Find or Sell Used Cars, Trucks, and SUVs in USA

Nice 1957 Chevy Wagon Corvette 350 Engine And Turbo 350 Tranny Rust Free on 2040-cars

Year:1957 Mileage:63120 Color: CANYON CORAL /
  WHITE/BLACK
Location:

Boise, Idaho, United States

Boise, Idaho, United States
Advertising:
Transmission:Automatic
Body Type:Wagon
Engine:CORVETTE 350
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Dealer
VIN: B57T166964 Year: 1957
Interior Color: WHITE/BLACK
Make: Chevrolet
Number of Cylinders: 8
Model: Bel Air/150/210
Trim: WAGON
Warranty: Vehicle does NOT have an existing warranty
Drive Type: RWD
Mileage: 63,120
Sub Model: WAGON
Exterior Color: CANYON CORAL
Condition: UsedA vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections.Seller Notes:"GREAT RUST FREE SOLID BODY CAR"

THIS IS A VERY NICE RUNNING AND LOOKING 1957 CHEVROLET WAGON. IT IS A 3 OWNER IDAHO RUST FREE CAR. IT WAS RESTORED 8 YEARS AGO. A REBUILT CORVETTE 4 BOLT MAIN 350 MOTOR ALONG WITH A REBUILT 3 SPEED TURBO 350 TRANSMISSION WAS PUT IN AT THAT TIME. IT NOW HAS A LITTLE OVER 63K MILES. AT THAT TIME THE CAR WAS REPAINTED BACK TO ITS ORIGINAL CANYON CORAL AND THE INTERIOR WAS REDONE BACK TO ITS FACTORY SPECS, WHITE/BLACK. THE CAR WAS RESTORED TO BE A DAILY DRIVER AND NOT A SHOW CAR. THE CARS SUSPENSION AND BRAKES WERE REDONE. POWER BRAKES WERE INSTALLED. EVERYTHING WORKS IN THE CAR. LIGHTS, TURN SIGNALS, WIPERS, RADIO, ECT. THE CAR IS COMPLETELY RUST FREE. NONE OF THE BODY PANELS, FLOOR PANELS, OR TRUNK PANELS HAVE EVER BEEN CHANGED. THEY ARE ORIGINAL AND RUST FREE. HAS CRAGAR WHEELS ON IT. THE WAGON DRIVES GREAT.

I WILL HAVE THE CAR FOR SALE LOCALLY AND ON OTHER SITES SO I HAVE THE RIGHT TO CANCEL THE AUCTION AT ANY TIME IF IT SELLS. IF YOU WOULD LIKE TO KNOW THE ASKING PRICE OR HAVE ANY OTHER ADDITIONAL QUESTIONS, YOU MAY CALL AT CELL# 208-697-7878

OR OFFICE# 208-258-9858

I AM AN IDAHO DEALER SO IN STATE BUYERS WILL BE SUBJECT TO TAX, TITLE, AND DOC FEES. NO FEES FOR OUT OF STATE OR OUT OF COUNTRY BUYERS. 

Auto Services in Idaho

Western Transmission ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Transmission
Address: 1410 N Skyline Dr, Idaho-Falls
Phone: (208) 243-8869

T & J Trans & Auto Repair ★★★★★

Auto Repair & Service
Address: 181 Industrial Ln, Pocatello
Phone: (208) 238-1190

Smiles Automotive ★★★★★

Auto Repair & Service
Address: 720 N State St, Weston
Phone: (208) 852-7130

Precision Auto Body ★★★★★

Automobile Body Repairing & Painting
Address: 685 W 6th S, Mtn-Home
Phone: (208) 587-4002

Kelly`s Repair ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automotive Alternators & Generators
Address: 891 S 2250 E, Hazelton
Phone: (208) 329-5692

Joslin Auto Repair ★★★★★

Auto Repair & Service
Address: 416 E Lewis, Inkom
Phone: (208) 233-1014

Auto blog

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

Thu, Dec 7 2017

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

Why Cadillac thinks it needs to succeed in Europe to sell cars elsewhere

Tue, 26 Feb 2013

Ward's Auto has taken an interesting look at the renewed focus General Motors is showing towards Cadillac in Europe. Susan Docherty, president and managing director of Chevrolet and Cadillac in Europe (pictured), says in order for the luxury brand to thrive in China, it first needs to succeed in the old country. The reason? Chinese buyers look to Europe for cues as to what's deemed worthy of the term "luxury." There are hurdles to the plan, however. In addition to the fact that the EU is flooded with high-end nameplates, GM doesn't necessarily have the distribution network in place to put buyers behind the wheel.
Combine that with persistent economic woes and Cadillac's checkered past marred by a lack of diesel engine options and a bankrupt distributor, and the road ahead for the brand looks like less of an uphill climb and more like a straight-up cliff face. But Docherty is optimistic and says she has a plan for the brand. We recommend heading over to Ward's for a closer look at the full read.

A car writer's year in new vehicles [w/video]

Thu, Dec 18 2014

Christmas is only a week away. The New Year is just around the corner. As 2014 draws to a close, I'm not the only one taking stock of the year that's we're almost shut of. Depending on who you are or what you do, the end of the year can bring to mind tax bills, school semesters or scheduling dental appointments. For me, for the last eight or nine years, at least a small part of this transitory time is occupied with recalling the cars I've driven over the preceding 12 months. Since I started writing about and reviewing cars in 2006, I've done an uneven job of tracking every vehicle I've been in, each year. Last year I made a resolution to be better about it, and the result is a spreadsheet with model names, dates, notes and some basic facts and figures. Armed with this basic data and a yen for year-end stories, I figured it would be interesting to parse the figures and quantify my year in cars in a way I'd never done before. The results are, well, they're a little bizarre, honestly. And I think they'll affect how I approach this gig in 2015. {C} My tally for the year is 68 cars, as of this writing. Before the calendar flips to 2015 it'll be as high as 73. Let me give you a tiny bit of background about how automotive journalists typically get cars to test. There are basically two pools of vehicles I drive on a regular basis: media fleet vehicles and those available on "first drive" programs. The latter group is pretty self-explanatory. Journalists are gathered in one location (sometimes local, sometimes far-flung) with a new model(s), there's usually a day of driving, then we report back to you with our impressions. Media fleet vehicles are different. These are distributed to publications and individual journalists far and wide, and the test period goes from a few days to a week or more. Whereas first drives almost always result in a piece of review content, fleet loans only sometimes do. Other times they serve to give context about brands, segments, technology and the like, to editors and writers. So, adding up the loans I've had out of the press fleet and things I've driven at events, my tally for the year is 68 cars, as of this writing. Before the calendar flips to 2015, it'll be as high as 73. At one of the buff books like Car and Driver or Motor Trend, reviewers might rotate through five cars a week, or more. I know that number sounds high, but as best I can tell, it's pretty average for the full-time professionals in this business.