1958 Chevrolet Bel Air Impala on 2040-cars

Auto blog

Top 11 Lego Technic cars to buy on Amazon in 2024

Autoblog may receive a share from purchases made via links on this page. Pricing and availability are subject to change. I recently got a birthday wish list from my 11-year-old nephew, and I couldn't help but smile when I saw “Lego Technic Cars” at the top. Lego isnÂ’t a phase, itÂ’s a lifestyle. Once a Lego fan, always a Lego fan. In fact, IÂ’d be willing to bet that many of you reading this right now have some kind of Lego vehicle in a box somewhere, or better yet, on display in your home. While theyÂ’re not necessarily cheap, getting into building Lego Technic vehicles doesnÂ’t have to bankrupt you, either, unless you go for the $400 Lamborghini right off the bat. Here are 11 of our favorite Lego Technic vehicles on Amazon, right now, ranging from an affordable $35 all the way up to $450. LEGO Technic Ford Mustang Shelby GT500 Ages 9+ (544 Pieces) - $39.99 (20% off) One of my first and favorite model cars growing up was a first-gen Ford Mustang GT350, so this GT500 for under $40 is right up my alley. At 544 pieces and made for ages 9 and up, the GT500 is a considerable step up from Grave Digger but a great starter to a Technic collection nonetheless. It isnÂ’t the most accurate-looking vehicle in this list, but the AR app and the fact that it can drive make it a worthwhile purchase. $39.99 at Amazon LEGO Technic Formula E Porsche 99X Electric Ages 9+ (422 Pieces) - $49.99 Not a Ford fan? Not a problem. This Formula E Porsche 99X is the same price and better looking than the GT500. Even though there are 122 fewer pieces in this Porsche set, it has a level of detail seen in much more expensive Technic sets including numerous decals and a pull back motor.  $49.99 at Amazon LEGO Technic Jeep Wrangler Ages 9+ (665 Pieces) - $54.99 This is the set I ended up going with for my nephew, not because I think it is the coolest, but because for the price, I think you get the most bang for your buck. 665 pieces is over 50% more than the comparatively priced Porsche 99X and it also scratches the nostalgia itch for me: The first-ever model vehicle I built was a yellow Jeep Wrangler Sahara. This Wrangler Rubicon has definitely had some aftermarket mods like the front winch, which makes it one of the coolest Technic sets under $60.  $54.99 at Amazon LEGO Technic Monster Jam Grave Digger Ages 7+ (212 Pieces) - $34.16 If ever there was a gateway Lego Technic, this Grave Digger is it.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.