on 2040-cars

Auto blog

Next-generation GMC Canyon, Chevy Colorado spied together

With the debut of the next-generation GMC Canyon coming in a couple of months (in off-road-ready AT4 guise no less), it's no surprise that both it and the Chevy Colorado are out testing without the heavy coverings of early prototypes. One of our spy photographers caught examples of both trucks with close-fitting vinyl wraps. This gives us a great opportunity to see each pickup more clearly, but also to compare and contrast the designs. From the front, the GMC features a narrower, but seemingly taller grille. At the top are slender lamps. They seem to be daytime running lights, though, and below them are much larger units that will function as the actual headlights. The prototype shown seems to be one of the AT4 variants, based on the lack of a lower air dam and the opened up corners of each bumper. Small fog lights show up in the lower bumper, too. As for the Chevy, its grille is wider, and it blends into the headlights. The lights are at the top of the grille, and they seem to incorporate the actual headlights, not just running lamps. The grille mesh has some interesting detailing, and there are auxiliary lights below the main headlights. This one seems to be a more mainstream Colorado model since it still has a front air dam, possibly a Z71 model, considering the chunky tires. Not surprisingly, the two trucks are very similar from the sides and the rear. They have cabins that look lower, longer and more squared-off than the current models. The fenders look more punched out and aggressive, too. The main differentiator between the Chevy and GMC are the wheel openings. The GMC has sharp corners and the Chevy has more rounded ones, as is the case with the full-size trucks. As previously mentioned, the GMC Canyon AT4 will be revealed this summer, so likely in just a month or two. The Colorado will likely be revealed this summer, too. It's expected that it will use the turbocharged 2.7-liter four-cylinder shared with the Silverado. Naturally, it will be available with two- and four-wheel drive and a variety of trim levels including the AT4 and ZR2 off-road versions. Related video:

Driving Granatelli's turbine-powered 1978 Chevy Corvette [w/video]

With its curvy snout and feminine haunches, the third-gen Chevrolet Corvette looks like a dreamy – if dated – exemplar of Sports Car Fantasy 101 when viewed through modern eyes. This particular specimen circa '78, clad in silver and black paint with red pinstripes, appears to be a well-preserved example from the era. Apart from its low-profile Pirellis, slightly raised and slotted hood, spacious stance and a certain hand-painted descriptor alongside its crossed flag logos, you'd never guess there's a Space-Age propulsion unit powering this Coke bottle-bodied ride. Climb inside, and you're presented with aircraft gauges and big, colorful square buttons in the center panel. It takes a push of the "Ignitor" button, a tap of the starter button, and a slide of a T-handle for this nearly 40-year-old sports car to start sounding like Gulfstream G650 ready for takeoff. Yep, you're sitting in an 880-horsepower, turbine-powered Corvette, the only one of its kind in the world. Welcome to the whoosh. What The...? Built by Vince Granatelli, son of Indy 500 guru Andy Granatelli, this curious Corvette came into being by cramming a Pratt & Whitney ST6N-74 gas turbine engine into the donor car's lengthy front end. The same type of Jet A-burning mill powered Granatelli Senior's STP-sponsored racecar at the 1967 Indianapolis 500, where it famously led most of the 198 of 200 laps until a $6 transmission bearing failed, knocking it out of the race. The idea of turbine power usurping internal combustion was so threatening that Indy's governing body restricted turbine performance into obsolescence thereafter. A turbine-powered Corvette sounds excessive because it is. But there are also things about this 880-horsepower, 1,161-pound-feet monster that might surprise you. While it smacks of futurist exoticism and cost a then-dizzying $37,000 in 1967, the Canadian-built powerplant uses 80 percent fewer parts than an internal combustion V8 and will run on virtually anything combustible – whiskey, diesel, even Chanel No. 5. Though it's triple the length of a V8, the Pratt & Whitney beast weighs only 285 pounds. It's also one hell of a robust workhorse, typically serving as an auxiliary power unit for commercial aircraft or a generator in oil fields, where it can run for tens of thousands of consecutive hours before needing an overhaul. To adapt the Chevrolet for jet duty, the nose section was gutted and a sub-frame was built to compensate for the loosey-goosey front end.

Costco Auto Program adds the Chevy Silverado and GMC Sierra through July

Costco members lean to the Bowtie when it comes to pickups. The big box store wrote that the Chevrolet Silverado "is currently the most requested Chevrolet and pickup truck through Costco Auto Program and has been for the past 11 years. In the 14 years Costco has partnered with Chevrolet for member-only incentives, the Silverado (when included), has been the top selling vehicle every time." Members can rejoice, because just for the months of June and July, the Costco Auto Program has added the Silverado and the GMC Sierra to its Costco Auto Savings Event. Until July 31, 2024, card-carrying shoppers can get an additional $1,000 discount on top of any manufacturer incentives they qualify for when leasing or purchasing new examples of either. The Auto Savings event includes other vehicles as well, the $1,000 incentive applicable to certain other models from Chevy and GMC, as as well Volvo and Cadillac. Tire kickers considering the Polestar 2 can get $2,000 off.  You can check out our write-up on the Costco Auto Program for all the details and the frequently asked questions. The summary is that the store works with "selected" dealers to refer customers to, about 3,000 storefronts across most automotive brands. The program comes with no-haggle pricing for any straight-up purchase. Costco offers customers a research tool to check out vehicles by type and compare specs and features. After a customer zeroes in on a car, it's time to visit the dealership for a chat with an "Authorized Dealer Contact" to examine the vehicle and go over the fine print. Haggling would only arise if the customer has a trade-in; that valuation is between the customer and the dealer. The customer can check out the Costco Member-Only Price Sheet, which "displays your prearranged pricing. The savings can be displayed in one of two ways: One version lists pricing for all models available at the participating dealership; the other will show a VIN-specific price based on the vehicle you select, including any applicable manufacturer incentives or rebates." And for those looking on the battery-powered shelves, the program offers the same $1,000 off the Chevy Blazer EV and Equinox EV.