1992 Chevrolet K1500 Silverado Extended Cab Pickup 2-door 5.7l on 2040-cars

Auto blog

2021 Chevy Colorado and GMC Canyon facelift spied

The Chevy Colorado and its GMC Canyon twin have been on sale for a good long time now, and while things move a little more slowly on the truck side when it comes to facelifts and model changeovers, it seems like it’s about time. So itÂ’s no surprise to see some lightly camouflaged trucks running around ahead of what appears to be a minor refresh for the 2021 model year. Starting with the Colorado, it appears to have a bowtie hiding behind some camo in the center of the grille, which otherwise looks like the no-bowtie option you can get on 2019-and-up trucks. It could be that Chevy is keeping the no-bowtie grille design but allowing a bowtie to grace it, or it could be misdirection. Either way, the grille pattern adds a bit of flair to the otherwise staid front end design. There also appears to be a bit more shape to the lower air inlet, with echoes of some of the lower fascias of its bigger Silverado stablemate. The Canyon, on the other hand, shows more extensive front-end changes. At first glance, it looks to emulate some variants of the GMC Sierra, which would make sense given those modelsÂ’ changes for the 2020 model year. In particular, this Canyon has hints of Sierra HD, being more square and monolithic than the regular Sierra 1500s, although itÂ’s a little hard to tell with the camo covering the edges of the grille. It could certainly also adopt more rounded corners like the 1500s. Either way, itÂ’s more vertical and thereÂ’s less differentiation between the upper grille and lower opening. ThereÂ’s nothing in the way of changes around the sides or back, and while there may be some minor changes inside, we arenÂ’t expecting any. The word around town is that this isnÂ’t a full facelift, but rather a minor front end tweak thatÂ’ll just be a regular part of the model-year changeover. 

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

EarthCruiser adds a bigger camper option to its heavy duty pickup line

EarthCruiser is a camper and expedition vehicle company based out of Oregon that we've previously covered for its huge commercial truck-based machines. But they offer more than that, from drop-in campers for smaller pickups to heavy duty pickup conversions. The company's latest product is one of the latter, offering a larger camping area than the current EXD model. This new camper conversion is called the Terranova. The big differentiator between it and the EXD is the camper section, which extends over the truck cab on the Terranova. This means that bed space can be moved to above the truck cab, instead of having to use a convertible dinette. So less reconfiguring, and generally more usable space. One other major difference is that the EXD is only available for the Ram 3500 and Ford F-350. The Terranova is being designed for both of those trucks as well as the Chevy Silverado 3500. The EarthCruiser Terranova is otherwise very similar to other EarthCruiser models. The camper section is made of fiberglass and plastic, and the pop-up roof is insulated with foam. The curtains are triple-layered. The company says it can house four people. It comes with a freshwater tank and pump to help supply the kitchen sink, drinking water tap, bathroom sink and indoor and outdoor showers. There's also a cassette toilet. The kitchen features an induction stove top and small refrigerator and freezer. A fan system is standard, and air conditioning is optional. Power comes from a 400-aH lithium-ion battery. The Terranova isn't yet available. EarthCruiser is finishing up design and engineering, and it plans to have finished examples early next year. The company is taking reservations now, though. Pricing hasn't been announced, but an EXD runs between $220,000 and $265,000, and we would expect the Terranova to cost even more. Related Video: Featured Gallery EarthCruiser Terranova Expedition Camper renderings Chevrolet Ford RAM Truck Off-Road Vehicles Special and Limited Editions RVs/Campers