1968 Camaro on 2040-cars

Auto blog

Audi S4 drivers are the most accident-prone, insurance report says

Culling data from more than 4.6 million automobile insurance applications, researchers at the Insurify insurance comparison marketplace picked a winner — or more to the point, a loser — in its determination of the car model with the most accidents so far in 2023: the Audi S4. Why does the sporty, luxury-class German sedan rank so high (or so low)? The organization found that S4 drivers, piloting a car with almost 350 horsepower, are among those who collect the most speeding tickets, and that they get into accidents at a rate 54 percent higher than the national average. If the S4 isnÂ’t a surprise with an at-fault accident rate of 11.7 percent, consider the “family friendly” brand that appears three times on the Insurity list: Subaru. It is represented by three models, including the turbocharged WRX and XV Crosstrek, and at the better-performing bottom of the list, the Subaru Impreza, with an accident rate of 10.3 percent.  In 2023, 7.6 percent of U.S. drivers were involved in at least one at-fault accident in the prior seven years. For drivers of cars on this list, the average at-fault accident rate was 10.5 percent, meaning these drivers are 1.4 times as likely to have an at-fault accident on record. According to its statement, the Insurity data science team explored key safety features, driver behavior, and Insurance Institute for Highway Safety (IIHS) evaluations to pinpoint possible reasons behind these carsÂ’ high accident rates. Following is the list, counting down to the models with most reported accidents: 10. Subaru Impreza (percentage of drivers with a prior at-fault accident on record: 10.3 percent; MSRP base model): $19,795) 9. Kia Niro (percentage of drivers with a prior at-fault accident on record: 10.4 percent; MSRP base model): $26,590) 8. Chevrolet Silverado LD (percentage of drivers with a prior at-fault accident on record: 10.4%, MSRP base model): $34,500) 7. Subaru XV Crosstrek (percentage of drivers with a prior at-fault accident on record: 10.5 percent, MSRP 6. Subaru WRX.(percentage of drivers with a prior at-fault accident on record: 10.7% MSRP base model): $29,605) 5. Toyota GR86 (percentage of drivers with a prior at-fault accident on record: 10.8 percent MSRP base model): $29,900) 4. Hyundai Veloster N (percentage of drivers with a prior at-fault accident on record: 10.9 percent; MSRP base model): $32,500) 3.

2014 Chevrolet Corvette Stingray Convertible gives us a couple of looks

Put away your pixel paintbrushes, kids. Pack up your Photoshop. This is the real-deal 2014 Chevrolet Corvette Stingray Convertible in its first official images. The droptop Chevrolet will roll into the bright lights of the Palexpo exhibition at next week's Geneva Motor Show, a four-wheeled statement of intent that General Motors is serious about taking its Corvette franchise global.
Chevy isn't providing anything in the way of further details with these two shots, but we've learned at least a couple of things about the car shown here. First off, the example seen in these images is fitted with the optional Z51 Performance Package - something that isn't immediately evident because there's no sign of the coupe model's prominent ductwork on its rear haunches. In order to accommodate the power folding hard tonneau cover, the vents that feed the transmission and differential coolers have been relocated to the underside of the car. The dark paint color on this example also does a good job of muting the contrasting black front fender vents and hood opening - Z51-spec design details that have proven to be somewhat controversial.
One other thing to note: These two shots also display the Stingray wearing different alloy wheels than the split five-spoke design shown at the hardtop's Detroit Auto Show unveiling in January. The simpler, thin five-spoke wheels should do a good job of showing off the Z51's upgraded brakes, and they'll be optional on the coupe as well.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.