1972 Super Cheyenne Completely Original Motor 350 V8 Ac Tilt on 2040-cars

Auto blog

Weekly Recap: Autonomous driving goes commercial in Nevada

Nevada granted Daimler Trucks North America the first license to run an autonomous commercial vehicle on public roads in the United States Tuesday, marking another milestone in the technology's rapid advancement. Gov. Brian Sandoval and Daimler truck chief Wolfgang Bernhard promptly used the license to lap Highway 15 near Las Vegas in a newly revealed Freightliner Inspiration Truck. It was a clear signal that autonomous driving is big-rig reality, though it's still a long way from widespread use. Nevada certified two of Daimler's Freightliner Inspiration Trucks, which use the company's Highway Pilot system with a stereo camera, radar, and lane-keeping collision-prevention features to regulate the brakes and steering. The radar component has a long-range sensor that can cover 820 feet at an 18-degree angle and a shorter-range unit that stretches 230 feet at a 130-degree angle. The Inspiration trucks are based on the existing Freightliner Cascadia Evolution model used on US roads. In addition to the autonomous technologies, it also has futuristic design cues, including blue lighting in the front and a new hood and grille. While there are only two Freightliner Inspiration trucks in existence, Daimler expects to bring the Highway Pilot system into mass-produced big rigs by 2025, in time to capitalize on the market's predicted growth. The German truckmaker predicts the global hauling market will triple by 2050, and the United States will be a key part of that growth. Trucks carry 69.1 percent the nation's domestic freight tonnage and hauled 9.7 billion tons of freight in 2013, according to the American Trucking Association. Daimler expects autonomous driving to augment this growth, and perhaps evolve the role of the truck driver. Still, the company points out autonomous tech is not meant to replace drivers, but to assist them and relieve fatigue and monotony on long hauls. The driver has to stay in control for passing, in city traffic, and when hooking up the trailer. The company said autonomous driving also offers the potential for improved fuel economy – tests showed a five-percent gain – and lower maintenance costs. Daimler also said the technology could reduce congestion on the road. Much of this is attributable to the constant flow of traffic, which is aided by autonomous driving. While the benefits are becoming increasingly apparent, autonomous technology is still met with skepticism.

Recharge Wrap-up: Detroit Electric teaser video, Nissan Leaf is Good Housekeeping "Tried and Tested"

Detroit Electric has a new teaser video and has updated its brand in preparation of the introduction of the SP:01. The refreshed logo uses a blue and white color palette, and the company has also given its website a new look. The teaser video, which gives a sneak peek at the exterior of the SP:01, shows the car taking form in the midst of an electrical storm. Watch the video or learn more in the press release below. Abengoa is celebrating the grand opening of a commercial scale cellulosic ethanol plant in Hugoton, KS. When running at full scale, the refinery will produce up to 25 million gallons of ethanol a year. The plant will also generate enough electricity to power itself and put some back into the grid. Energy Secretary Ernest Moniz was on hand for the dedication, saying, "Every gallon of cellulosic ethanol produced and used to fuel our vehicles reduces the impact of harmful greenhouse gas emissions by greater than 60 percent as compared to conventional gasoline." Learn more at Energy.gov. Good Housekeeping has named the Nissan Leaf one of its "Tried and Tested" vehicles. The magazine called the Leaf SL its top "Roomy Electric" vehicle in its November issue. The magazine's research institute evaluated the EV based on track and road driving, ergonomics and convenience features. Good Housekeeping made note of the car's "impressive" range, but according to Nissan's Fred Diaz, "the real beauty of the Nissan Leaf is that it's roomy and, best of all, fun to drive." Read more in the press release below. Quasar Energy Group produces compressed natural gas from sewage and garbage. It uses things like grains leftover from brewing Budweiser, food waste from a baseball stadium and sewage sludge to produce the gas through anaerobic digestion. The compressed gas can then be used to power cars like Chevrolet's Bi-fuel Impala, which goes on sale later this year. Chevrolet likens the situation to the Delorean time machine in the Back To The Future movie series, which uses garbage to fuel its fusion generator. Watch the video and read the press release below to learn more. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck