1955 Chevrolet Del Rey Two Door on 2040-cars
Clovis, California, United States
Engine:Supercharged V8
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
Exterior Color: Black
Make: Chevrolet
Interior Color: Black
Model: Bel Air/150/210
Number of Cylinders: Supercharged eight
Trim: Del Rey
Drive Type: Pro Street style Custom
Mileage: 256
I have a beautiful one of a kind 55 Chevy. There is so much done to this car I hope I can get it all in. Drive train is a small block 305 TunePort roller motor completly rebuilt 30 over stock. Last year I removed the Injection. I had the heads re-drilled to accept an early B&M Supercharger which I had specially built by Supercharger USA in SoCal. It is mated to a custom Pro built 700R4 trans followed by a 9" which I had narrowed 10" and fitted with custom axles. Note; I did not put Posi in this car, didn't want it. But easily remidied.I am not sure of the gear ratio, it's been to long, but I believe it's a 370. The exhaust is also special. It is a custom full breathing single exhaust with a Dynomax muffler followed by a custom built exhaust tip. Cooling is done by an aluminum cross flow with dual low profile electric fans. Now interior, Custom leather interior on late model seats with power driver seat and console. Black Smoke logo embroided on front seats. B&M floor shifter. Dash covered in leather with doubled stitched edge. Dakota Digital dash with clock. Over head forward console with digital clock,sunglass holder and map lights.Power windows with no vent windows. Power pop doors both remote operated. Aluminum dash trim. Tilt column W/ custom Flame Wheel. Vintage air and heat. Custom made right dash lit speaker insert. Flame rear view mirror. Sound system. 10" rear Base speaker with four 6x9 kickers run by a Kenwood Flip Face AM/FM/CD and fueled by two chrome Audiobahn amps in the trunk. Also in the trunk I have mounted a DVD/TV with a small vidio screen and it has it's own seperate sound system. Trunk is carpeted with custom made sides and front panels. Electrical system is a Highway 24 trunk mounted and coded wires. Also in the trunk is the Remote control system that operates Front Windows,Doors,Electric pull down trunk lock and the Power Gas Door. Exterior is shaved of all locks and door handles lower Stainless trim, Hood Bird and emblems. CPP power steering,chrome A/C compressor, Engine has chrome and aluminum trim with a very cool Spectre air cleaner. This Car was sold in Fresno and has never been out of California so it is rust and accident free. Contact for questions on this show winner. $57k OBO or possible trade for mid 2000 class a diesel pusher .Thank you for viewing.
Chevrolet Bel Air/150/210 for Sale
- 1957 chevrolet bel air hard top no post life long california car $12,900
- Chevy bel air 1956 2 door coupe
- Excellent conditition, garaged, blue, disc brakes, a/c, 3 speed manual, 4 door
- 1957 chevy creation/ custom upholstery super 400 small block 700r4 transmission
- 1956 chevy belair 2dr. hardtop
- 1955 chevy 210 sedan
Auto Services in California
Zoe Design Inc ★★★★★
Zee`s Smog Test Only Station ★★★★★
World Class Collision Ctr ★★★★★
WOOPY`S Auto Parts ★★★★★
William Michael Automotive ★★★★★
Will Tiesiera Ford Inc ★★★★★
Auto blog
Next-gen Chevy Silverado and GMC Sierra may use carbon fiber
Thu, Dec 7 2017It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck
Pony cars, trucks and Italian SUVs | Autoblog Podcast #552
Fri, Aug 31 2018On this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Senior Editor Alex Kierstein and Associate Editor Reese Counts. We discuss the updated 2019 Chevy Camaro Turbo 1LE variant, the new 2019 GMC Sierra Denali, and the Ferrari-powered Maserati Levante GTS. We also debate whether Volkswagen should build the Atlas-based Tanoak pickup truck and what a delay means for the next-gen Ford Mustang. Finally, we answer a reader question about the state of Lexus.Autoblog Podcast #552 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown 2019 Chevy Camaro Turbo 1LE 2019 GMC Sierra 2019 Maserati Levante GTS Should Volkswagen build the Tanoak? Next-gen Ford Mustang delayed The past, present and future of Lexus Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video: Podcasts Chevrolet Ford GM GMC Lexus Maserati RAM Truck Coupe SUV Luxury Performance
First 2015 Chevy Corvette Z06s en route to owners [w/video]
Tue, Dec 2 2014Pretty much right on schedule, Chevrolet has begun shipping the very first customer examples of its 650-horsepower, supercharged Corvette Z06. In fact, according to General Motors, the earliest Z06s could be in customer hands by the end of this week. "It has been an incredible opportunity to work on Chevy's most capable model," said Jeff Lamarche, manager of Chevy's Bowling Green Assembly plant. "It truly is an amazing car, and we're thrilled to get them into the hands of our eager customers." Prices for the Z06 start at $78,995 for the hardtop model, while the first-ever Z06 Convertible kicks off at $83,995. Take a look below for the official press release from Chevrolet, and while you're down there, we've slipped in a new video of Corvette Racing's Tommy Milner taking a hot lap of Road Atlanta in a Z06, complete with some Performance Data Recorder footage. First 2015 Corvette Z06s on Their Way to Customers Most capable model in Chevrolet's history now shipping from Bowling Green BOWLING GREEN, Ky. – Chevrolet is now shipping the all-new 2015 Corvette Z06 coupe from Bowling Green Assembly and some early customers could receive the much-anticipated supercar later this week. "It has been an incredible opportunity to work on Chevy's most capable model," said Jeff Lamarche, plant manager of General Motors' Bowling Green Assembly plant, "It truly is an amazing car, and we're thrilled to get them into the hands of our eager customers." The new Corvette Z06 offers the most choice for customers in the model's history. It is the first Z06 to offer an available eight-speed paddle-shift automatic transmission and, thanks to a stronger aluminum frame, a removable roof panel. In addition, it is the first time since 1963 that the Z06 is available as a convertible – which will arrive in early 2015. The new LT4 supercharged 6.2L V-8 engine is SAE-certified at 650 horsepower (485 kW) at 6,400 rpm and 650 lb-ft of torque (881 Nm) at 3,600 rpm – making the 2015 Corvette Z06 the most powerful production car ever from General Motors and one of the most powerful production cars available in the United States. To balance performance and efficiency, the LT4 leverages a trio of advanced technologies – direct injection, Active Fuel Management (cylinder deactivation) and continuously variable valve timing –with a new, more efficient supercharger. The LT4 helps make the Corvette Z06 the most capable car in the brand's history.