1983 Chevrolet K5 Blazer W/ Rebuilt Transmission on 2040-cars
Tooele, Utah, United States
Body Type:SUV
Vehicle Title:Clear
Engine:305
Fuel Type:Gasoline
For Sale By:Private Seller
Year: 1983
Make: Chevrolet
Model: Blazer
Trim: utility
Options: 4-Wheel Drive
Power Options: Power Windows
Drive Type: 4x4
Mileage: 98,000
Exterior Color: White
Disability Equipped: No
Interior Color: Gray
Warranty: Vehicle does NOT have an existing warranty
Number of Cylinders: 8
i paid over 900 for all this truck and parts, i put a newer 305 engine in that has 98,000 miles on it, and purchased a 4x4 turbo 350 transmission that had been rebuilt and was used less then 9,000 miles and i put in a brand new radiator. previous owner had started the project and swapped out the interior for newer grey seats and interior fabric, and rear panels put a newer 12 bolt rear end and new brake valve cylinder and brake pads. there is rust in multiple spots on and under the doors. front left fender is dented and passenger side door is dented. the truck will need new a windshield, new tires, wiring and timing finished, a battery, and some interior work and some other things done i am sure, so please be aware this is a parts truck / project truck and will need to be put on a trailer/tow truck and does not currently run (engine does turn over with starter just fine). has dual shocks in front end. comes with lots of extra parts, dual exhaust cut out from another blazer. replacment window for rear left shell window and seal. 2 a/c unit pumps with hoses+ more. any questions please ask. buyer is responsible for pickup or delivery.
|
Chevrolet Blazer for Sale
- 1999 chevrolet blazer ls -leather v6 suv 4wd with 98k miles(US $3,400.00)
- 2000 chevrolet blazer cheap
- Bank repo wholesale cheap mechanic special clean chevy sunroof leather lt 4x4(US $1,950.00)
- 1988 chevrolet s10 blazer tahoe sport utility 2-door 4.3l
- 1984 chevrolet k5 blazer 4x4 lift excellent straight body no rust. 350 hi perf(US $11,855.00)
- 1971 chevrolet k5 blazer
Auto Services in Utah
Utah Window Tinting ★★★★★
Utah Valley Tire Inc ★★★★★
Turn Key Service Tech INC ★★★★★
Turn Key Service Tech ★★★★★
Sunburst Automotive Repair ★★★★★
Rocky Mountain Collision of West Valley City ★★★★★
Auto blog
Meet the mother-daughter team that's worked on almost every Chevy Volt
Sun, May 11 2014It's Mother's Day, and we're soft enough we love our mothers enough to share a new video from General Motors with you. In it, we meet Monique Watson (left) and Evetta Osbourne, a mother-daughter team that works at the Detroit-Hamtramck Assembly where GM makes the Chevy Volt (along with all of GM's other plug-in hybrids: the Opel Ampera, Holden Volt and Cadillac ELR). The two work side-by-side and have installed the lithium-ion battery pack on almost all of those vehicles - nearly 80,000 of them - since GM started making the pre-production Volts in 2009. In a prepared statement, Watson said that she likes working next to her mom, day in and day out, and they the two are totally in sync when it comes to putting the 400-pound, 16.5-kWh packs into the vehicle undersides. They two can also share stories throughout the day, and Watson said, "The arrangement has absolutely improved our relationship." Osborne started working at Detroit-Hamtramck in 1999, Watson since 2006. If you're driving a Volt today, you probably have them to thank for doing a bit of the work putting your car together. See a short video of them in action below. It's Always Mother's Day for Detroit-Hamtramck Duo Mother, daughter install lithium-ion battery pack in nearly all GM electric vehicles 2014-05-08 DETROIT – For Detroit resident Evetta Osborne, every day is Mother's Day. That's because she literally works side by side with her daughter, Monique Watson, at General Motors' Detroit-Hamtramck assembly plant. They have installed the lithium-ion battery pack on nearly every Chevrolet Volt, Opel Ampera, Holden Volt, and Cadillac ELR since production began. In fact, apart from vacation days and an occasional sick day, the mother-daughter duo has installed almost every battery pack since the Volt was in pre-production in 2009. The ELR launched earlier this year. All told – including Ampera – that's more than 80,000 electric vehicles. "We're a good team and our relationship is secondary when it comes to performing our jobs – but it's great to work alongside my daughter, said Osborne, a mother of five. Because the battery packs weigh more than 400 pounds each, automatic guided vehicles – robotic carts that use sensors to follow a path through the plant – deliver them just as the vehicle body structures glide into position overhead. The carts then lift the T-shaped packs, and Osborne and Watson guide them into the chassis and secure each one with 24 fasteners.
Chevy shows much-improved 2014 Corvette interior in new video
Mon, 11 Feb 2013If you want a closer look at what went into designing and building the interior for the 2014 Chevrolet Corvette, we've got just the thing. General Motors has released a new video detailing the cabin's evolution from conception to execution, complete with commentary from Ryan Vaughn, performance car interior design manager with Chevrolet. The quick clip details how manufacturing, engineering and design within General Motors worked together from the first sketches to ensure no compromises had to be made later down the line. How novel.
With plenty of hides traced with contrast stitching and available real carbon fiber trim, the cabin looks to be a few hundred miles ahead of the C6. Given how readily critics derided the previous generation for its cabin, the C7 should make writers work a little harder to find something to complain about. Check out the video below for yourself.
Weekly Recap: GM plans massive new paint shop at Chevy Corvette factory
Sat, May 23 2015General Motors is laying out some serious green to maintain the Chevy Corvette's expansive color palette. The automaker is breaking ground on a new paint shop this summer that's part of a $439-million investment to upgrade the 34-year-old Bowling Green, KY, factory that builds the Stingray. The massive new structure will total 450,000 square feet, nearly half the size of the current 1-million square-foot facility. Construction is expected to take two years and won't impact Corvette production. The upgrades include new robots that save paint and create a better finish, longer, more efficient ovens to bake in the finish, and LED lighting. There's also a dry scrubbing booth technology with a limestone handling system that eliminates waste. GM has invested $135 million in the factory in last four years for the changeover to build the C7 and to relocate its Performance Build Center to Bowling Green. The improvements continue to modernize the Kentucky factory, which has become a tourist attraction in its own right, as more than 56,000 enthusiasts visited it last year. The upgrades are part of a $5.4-billion investment GM confirmed in April that will remake its US footprint in the next three years. The Bowling Green expansion underscores GM's continued commitment to the Corvette, which sold nearly 38,000 copies around the world last year, an eight-year high. "With this major technology investment, we can continue to exceed the expectations of sports car buyers for years to come," North American manufacturing manager Arvin Jones said in a statement. OTHER NEWS & NOTES Takata recall hits 34 million vehicles The National Highway Traffic Safety Administration expanded the Takata airbag recall to an almost unthinkable 34 million vehicles on Tuesday. The recall is part of an agreement reached by the two sides where Takata admitted some of its airbag inflators have a defect, and the deal compels the company to comply with all future regulatory actions and investigations. Takata's airbag inflators were produced with "a propellant that can degrade over time" and lead to ruptures, NHTSA said. Six deaths have been attributed to the flaw worldwide. Investigations conducted by Takata, automakers, and others have not determined the exact cause of the inflator problem, but NHTSA said moisture appears to alter the propellant's chemical structure. It then ignites too rapidly, creates too much pressure that ruptures the inflator, and blasts shards of metal at passengers.
2040Cars.com © 2012-2024. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Use of this Web site constitutes acceptance of the 2040Cars User Agreement and Privacy Policy.
0.038 s, 7783 u