent of vehicles under the limit. WLTC is considered to be a more realistic driving cycle, using hot starts and factoring a higher top speed as well as harder and more frequent accelerations than the NEDC. Read more at Green Car Congress.GM Canada will build a fleet of autonomous 2017 Chevrolet Volts. The self-driving Volts will be deployed for testing at GM's Warren, Michigan Technical Center. Employees will be able to use a carsharing app to reserve a car, which will then drive itself to the set destination. The project will allow GM to collect important data and experience to help the company more quickly develop autonomous driving technology. Read in a press release more from GM Canada, or at Green Car Congress.Carwatt is showing an electric Renault Trafic powered by second-life batteries at the COP21 environmental summit in Paris. The lithium-ion batteries used to power the EV were recycled from other Renault EVs. With the electric Trafic, Carwatt – a company that converts vehicles to use electric power – aims to demonstrate the "circular economy" of batteries, which can provide more value through a longer lifecycle. Read more in the press release below. Carwatt presents a unique automotive application for second-life batteries from electric vehicles. On the sidelines of the COP21 summit, in the Solutions Gallery running from 2 to 9 December 2015 in Le Bourget near Paris, Carwatt and its partners —Renault, Paris City Council, BPI France, the Ales Ecole des Mines Engineering School, and the Bobigny Business Campus — are showing a very special electric Renault Trafic. This prototype vehicle, the only one of kind in the world, is powered by second-life lithium-ion batteries recycled from Renault electric cars. Circular economy at work with electric vehicles When, over time, the batteries of a Renault electric vehicle fall the performance threshold specified for their initial automotive power duty (around 75% of initial capacity), they can still provide valuable service in "second-life" applications before end-of-life disposal at a recycling centre. Experiments are already under way on power storage applications, for example.