1977 Chevy K10 4x4 on 2040-cars

Auto blog

Final C6 Corvette built in Bowling Green

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.

Even if GM does close all 5 of those plants, it'll still have too many

DETROIT — General Motors' monumental announcement on Monday that it will close three car assembly plants and two powertrain plants in North America and slash its workforce will only partially close the gap between capacity and demand for the automaker's sedans, according to a Reuters analysis of industry production and capacity data. Sales of traditional passenger cars in North America have been declining for the past six years and are still withering. After GM ends production next year at factories in Michigan, Ohio and Ontario, it will still have four U.S. passenger-car plants — all operating at less than 50 percent of rated capacity, according to figures supplied by LMC Automotive. In comparison, Detroit-based rivals Ford and Fiat Chrysler Automobiles will have one car plant each in North America after 2019. The Detroit Three are facing rapidly dwindling demand for traditional passenger cars from U.S. consumers, many of whom have shifted to crossovers and trucks. Passenger cars accounted for 48 percent of retail light-vehicle sales in the United States in 2014, according to market researchers at J.D. Power and Associates. This year, sedans will account for less than a third of light vehicle sales. That shift in turn has left most North American car plants operating far below their rated capacities, while many SUV and truck plants are running on overtime. The collapse in passenger-car demand is a challenge for nearly all automakers in the United States, including Japan's Toyota and Honda, which have the top-selling models in the compact and midsize car segments. Toyota executives said last month they are evaluating the company's U.S. model lineup. But Toyota also plans to build compact Corolla sedans at a new $1.6 billion factory it is building in Alabama with partner Mazda. The obstacles facing GM in its plans to close more auto factories became apparent on Tuesday as U.S. President Donald Trump threatened to block payment of government electric vehicle subsidies to GM. While it is not certain that Trump unilaterally has the power to do that, he made it clear he intends to use his office to pressure the company to keep open a small car plant in Ohio that GM says will stop building vehicles in March.

Is this '47 Chevrolet a rat rod or a sports car?

These days there are plenty of vehicles that blur the conventional automotive class structures. For instance, was the Honda Crosstour a wagon or an SUV? And what exactly was the Nissan Murano CrossCabriolet? Regardless, those line-blurring cars (or trucks) are out there, and though this one didn't roll off a production line, it's still quite the automotive head-scratcher. Hailing from Missouri, this epic creation is one part mad science experiment, one part 1947 Chevrolet pickup, and one part '95 Mercury Cougar. Add it all up and you get an awesome truck-sports-car hybrid, complete with an outrageous wing and a V8 to boot. And interestingly enough, it's up for sale . RELATED: Check out this Wild-Styled Lamborghini Rat Rod So how does it all come together? According to the listing, the Chevrolet truck cab (which had previously been chopped) was sanded down to bare metal and given a thorough shellacking of clear coat. It was then melded together with the front end of a 1995 Chevrolet S10 pickup truck, and set low to the ground on Bilstein suspension drop spindles. Stance achieved. But instead of fielding an engine from either of those pickups, it pulls its heart from a 2005 Chevrolet Tahoe SUV—a big 5.3-liter V8 heart, that is. It comes backed-up to a GM Turbo 400 automatic transmission. Towards the rear however is where things get really interesting. A Copper Pearl coated tube frame chassis both attaches the rear independent suspension (a la Mercury Cougar) to the racy spoiler, as well as secures the rat rod's rear-mounted radiator, fan, and fuel tank. I'm not quite sure why, but it just looks glorious. RELATED: Reports Say Mid-Engine Corvette Will Arrive in 2018 Inside the vintage cab, the Chevrolet furthers its racing proclivities (it's said to have won burnout and auto-cross events) with a pair of harnessed racing seats, a drift brake, a detachable steering wheel, and a tachometer with oil and temperature gauges, but oddly no speedometer. The shifter is a crescent wrench. And its shift boot? That's a Crown Royal Purple bag. All in all, this grin-worthy Frankenstein creation tallies up bits and pieces from four different vehicles (five if you include the Camaro wheels), which make it truly a mash-up of epic proportions. Internet, what do you think? Related Video: This article by Zach Doell originally appeared on Boldride. Design/Style Chevrolet Mercury Auctions Coupe Special and Limited Editions Classics eBay rat rod