One Owner!, All Original! 1968 Chevy C20 Camper Special. Rust Free, Xln Shape! on 2040-cars

Auto blog

Weekly Recap: BMW rolls out ambitious plug-in hybrid electric plan

"We believe that for the United States, this is going to be very important." – Julian Arguelles Let there be no doubt, BMW is serious about electric vehicles. The German automaker said this week it will make plug-in hybrid versions of all of its core models, an aggressive move that demonstrates its commitment to electric propulsion systems. BMW did not specify which vehicles will get the plug-in systems or provide a timeline for when they will arrive. But the announcement is clearly more than blustering, and the company revealed a 3 Series plug-in prototype this week at an event in France. BMW said the 3 Series uses a version of its 2.0-liter turbocharged four-cylinder engine (240 horsepower, 300 pound feet of torque) with an electric motor sandwiched between the engine and transmission in place of the torque converter. It has an all-electric range of 22 miles. A plug-in X5 with the same powertrain was also displayed alongside the 3 Series, though the X5 has been on the auto-show circuit for more than a year, including a recent stop in Los Angeles. Those two vehicles use "eDrive," and BMW's plans represent the first widespread transfer of its technology from development of the i3 and i8 models to more mainstream products. BMW said it's developing electric powertrains so they can be deployed rapidly across its range, and they are flexible enough to be used with fuel cells in future products. Enticingly, BMW is also working on a "Power eDrive" system, which debuted in a 5 Series GT concept at the event in France. This setup has two electric motors powered by a 20-kilowatt-hour battery pack, and when teamed with a four-cylinder turbo, pump out about 670 hp. Reinforcing BMW's commitment, the company will add more than 200 jobs at its factory in Dingolfing, Germany, to support electric-vehicle development. The moves come as BMW and other automakers diversify their portfolios while fuel economy and emissions regulations are getting tighter around the world. The United States has set a 54.5-mpg CAFE requirement for the 2025 model year. BMW said the electric vehicles were developed with an eye toward the US market, its government policies and its wide-ranging commuting styles. "We believe that for the United States, this is going to be very important," spokesman Julian Arguelles said. Ben Scott, a senior analyst in London with automotive research firm IHS, said BMW's moves are expensive – but necessary – to keep pace with the market.

Recharge Wrap-up: Phoenix Cars delivers ZEUS to Navy, Volt saves gas compared to i-MiEV

Phoenix Cars has delivered its first Zero Emissions Utility Shuttle (ZEUS) flatbed truck to the US Navy. The electric flatbed will be used to transport maintenance materials around Naval Base Ventura County Port Hueneme. The Phoenix ZEUS features a 100-mile range, and can charge in just three hours. It also features vehicle-to-grid technology and direct power capability, allowing it to function as a mobile power station. ZEUS customers enjoy an eight-year/300,000-mile battery warranty and round-the-clock technical support from Phoenix. Phoenix launched an electric passenger shuttle last year, and years ago worked on an electric sport utility truck before shifting over to larger vehicles. Read more in the press release from Phoenix Cars. A man found that he used less gas by trading in his Mitsubishi i-MiEV for a Chevrolet Volt. Ben Rich saved fuel in part by using his Volt for road trips rather than needing to rent cars. Rich also found other benefits to driving a Volt, including more comfort, more freedom of movement and less range anxiety. Rich often had to turn off the heat in the winter to eke out precious miles in the Mitsubishi, which he needn't do in the Chevy, though he did have a gripe about the Volt using the gas motor to warm the car. Read more at Green Car Reports. EV drivers using the ChargePoint network have traveled over 196 million miles without gasoline. ChargePoint has tallied over 9 million charging sessions for a total of 65 gigawatt hours of energy. Based on national efficiency averages of three miles per kWh and 23.9 miles per gallon, this has saved 8.2 million gallons of gasoline and 60 million pounds of CO2. This accounts for what ChargePoint calls a "huge environmental impact." Read more in the release from ChargePoint below. The Environmental Impact of ChargePoint Drivers Campbell, Calif.– We all know electric vehicles (EV) have enormous environmental advantages over gas vehicles. Plug-in EVs reduce carbon-based greenhouse gases, improve air quality and reduce our dependence on fossil fuels. EV drivers on the ChargePoint network have had a huge environmental impact. With over 9 million charging sessions delivering 65 gigawatt hours of energy, EV drivers have avoided over 60 million pounds of CO2 and 8.2 million gallons of gasoline, and driven over 196 million gas-free miles. *Based on national averages: EV efficiency of 3 miles per kWh, gas efficiency of 23.9 mpg and a net savings of 0.924 pounds of CO2 per kWh.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging