Find or Sell Used Cars, Trucks, and SUVs in USA

1997 Chevrolet Blazer Base Sport Utility 4-door 4.3l on 2040-cars

Year:1997 Mileage:179890 Color: Green /
 Tan
Location:

Cumberland, Maryland, United States

Cumberland, Maryland, United States
Transmission:Automatic
Body Type:Sport Utility
Engine:4.3L 262Cu. In. V6 GAS OHV Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
For Sale By:Private Seller
VIN: 1gndt13w2v2171818 Year: 1997
Number of Cylinders: 6
Make: Chevrolet
Model: Blazer
Trim: Base Sport Utility 4-Door
Warranty: Vehicle does NOT have an existing warranty
Drive Type: 4WD
Options: 4-Wheel Drive
Mileage: 179,890
Safety Features: Anti-Lock Brakes, Driver Airbag
Exterior Color: Green
Interior Color: Tan
Condition: UsedA vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections.Seller Notes:"small dents and scratches regular wear from time"

This vehicle is a 1997 chevy blazer 4x4. It has 180,000 miles on it with some small dents dings and some scratches from time but nothing major.The interior is all tan. The front tires have about 50% tread left and Rear about 80%. It is also free of any major rust. the transmission and 4 wheel drive work without any problems. The reason im selling is because we were told the noise it is making in the engine is the crank bearing so our best bet would be to have a new motor put in it. We decided to get another much newer vehicle and just sell this one out right. buyer is responsible for picking up, shipping, or transporting after auction is over. Vehicle is sold as is  

Auto Services in Maryland

Vision Autographics ★★★★★

Automobile Body Repairing & Painting, Truck Body Repair & Painting
Address: 2595 Hanco Center Dr, Marbury
Phone: (703) 590-8525

Virginia Tire & Auto of Cascades ★★★★★

Auto Repair & Service, Used Car Dealers, Automobile Parts & Supplies
Address: 46655 Algonkian Parkway, Potomac
Phone: (703) 433-5062

The Mobile Mechanic ★★★★★

Auto Repair & Service
Address: 6515 Pebble Brooke Rd., Govans
Phone: (410) 358-5845

Standard Auto Parts ★★★★★

Automobile Parts & Supplies, Automobile Accessories, Automobile Parts, Supplies & Accessories-Wholesale & Manufacturers
Address: 2020 Hollins Ferry Rd, Curtis-Bay
Phone: (443) 853-1735

Spiering`s Garage Inc ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Inspection Stations & Services
Address: 13281 Greensboro Rd, Marydel
Phone: (410) 482-2238

Self Service Auto Repair ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Automobile Electric Service
Address: 7721 Baltimore Annapolis Blvd, Harmans
Phone: (410) 787-9221

Auto blog

This is your 2014 Chevrolet SS

Sat, 16 Feb 2013

Think you've waited long enough for this? If so, then you'll want to savor the high-res photos we've so far been given of the 2014 Chevrolet SS, the first rear-wheel-drive performance sedan from The Bowtie in 17 years.
We all know its our version of the brand new VF-model Holden Commodore, but what's under the hood that earns the appellation "performance?" A 6.2-liter LS3 V8 engine producing 415 horsepower and 415 pound-feet of torque. That's 35 hp and lb-ft less than the same engine is expected to produce in the 2014 Chevrolet Corvette. Chevrolet says the sedan will get from 0-to-60 miles per hour "in about five seconds."
Shifting comes courtesy of a six-speed automatic with paddles on the steering wheel, while stopping arrive via four-piston Brembo calipers up front, a single sliding piston in back. The forged aluminum wheels are 19-inchers all around, each set supporting right around 50 percent of the sedan's weight, and the aluminum hood and trunk are meant to keep the center of gravity low.

GM to squeeze out more production capacity for midsize trucks

Tue, May 26 2015

General Motors was predicting a strong showing for the Chevrolet Colorado and GMC Canyon before they debuted, and demand among dealers for the midsize trucks even exceeded company's expectations. The positive situation has left GM with a problem, though: finding ways to increase capacity for the pickups at the Wentzville Assembly plant in Missiouri. With a third shift already running, GM has continued to look for ways to build just a few more of the trucks at the plant. The company has plans to hire as many as 1,000 more workers for the Saturday and Sunday shifts to construct an additional 2,000 pickups a month, according to unnamed insiders at the factory speaking to Automotive News. The little adjustments even extend to getting rid of an unpaid break to add 18 minute of assembly time over the course of a day, which equals about 3,500 more vehicles a year. All of this effort comes because the trucks are in such high demand. According to GM's figures, the company has delivered a combined 35,720 units of the Colorado and Canyon from January through April 2015, and the Chevy was the fastest-selling truck in the US for the previous three months. In May, it spent an average of just 12 days in showrooms before being snapped up. And even better for the company, 43 percent of these buyers came from other brands. According to Automotive News, the most popular trade-ins have included the Ford F-150, Toyota Tacoma, and Dodge Dakota. Related Video:

GM Design shows what could have been and what might be

Thu, May 27 2021

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video: