1956 Chevrolet Belair 2dr Hardtop on 2040-cars

Auto blog

eBay Find of the Day: 1990 Chevy 1500 454 SS with just 7 miles

When trawling the classifieds either on a buying mission or merely a time-wasting mission, we spend a lot of time poring over photographs comparing the seller's idea of "Like New!" with our idea of it. It's hard to argue with seven original miles on the odometer, though, which is what this 1990 Chevrolet 1500 454 SS has. It's being sold by Country Chevrolet on eBay, the same dealer who sold the truck to its one and only owner 25 years ago. The purchaser bought two of them and left this one in a garage under a car cover, said garage being less than seven miles away from the showroom floor. Better yet, you can buy with confidence because the seller "has collected all records," which we expect would be the slimmest manilla folder in the history of receipt-keeping. For those unfamiliar, the 454 SS was a half-ton, regular cab, 2WD pickup powered by a 454 cubic inch (7.4-liter) V8 with 230 horsepower and 385 pound-feet of torque shifting through a three-speed transmission. This was at the same time the Chevrolet Corvette used a 5.7-liter V8 producing 250 hp and 350 lb-ft. The pickup rode on exclusive wheels and only came in black with red cloth inside. The only extra-cost option on this example is an $18 locking fuel filler cap, which, according to the 454ss forum, means it should have cost about $18,460 out the door, the equivalent of about $34,000 today. At the time of writing there are zero bids, but proceedings open at $45,000 and Country Chevrolet wants $49,000 if you have to have your time capsule right now.

Driving Granatelli's turbine-powered 1978 Chevy Corvette [w/video]

With its curvy snout and feminine haunches, the third-gen Chevrolet Corvette looks like a dreamy – if dated – exemplar of Sports Car Fantasy 101 when viewed through modern eyes. This particular specimen circa '78, clad in silver and black paint with red pinstripes, appears to be a well-preserved example from the era. Apart from its low-profile Pirellis, slightly raised and slotted hood, spacious stance and a certain hand-painted descriptor alongside its crossed flag logos, you'd never guess there's a Space-Age propulsion unit powering this Coke bottle-bodied ride. Climb inside, and you're presented with aircraft gauges and big, colorful square buttons in the center panel. It takes a push of the "Ignitor" button, a tap of the starter button, and a slide of a T-handle for this nearly 40-year-old sports car to start sounding like Gulfstream G650 ready for takeoff. Yep, you're sitting in an 880-horsepower, turbine-powered Corvette, the only one of its kind in the world. Welcome to the whoosh. What The...? Built by Vince Granatelli, son of Indy 500 guru Andy Granatelli, this curious Corvette came into being by cramming a Pratt & Whitney ST6N-74 gas turbine engine into the donor car's lengthy front end. The same type of Jet A-burning mill powered Granatelli Senior's STP-sponsored racecar at the 1967 Indianapolis 500, where it famously led most of the 198 of 200 laps until a $6 transmission bearing failed, knocking it out of the race. The idea of turbine power usurping internal combustion was so threatening that Indy's governing body restricted turbine performance into obsolescence thereafter. A turbine-powered Corvette sounds excessive because it is. But there are also things about this 880-horsepower, 1,161-pound-feet monster that might surprise you. While it smacks of futurist exoticism and cost a then-dizzying $37,000 in 1967, the Canadian-built powerplant uses 80 percent fewer parts than an internal combustion V8 and will run on virtually anything combustible – whiskey, diesel, even Chanel No. 5. Though it's triple the length of a V8, the Pratt & Whitney beast weighs only 285 pounds. It's also one hell of a robust workhorse, typically serving as an auxiliary power unit for commercial aircraft or a generator in oil fields, where it can run for tens of thousands of consecutive hours before needing an overhaul. To adapt the Chevrolet for jet duty, the nose section was gutted and a sub-frame was built to compensate for the loosey-goosey front end.

Watch the National Corvette Museum sinkhole being filled in by R/C cars

Okay, so not exactly cars, but Bobcats - but still quite cool. You might remember that the National Corvette Museum had that little divot that needed to be filled in. Turns out the construction firm of Scott, Murphy & Daniel doing the work is using two remote-controlled Bobcats to fill the sinkhole with "manufactured sand," which in this case is crushed limestone. It appears that the Bobcat company has offered remote operation since at least 2007 via a wireless transmitter that works up to 1,500 feet away. So yes, that means two SMD employees stand on the edge of the pit and flick joystick levers for hours at a time, one in charge of a Bobcat with a roller-compactor attachment, the other in charge of a Bobcat with a bucket. And that, to us, is a pretty good way to earn the daily bread. Check out the video above for the latest sinkhole update. News Source: National Corvette Museum via YouTube Auto News Weird Car News Chevrolet GM Videos rc car remote control National Corvette Museum bobcat ncm