Find or Sell Used Cars, Trucks, and SUVs in USA

1982 Chevrolet Chevy C10 Hot Rod on 2040-cars

Year:1982 Mileage:119000 Color: Black
Location:

Bolton, Connecticut, United States

Bolton, Connecticut, United States
Transmission:Four Speed Manual
Body Type:Pickup Truck
Engine:350
Vehicle Title:Clear
For Sale By:Private Seller
VIN: 2gccc14d6c1207704 Year: 1982
Exterior Color: Black
Make: Chevrolet
Number of Cylinders: 8
Model: C-10
Trim: Custom Deluxe
Cab Type (For Trucks Only): Regular Cab
Drive Type: RWD
Mileage: 119,000
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

1982 Chevrolet C10 Custom Hot Rod


Engine:  350 out of '55 Chevy, I'm told it has 2.02 fuelie heads.  Has Comp Cams 268h cam ( .454 lift, 218 duration, 110lsa) . Edelbrock Performer intake, Edelbrock Thunder AVS 650cfm w/electric choke carb ( brand new, just installed)  Accel billet HEI distributor (brand New, just installed.  Dual electric fans. Ceramic coated long tube headers with bullet race mufflers , 2.25" dual exhaust all the way.

Transmission: Saginaw 4 speed on the floor, Hurst shifter, new clutch.

Rear Differential: unknown gears, turns 2200-2400 at highway speed

Truck is an older restoration.  Rust free to the best of my knowledge. Front lowered with springs and BellTech Spindles, rear lowered with flip kit.  Truck runs fantastic, pulls like an ox, and rides nice. 

Some of the pictures show small motorcycle mirrors, but those were swapped out for standard mirrors, shown in other pics. 

Fuel cell is genuine circa 1960's era, used to be on a dragster. 

Steering wheel is genuine Lecarra.

This trucks is real fun to drive, and turns heads EVERYWHERE.  It's a fan favorite at car shows, and cruising the strip. The new owner will not be disappointed!

(In the interest of full disclosure, the front valence is LOW and in New England it bumps things, so it's not perfect. )

Happy Bidding!







All sales are final.  I am not a car dealer or manufacturer, so there is no warranty.  Vehicle is sold, as-is, in its current condition.  

Auto Services in Connecticut

Valvoline Instant Oil Change ★★★★★

Auto Repair & Service, Auto Oil & Lube, Automotive Tune Up Service
Address: 657 College Hwy, North-Granby
Phone: (413) 569-3459

Uzun Auto ★★★★★

Used Car Dealers, Wholesale Used Car Dealers
Address: 809 1st Ave, West-Haven
Phone: (203) 932-3332

Tire Country Of Manchester Inc ★★★★★

Auto Repair & Service, Tire Dealers, Brake Repair
Address: 266 Middle Tpke W, Ellington
Phone: (860) 646-8350

The New England Classic Car Co ★★★★★

Automobile Parts & Supplies, Antique & Classic Cars, Automobile Performance, Racing & Sports Car Equipment
Address: 1483 Stratford Ave, Stratford
Phone: (203) 377-6746

Superior Automotive Center ★★★★★

Auto Repair & Service, Auto Oil & Lube, Automobile Accessories
Address: 1200 New Litchfield St, Litchfield
Phone: (860) 489-4161

Superior Auto ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Used Car Dealers
Address: 779 Boston Post Rd, Killingworth
Phone: (866) 595-6470

Auto blog

GM Recalls 218,000 Chevy Aveo Models Over Fire-Prone Lighting

Wed, May 21 2014

The recall train keeps on rolling for General Motors. Hot on the heels of its recent 2.4 million-vehicle recall of various models, it's now calling in 218,000 Chevrolet Aveo units from the 2004-2008 model years because they could catch fire. The problem concerns the daytime running light module in the instrument panel. It could overheat, melt and cause a fire. According to GM spokesperson Alan Adler, "We are aware of some fires," and the company "is still investigating." Adler wouldn't comment about how many fires were reported or when the automaker was first aware of this issue because of the ongoing analysis. However, he said the issue has not caused any injuries or fatalities. GM also doesn't have a fix for the problem with the DRL module yet. The company says in its recall statement to the National Highway Traffic Safety Administration that the remedy "is still under development." Adler wasn't sure when it would be ready, but he said Aveo owners would receive notification in the mail "relatively soon." They will receive a second letter later to schedule the repair. In a separate letter about the Aveo's problem to NHTSA (viewable here as a PDF), GM said its Executive Field Action Decision Committee decided to conduct the recall on May 16. Scroll down for the recall report. RECALL Subject : Daytime Running Light Module Overheating Report Receipt Date: MAY 19, 2014 NHTSA Campaign Number: 14V261000 Component(s): Potential Number of Units Affected: 218,000 Manufacturer: General Motors LLC SUMMARY: General Motors is recalling certain model year 2004-2008 Chevrolet Aveo vehicles equipped with daytime running lights (DRL). In the affected vehicles, there may be heat generated within the DRL module located in the center console in the instrument panel, which could melt the DRL module. CONSEQUENCE: If the DRL module melts due to the heat generation, it could cause a vehicle fire. REMEDY: The remedy for this recall campaign is still under development. The manufacturer has not yet provided a notification schedule. Owners may contact General Motors customer service at 1-800-222-1020 (Chevrolet). General Motors recall number for this campaign is 14236. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Weekly Recap: BMW rolls out ambitious plug-in hybrid electric plan

Sat, Dec 6 2014

"We believe that for the United States, this is going to be very important." – Julian Arguelles Let there be no doubt, BMW is serious about electric vehicles. The German automaker said this week it will make plug-in hybrid versions of all of its core models, an aggressive move that demonstrates its commitment to electric propulsion systems. BMW did not specify which vehicles will get the plug-in systems or provide a timeline for when they will arrive. But the announcement is clearly more than blustering, and the company revealed a 3 Series plug-in prototype this week at an event in France. BMW said the 3 Series uses a version of its 2.0-liter turbocharged four-cylinder engine (240 horsepower, 300 pound feet of torque) with an electric motor sandwiched between the engine and transmission in place of the torque converter. It has an all-electric range of 22 miles. A plug-in X5 with the same powertrain was also displayed alongside the 3 Series, though the X5 has been on the auto-show circuit for more than a year, including a recent stop in Los Angeles. Those two vehicles use "eDrive," and BMW's plans represent the first widespread transfer of its technology from development of the i3 and i8 models to more mainstream products. BMW said it's developing electric powertrains so they can be deployed rapidly across its range, and they are flexible enough to be used with fuel cells in future products. Enticingly, BMW is also working on a "Power eDrive" system, which debuted in a 5 Series GT concept at the event in France. This setup has two electric motors powered by a 20-kilowatt-hour battery pack, and when teamed with a four-cylinder turbo, pump out about 670 hp. Reinforcing BMW's commitment, the company will add more than 200 jobs at its factory in Dingolfing, Germany, to support electric-vehicle development. The moves come as BMW and other automakers diversify their portfolios while fuel economy and emissions regulations are getting tighter around the world. The United States has set a 54.5-mpg CAFE requirement for the 2025 model year. BMW said the electric vehicles were developed with an eye toward the US market, its government policies and its wide-ranging commuting styles. "We believe that for the United States, this is going to be very important," spokesman Julian Arguelles said. Ben Scott, a senior analyst in London with automotive research firm IHS, said BMW's moves are expensive – but necessary – to keep pace with the market.

GM to squeeze out more production capacity for midsize trucks

Tue, May 26 2015

General Motors was predicting a strong showing for the Chevrolet Colorado and GMC Canyon before they debuted, and demand among dealers for the midsize trucks even exceeded company's expectations. The positive situation has left GM with a problem, though: finding ways to increase capacity for the pickups at the Wentzville Assembly plant in Missiouri. With a third shift already running, GM has continued to look for ways to build just a few more of the trucks at the plant. The company has plans to hire as many as 1,000 more workers for the Saturday and Sunday shifts to construct an additional 2,000 pickups a month, according to unnamed insiders at the factory speaking to Automotive News. The little adjustments even extend to getting rid of an unpaid break to add 18 minute of assembly time over the course of a day, which equals about 3,500 more vehicles a year. All of this effort comes because the trucks are in such high demand. According to GM's figures, the company has delivered a combined 35,720 units of the Colorado and Canyon from January through April 2015, and the Chevy was the fastest-selling truck in the US for the previous three months. In May, it spent an average of just 12 days in showrooms before being snapped up. And even better for the company, 43 percent of these buyers came from other brands. According to Automotive News, the most popular trade-ins have included the Ford F-150, Toyota Tacoma, and Dodge Dakota. Related Video: