1969 Chevrolet Camaro Ss 396 L78 W/ Muncie M22 on 2040-cars

Auto blog

Best cars for snow and ice in 2023 and 2024

What's the best car for snow? The real answer is "the one with winter tires." What do we mean by that? You could have the finest, most advanced all-wheel-drive system or four-wheel drive in the world, but if you're running all-seasons (the spork of tires), your fancy four-wheeler won't matter much. The odds are, any vehicle on the road running good winter tires will probably perform adequately in slippery, slushy and/or snowy road conditions. (Here's a more complete explanation of why winter tires are totally worth it). In other words, you don't really need any of the cars on this list. With a set of winter tires, countless others will do the job, and even these will be at their best with proper rubber. You can find a variety of winter tires for your car here at Tire Rack. Keep in mind that you will need a full set of four snow tires for safety and performance, no matter what you're driving. The days of your dad putting just two snows on the family truckster to get it moving in a straight line are long gone. Don't get us wrong, getting a car that performs well in snow and ice is still a worthy criteria for car buyers. According to the U.S. Transportation Department, 70% of Americans live in places that get snow and ice. And much of the country has been blasted with arctic air for much of the new year. So let's look at the cars. First, we're highlighting choices for a variety of buyers and price points. Second, we're not just considering snow; we're considering general wintery conditions people will experience driving to work or school. As such, these are all choices with advanced all-wheel-drive systems, usually with "torque-vectoring" systems that not only automatically shunt power front and back, but side to side between the rear axles. Most have extra ground clearance for getting through deep snow, and we prefer those vehicles with more responsive steering, throttles and transmissions that provide a greater sense of vehicle control in slippery conditions.    Acura RDX Read our Acura RDX Review Acura's Super-Handling All-Wheel Drive system was one of the first to offer torque-vectoring, and besides often being touted for its ability to greatly enhanced dry-road handling, its benefits in the slick stuff can be profound. It's actually surprising that Acura hasn't leaned into this capability further by offering more rugged versions of its vehicles.

Camaro spy shots show subtly different grille, front fascia

It looks like there some changes in store for the Chevrolet Camaro - the only thing is that we just don't know what Chevy has up its sleeve. Looking at these spy shots, we'd initially be inclined to think that there is just a minor facelift or a new special edition, but upon closer inspection, there are a few oddities about this car that definitely have us intrigued.
The most obvious difference on this prototype is the slightly restyled front fascia with a smaller lower air inlet and the two-bar grille. Then we get to some of the car's mysterious details. For starters, this fascia has the SS vent above the grille, but it looks to be blocked off. Granted this could just be a one-off piece used for testing. What really piqued our interest was at the rear of the car where it has quad exhaust outlets that are used on the ZL1. Could this be the LS7-powered Camaro that we reported on back in December?
At this point, your guess is as good as ours as to what we're looking at here, so let us know in the comments what you think this could be.

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado